FROG specializes in innovative mineral sanitizing systems and water care solutions for swimming pools and hot tubs, reducing the need for traditional chlorine.
FROG, a brand developed by King Technology, provides industry-leading mineral water care systems that keep swimming pools and hot tubs clean, clear, and soft. By utilizing a patented combination of minerals and low levels of chlorine or bromine, FROG products significantly reduce chemical usage and practically eliminate the harsh effects of traditional water care. Known for highly efficient systems like the FROG @ease, Flippin' FROG, and Pool FROG Cycler, the brand offers prefilled replacement cartridges designed to take the guesswork out of pool and spa maintenance.
Whether you need an inline sanitizing system for a residential hot tub or a robust mineral reservoir cycler for a 40,000-gallon pool, FROG water care solutions prioritize convenience and safety. Their exclusive SmartChlor technology automatically self-regulates to maintain optimal sanitizer levels without constant micromanagement. Below you will find comprehensive FROG user manuals and setup guides to properly install your sanitizers, troubleshoot water chemistry, and maximize the efficiency of your cartridges.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
If you were previously using bromine, you must drain and refill your hot tub before using FROG @ease. If you were using dichlor, you can convert to the FROG @ease System without draining as long as the cyanuric acid level is below 80 ppm.
The FROG Mineral Cartridge needs to be replaced every four months, or whenever you drain and refill your hot tub. You must discard it after 4 months even if you can still hear spent media inside.
Conventional test strips inaccurately measure the self-regulating SmartChlor reserve as total chlorine. You must use the specific FROG @ease Test Strips included with your system to properly check your levels.
Remove the FROG system from the pool or spa until the chlorine level drops to 1.0 ppm. Lower the dial setting on the cartridge by one number, place it back into the water, and re-test in 24 hours.