A global leader in broadband satellite technology and managed network services, providing connectivity solutions for consumers, enterprises, and governments worldwide.
Hughes Network Systems, LLC (Hughes) is a premier provider of satellite broadband and managed network solutions. Operating under the flagship consumer brand Hughesnet, the company connects millions of people across the Americas helping to bridge the digital divide. Beyond consumer internet, Hughes delivers enterprise-grade connectivity, including Low Earth Orbit (LEO) and Geostationary (GEO) satellite systems, BGAN terminals, and secure network access products for businesses and governments.
Headquartered in Germantown, Maryland, Hughes creates hardware and services that enable global voice, data, and video transmission. Their product portfolio ranges from VSAT terminals and high-throughput satellite modems to advanced software-defined networking platforms. Hughes continues to innovate in the multi-transport ecosystem, integrating satellite and terrestrial technologies to provide reliable, always-on connectivity anywhere in the world.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Power on the terminal and wait for the self-test. Once in pointing mode (LEDs flashing), use the Web UI or audio indicators to adjust the antenna direction until you achieve the highest possible signal strength (typically 51-55 dB), then lock the antenna position.
Common default IP addresses for the local user interface (LUI) are 192.168.128.100 (for models like the 9502) or 192.168.100.1 (for LEO terminals like the HL1100W). check your specific device label.
To comply with RF exposure limits, maintain a distance of at least 3 feet (approx. 1 meter) from the radiating surface of the antenna while it is transmitting.
No, the Indoor Units (IDU) are typically not water-resistant. They must be kept dry to prevent electrical shock or permanent damage.
Connect a computer or smart device to the terminal via Ethernet or Wi-Fi (if supported), then open a web browser and enter the terminal's default IP address (e.g., 192.168.0.1 or 192.168.100.1).