BrainChild XH12 Data Logger
XH Series Data Logger
- Set Logging of statistical data of temperature & humidity
- Wireless configuration, monitoring; set parameter & download report via Wi-Fi
- M.K.T. Mean Kinetic Temperature calculation
- USB/ Battery power supply
XHLogger Quick Start
Copyright © 2024 BrainChild Electronic Co., Ltd. All rights reserved.
Package
- Data Logger x 1
- XH12 Battery Installed (3.7V/ 1500mA Li-ion)
- (Rechargeable Li Battery)
- Mounting Plate/ Fixed Sticker x 1
- Screws/ Anchors x 2
- Quick User Guide x 1
- External Sensor Probe x 1
Mounting Plate
Back/ Front Plate
Bracket + XHLogger Place the XHLogger into the mounting bracket
LED
- Flashing Red/ Green LED, indicating devices startup successfully
- Flashing Green LED, indicating working in recording monitoring mode
- Flashing Red LED, indicating errors occurred, alarms triggered
- Red LED blinking 3 times & off continuously, when the connection is interrupted
LCD Display
The symbol 
indicates unit recording. Recording will start only when the timer matching settings. Flashing indicates delayed reocrding, pending for scheduled tasks.
The symbol will disappear after logging completed.- Battery capacity displayed in proportion
- Remaining memory capacity displayed in proportion
- The wrench indicates
errors occurred, disappears when confirms no error occurred. - Real-time temperature or humidity info.
- ALM bar: When temperature/humidity reaching the alarm condition,
(Low Limit) - Temperature Unit °C/ °F
- ALM: When temperature/humidity value reaching the alarm trigging condition
- Max. temperature/humidity Value
- Min. temperature/humidity Value
- MKT: Mean Kinetic Temperature Caculation
- File: Total number of files
- HL: High Limit
- MH: month/ hour
- Log: Log interval
- %H: Relative Humidity %
- LL: Low Limit
- DLY: Delay Time
- DM: date/ minute
Please refer to User Manual, Configuration & Data Analysis, for more information
3-Key Operation
Operation Mode
Data Configuration/ Analysis
Download DLV, the Data Logger Viewer software, from the manufacturer’s website. The PC Software can be used for configuration of the data logger, viewing and analysing of historical data.
NOTE: *Recording has been locked by default factory settings, please reset time zone firstly & time interval.
Wi-Fi Pairing
Quick and easy wireless pairing
- Take one XH12 which is new to the system
(If this XH device used before, already paired wireless before, press the third button, STOP 
key, more than 3 secs for 5 times, thus clear the previous Wi-Fi setting) - Open the DLV software on your PC via micro USB port. Go to <Sensors> on the top menu.
- Press and hold sync the 2&3 keys,
for 3 secs. rEG registration steps will appear. - Wi-Fi setting screen appeared on DLV, follow the sequence steps to complete wireless pairing.
- Press <Finish> after pairing successfully. Go to <Sensors> list-page, the connected Wi-Fi already discovered on the page.
Sensor > New > SSID/PWD > Next > rEG > Finish
DLV Quick Activation
- Step 1: Connect the XHLogger to PC, micro-USB plug of the USB cable into the PC USB port.
*Use only USB data file transfer cables to collect data for analysis - Step 2: The Sensor list will renew newly discoveried devices, click <View> of new items
- Step 3: Go to <Parameter> set your local time zone
- Step 4: Set <Log Interval>, the number must not be zero
- Step 5: Press <Save> after all settings applied
Error Code
An error symbol will appear when any error occurred
If you have any other tech problems, please contact us and provide the serial number on the sticker from the back of the device.
Battery Charge
* The XH12 uses a rechargeable battery; when receiving the brand new product, before usage for the first time, please charge the new device to full level via USB port. Use one microUSB-USB cable, connecting USB port to power supply DC5V/1A. When the device completely no power, less than 20%, the totally charging time to fully charged takes around 4 hr to finish with connecting to DC5V/1A charging adapter. For normal usage, recharge the device every 2 to 3 months.
Tech Support:
service@brainchild.com.tw
XH12 QSG ENv1.0, 2024-05-23
XH12
Frequently Asked Tech Support Questions
After successfully paring DLV with XH12, do I need to keep DLV software open to stay connection
For normal usage, the XH12 will keep connection with DLV, also sending data back to DLV continuously. When the XH12 cannot find DLV, it will try to search DLV and the LED screen will display Er04, which will make battery draining fast. Even power saving mechanisms exist, it is recommended to keep the connection between DLV and XH12 all the time
During pairing processing, cannot find any XH12 device on the list?
Press the STOP button 5 times, and wait until “rSt” displayed on LED to clear paring setting on this device. Manually operate the pairing procedure again. Enter and make sure paring networking SSID and password correct. Before pairing again, check Wi-Fi and networking environment, whether the signal too weak on the location. Also avoid turning phone hotspot to replacing Wi-Fi, which cause networking connection unstable. Please note that it is required to run program under windows 10 OS or above.
Will the connection between DLV and XH12 failed after when the DHCP assigns a new IP address
Under normal network circumstances, DLV and XH12 use the same domain for connection. When IP address on the computer changed, DLV will still search and update the link automatically.
When the error code, Er05, is shown on XH12 LED
Er05 occurs when XH12 cannot connect to the paired Wi-Fi, so please check the network device firstly and then restart the DLV software and confirm that IP domain of DLV is the same as setting before.
How to reconnect the device with DLV software again
The device has been paired successfully before, yet if the device unexpected disconnection problems occur, the user can try to pair again to establish the connection between XH12 and DLV. Press the STOP button 5 times, and wait until “rSt” displayed on LED to clear paring setting on this device. Manually operate the pairing procedure again.
The DLV is activated and finished pairing but my XH12 cannot work properly
The first step to activate DLV is to click on the device name; go to Parameter firstly to reset Log Interval Time Zone. Set Log Interval not zero H M S and set current Time Zone. Save and Exit
How to change the DLV language interface
To change the DLV language, click on the device name and go to Settings on the top menu. On the General tab, change Language field and Exit the program. Launch the DLV again, the new language interface will start.
Documents / Resources
 |
BrainChild XH12 Data Logger [pdf] User Guide XH12, XH12 Data Logger, Data Logger, Logger |
References
