CAIROCK-LOGO

CAIROCK Ceiling Fans with Lights Remote and App Control

CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-PRODUCT

Installation instructions

Accessories  diagram
small hanging cup 2big hanging cup 3light @blades (5 pieces) Slight cover Glong hanging lever short hanging lever 8hanging bracket 9motor lamp tray I controller remote control 13 wire cap 14self-tapping screw 15 expansion screws

CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-01

Assemble the blades

Remove the 10 marked screws from the motor (9) to prepare for assemble the blades CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-02

Assemble the blades (4) with the 10 screws to the motor (9) CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-03

Assemble the blades with the 10 screws like this CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-04

Assemble the lamp tray (10)

Firstly remove the marked 3 screws from the motor CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-05

Secondly, prepare these parts CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-06

Assemble the lamp try 10) to the motor (9) with the 3 screws that just removed in last step. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-07

Connect the wires from the light (3) to the wires on the bottom of the motor (9). CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-08

Assemble the hanging parts

the small hanging cup(O), the big honing cup (2), a hanging lever (either 6 or 0 as per your requirements) CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-09

Firstly, remove the needle at the bottom of the lever; Secondly, thread the 2 hanging cups (• & 2) into the lever from the bottom of lever to the top like the picture shows. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-010

Make the wire on the motor go across the lever like the picture shows CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-011

Insert the lever into the motor, then insert the needle/pin, and secured with the screws CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-012

Assemble the light cover (5)

Align the light cover (5) and put it on, gentlely rotate the cover and tighten it securely with the lamp tray (10) CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-013

Assemble the hanging bracket (8)

on your ceiling or roof with the Expansion Screws (15). CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-014

between leach hole shing matizehe hanstance bracket. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-015

Hammer the 4 expansion screws into the holes you just drilled. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-016

Assemble and tighten the hanging bracket. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-017

Put the ceiling fan which well assembled on the hanging bracket, gentely rotate the lever to make it perfect fixed on the bracket. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-018

Connect the wires on the controller (1) with the ceiling fan and your L & N line. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-019

Put the controller on the bracket after all wires well connected CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-020

Sort the wires and push the big hanging cup to the top to cover all the wires and parts. Gently rotate and tighten the cup and lever. CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-021

Fix and tighten the screws outside the big hanging cup 2 to avoid it wobbling.

CAIROCK-Ceiling-Fans-with-Lights-Remote-an-App-Control-022

Documents / Resources

CAIROCK Ceiling Fans with Lights Remote and App Control [pdf] User Guide
Ceiling Fans with Lights Remote and App Control, Ceiling, Fans with Lights Remote and App Control, Remote and App Control, App Control

References

Leave a comment

Your email address will not be published. Required fields are marked *