Ainostone offers Bluetooth audio transmitters and receivers that connect TVs, computers and home stereos with wireless headphones, speakers and other audio devices.
Ainostone offers Bluetooth audio transmitters and receivers for TVs, computers and home stereo systems. Depending on the model, adapters support AUX, optical or RCA connections and wired bypass operation.
Browse manuals for setup, Bluetooth pairing, mode selection and troubleshooting. Match the model number on your device to the guide before following its instructions.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Check the model number on your adapter or packaging and match it to the manual title. Controls and connections may differ between models.
Connect the audio source to the BT17 TX input, supply 5V power and select TX mode. Put your headphones in pairing mode, then use the BT17 display and MFB knob to select and confirm the headphones.
Connect your speakers to the RX output, supply power and select RX mode. Enable Bluetooth on your phone, tablet or computer and select BT17 to pair.
Check that the TV audio format is set to PCM and its output is set to external speakers. The BT17 does not support Dolby or DTS over optical. Remove any cable from the AUX output if using optical output, as AUX has priority.
No official warranty or registration page has been verified. Check the documentation supplied with your product or contact the seller through your order details for assistance.