Event Lighting offers stage lighting fixtures, including LED parcans and moving heads, for controlled colour, beam and visual effects at performances and events.
Event Lighting provides stage lighting equipment, including LED parcans and spot moving heads. Browse manuals for installation guidance, control menus, DMX channel charts and technical specifications.
Match your fixture’s model number before following setup instructions, as operating modes and safety requirements vary. For warranty or technical assistance, consult your local dealer or Event Lighting.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the model number on your fixture to the manual, such as LM75 or PAR12X12L. Check the manual version before using its settings or specifications.
Select the 11- or 13-channel mode and set the starting DMX address through the fixture menu. Use the matching channel chart in the LM75 manual and assign non-overlapping addresses for independent control.
The PAR12X12L prioritizes an incoming DMX signal. Its manual specifies DMX mode without an active DMX connection for infrared remote operation.
The provided manuals direct users to their local dealer or Event Lighting. Stop using a fixture if a serious operating problem occurs, and seek qualified assistance rather than opening it yourself.
Read the exact model’s mounting instructions, use the specified mounting hardware and a safety chain or cable, and have qualified personnel perform the installation.