Flipper Big Button Universal TV Remote Instruction Manual

1. Product Overview

The Flipper Big Button Universal TV Remote is designed to simplify television and cable box control for users who benefit from larger, more tactile buttons, such as seniors or individuals with impaired vision. This remote consolidates essential functions into a user-friendly interface, reducing complexity.

Figure 1.1: Front view of the Flipper Big Button Universal TV Remote, showing the large, color-coded buttons for power, volume, channel, and mute.

2. Key Features

• Simplified Interface: Features large, color-coded, tactile buttons for primary functions: On/Off, Channel Up/Down, Volume Up/Down, and Mute.
• Dual Device Control: Capable of controlling one TV only, or a TV and a Cable Set Top Box (STB) media center. Also compatible with some soundbars.
• Wide Compatibility: Works with various IR infrared devices including TVs (e.g., Samsung, LG, Vizio, Toshiba, TCL, Panasonic, Insignia) and cable boxes (e.g., Xfinity, Spectrum, DirecTV, Dish, ATT, Verizon).
• Favorites Programming: Allows users to program up to 25 favorite channels for easy access, eliminating the need to scroll through unwanted channels.
• Accidental Reprogramming Prevention: Incorporates special software to prevent unintended reprogramming.
• Hidden Keypad: A sliding cover conceals a numeric keypad and advanced programming buttons, maintaining a simple appearance for daily use.

Figure 2.1: Image illustrating the simple functionality of the Flipper remote, highlighting its ease of use.

Figure 2.2: A senior individual comfortably using the Flipper remote, demonstrating increased independence through simplified control.

3. Package Contents

• 1 x Flipper Big Button Universal TV Remote
• 1 x Instruction Manual (this document)

Note: 2 AA batteries are required for operation and are not included in the package.

4. Setup Instructions

4.1. Battery Installation

1. Slide open the battery compartment cover located on the back of the remote.
2. Insert two (2) AA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover securely.

4.2. Programming the Remote

The Flipper remote can be programmed for your TV, Cable Box (STB), or both. The remote uses infrared (IR) signals and requires a direct line of sight to the devices.

Figure 4.1: The Flipper remote with its sliding cover open, revealing the numeric keypad and advanced programming buttons.

4.2.1. Initial Test Presets

The Flipper remote may have pre-programmed codes for common TVs and STBs. Test these by pressing the VOLUME and CHANNEL buttons. If your devices respond, no further programming may be needed for basic functions.

4.2.2. Syncing Your TV

1. Locate the TV code list provided with your remote (or refer to the manufacturer's website).
2. Slide down the cover to reveal the numeric keypad.
3. Press and hold the TV button until the indicator light on the remote turns solid.
4. Enter the 3-digit code for your TV brand using the numeric keypad.
5. The indicator light will turn off if the code is accepted. Test the VOLUME buttons. If they do not work, repeat the process with the next code for your TV brand.
6. Special Case: If you are only using the remote for a TV and no STB, and no codes work, try holding the TV button until the light turns solid, then enter 970. This attempts to sync the remote to the TV for all functions.

4.2.3. Syncing Your Cable Box (STB)

1. Locate the STB code list provided with your remote.
2. Slide down the cover to reveal the numeric keypad.
3. Press and hold the STB button until the indicator light on the remote turns solid.
4. Enter the 3-digit code for your STB brand using the numeric keypad.
5. The indicator light will turn off if the code is accepted. Test the CHANNEL buttons. If they do not work, repeat the process with the next code for your STB brand.
6. Note for Xfinity users: Some Xfinity boxes may be located behind the TV or furniture, which can obstruct the IR signal. An IR extender may be necessary for reliable operation.

Figure 4.2: Diagram illustrating the easy setup process with advanced controls, including steps for testing presets and syncing TV/STB.

4.3. Programming Favorite Channels

You can program up to 25 favorite channels for quick access.

1. Ensure the remote is in STB mode (if controlling a cable box) or TV mode (if controlling TV channels directly).
2. Slide down the cover to reveal the numeric keypad.
3. Press and hold the ADD button until the indicator light turns solid.
4. Enter the channel number you wish to add as a favorite using the numeric keypad.
5. Press the ADD button again to save the channel. The indicator light will flash and turn off.
6. Repeat for all desired favorite channels.
7. To delete a favorite channel, press and hold the DEL button until the indicator light turns solid, then enter the channel number and press DEL again.

5. Operating Instructions

Once programmed, the Flipper remote offers straightforward operation.

5.1. Basic Functions

• ON/OFF: Press the green ON/OFF button to power your TV and/or STB on or off.
• VOLUME +/-: Press the orange VOLUME + or VOLUME - buttons to adjust the sound level.
• CHANNEL ^/v: Press the blue CHANNEL ^ or CHANNEL v buttons to change channels.
• MUTE: Press the grey MUTE button to silence the audio. Press again to restore audio.

5.2. Using Favorite Channels

After programming favorite channels, you can cycle through them using the CHANNEL buttons. The remote will only navigate between your saved favorites, bypassing all other channels.

Figure 5.1: The Flipper remote with its cover slid down, illustrating how to access the numeric keypad for advanced functions like programming favorite channels.

6. Maintenance

6.1. Battery Replacement

Replace batteries when the remote's indicator light becomes dim or unresponsive. Follow the battery installation steps in Section 4.1.

6.2. Cleaning

Wipe the remote with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.

7. Troubleshooting

• Remote not responding:
  • Ensure fresh AA batteries are correctly installed.
  • Verify direct line of sight between the remote and the device (TV/STB). Obstructions can block IR signals.
  • Re-attempt programming the remote using the correct codes for your devices.
• Remote controls TV but not Cable Box (or vice versa):
  • Ensure both TV and STB are programmed correctly. Refer to Section 4.2.
  • Confirm the remote is in the correct mode (TV or STB) if applicable, though the Flipper is designed to manage both seamlessly after setup.
• Remote does not work with streaming devices:
  • The Flipper remote is designed for IR infrared TVs and cable/STB media centers. It does not have navigation buttons and is not compatible with streaming set-top boxes (e.g., Roku, Apple TV, Google TV, Fios TV+), HDMI dongles (e.g., Fire TV, DirecTV Gemini), or streaming applications (e.g., Netflix, YouTube, Prime, Hulu).
• Xfinity box not responding:
  • Xfinity boxes often require a direct line of sight. If the box is hidden, an IR extender may be necessary.

Figure 7.1: An informational graphic detailing the streaming compatibility of the Flipper remote, explicitly stating which streaming services and devices are not supported.

Figure 7.2: A visual representation of the wide compatibility of the Flipper remote with various TV and cable box brands.

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official Flipper website or contact Flipper customer service directly. Contact details are typically provided on the product packaging or the manufacturer's official online resources.