Flipper represents two distinct popular product lines: the Flipper Zero multi-tool for electronics exploration, and Flipper Big Button Universal Remotes for seniors.
The FLIPPER brand encompasses two prominent but distinct consumer categories.
The first is Flipper Devices Inc., renowned for the highly popular Flipper Zero, a portable multi-tool device designed for geeks, hardware hackers, and pen-testers to explore access control systems, radio protocols, RFID, and NFC.
The second is the Flipper Remote, a line of simplified, big-button universal TV and cable remotes specifically designed for seniors, the elderly, and individuals with low vision or cognitive challenges like Dementia or Alzheimer's.
Whether you are looking for user guides on modifying the Flipper Zero with ESP32 development boards, or instructions on programming favorite channels on your Flipper Big Button TV Remote, you can find the comprehensive manuals, troubleshooting tips, and setup guides here.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Connect your device to your computer via USB cable and go to https://update.flipperzero.one to install the latest firmware available.
Press and hold the ADD button until the light turns solid, then enter 954. The light will blink out, indicating the reset is complete.
Hold the Left and Back buttons simultaneously to reboot the device. If it doesn't power on, try charging the battery with a 5V/1A USB power supply.
Press and hold the STB and ADD buttons at the same time until the light turns solid. Enter your channels using the format: Channel-LC-ADD or Channel-ADD (e.g., 7-ADD or 7-LC-ADD). Press and release the STB button to exit.
The Flipper Zero supports microSD cards up to 256GB, but 16GB is generally sufficient. It must be formatted as exFAT or FAT32.