FuseBox manufactures high-quality electrical components, including consumer units, RCBOs, fused switches, and kWh meters for domestic and commercial installations.
FuseBox is a renowned manufacturer of functional, trade-focused electrical protection and distribution equipment. Designed with the installer in mind, FuseBox produces a wide range of devices, including consumer units, MINI RCBOs, three-phase kWh meters, bell transformers, and fused switches.
Their products are built to comply with stringent safety standards such as BS EN 61439-3 and IEC 61009-1, prioritizing both rigorous performance and ease of installation for qualified electricians. Outfitted with compact form factors, clear labeling, and switched line/neutral configurations, FuseBox components yield reliable overload, short circuit, and earth leakage protection in modern electrical systems.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Reset the tripped RCBO to the ON position. If it trips again, disconnect all appliances connected to the circuit. Switch the RCBO back ON and reconnect one appliance at a time to identify the faulty item. Do not use the faulty appliance until it has been professionally checked.
All FuseBox consumer units, RCBOs, and related modular devices must be installed by a qualified electrician in accordance with the current IET Wiring Regulations (BS 7671).
Loose connections can cause electrical fires. Before powering up the circuit, ensure that all connections, including factory-made connections, are tightened to the torque settings specified in the product manual.