Headphone Overview

Headphone Overview

Operational Instruction:

Power On:
when headphone is off. Press MF button until you hear “Power on·.

Power off:
When the headphone is on. press MF and hold MF button until you hear power off’.

Pairing mode:
When the headset Is off, press and hold the MF button until you see LED blue light stays on, then release, It Is in the pairing mode.

Bluetooth Pairing:
Make sure the headphone enter pairing mode( see instruction ‘Pairing mode) and tum on Bluetooth function of your phone, select:”T Monitor” .

Music control:
When playing music, press the MF button once to Pause/Play.
Press once to reduce the volume – ; press and hold to skip to the previous track.
Press once to increase the volume + ; press and hold to skip to the next track.

Answer/ Reject a call:
Receiving an incoming call,press the MF button once to Answer/End; Press and hold it for 2 seconds to refuse.

Redial tho last call:
Press MF button twice to redial the last number.

Language select.ion:
When headphone is on, press MF button and Volume button once simultaneously, and it will beep counterpart voice to select Chinese/English/French/Spanish.

EQ mode:
Press the volume”+” and volume”- ” buttons simultaneously to switch the EQ mode.

Charging the headphone:
Switch off the headset before charging, and use standard charging cable to connect the headphone or wall charger, when it Is charging, LED light remains red.
Allow 2 hours for full charging, once fully charged, LED blue light stays on.

Llne-in music playback:
Connect Iha headset with your mobiles phone and computers via 3.5mm Type-C audio cable to play music.
Note: Please turn off the headphone before using this !Unction. (audio cable Is not provided, ff you need It, please order one from Bluedio official purchase channel.)

Line-out music playback:
Connect headphone 1 with phone via Bluetooth, then connect headphone 1 with the headphone 2 with 3.5 mm Type-C audio cable to play music.
Note: headphone 2 should support 3 .5 mm audio connection.
(audio cable is not provided, If you need It, please order one from Blued lo official purchase channel.)

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Loam more and get support
Welcome to visit our official website: www.bluedio.com;
Or to email us at aftersales@bluedio.com;
Or to call us al 400-8119-0123.

Cloud function:
The headphones support Cloud service. Users can download the APP by scanning the QR code on the last page.

Wake up the cloud( installed the Cloud APP on your phone)
Connect the headset wit, your phone, then double-click the MF button to wake up the Cloud. Cloud service is on, you can enjoy smart Cloud service.

Bluetooth version: Bluetooth~.o
Transmission f frequency: 2.4GHz-2.48GHz
Bluetooth range: up to 10 m (free space)
Bluetooth Proflles:A2DP, AVRCP, HSP, HFP
Frequency response: 20Hz-20KHz
Audio Resolution: up to 24bit@48KHz
Driver units: 57mmx2
lmpendence : 1 Sn
Tot all Harmonic Distortion(THD): 0.3%-3%
Sound pressure level(SPL):1 t 8dB
Standby time: about 1000 hours
Bluetooth music/talk t ime: about 30 hours
Charging time: about 2 hours for f ull charge
Operating temperature range: -10-C to 50-C only
Charging voltage/current: 5V/> 400mA
Power Consumption: 30mW-t30mW

Common Issue and solution:

Common Issue and solution

Questions about your Manual ? Post in the comments!

Join the Conversation


  1. They keep saying battery low even after charging all night. Its so annoying that it doesn’t pause anything but it stops all audio just to scream battery low . Its getting to the point where I dont even want to use them.

  2. What if I have an earlier version of the headphones?

    Что делать если у меня более ранняя версия наушников?

  3. How can you turn off the automatic voice? Keeps saying Minimum Volume and Power On/Power Off. How to turn this off?

    1. The bluetooth pairing pin for the Bluedio TM is likely one of the default codes, try 0000, 1234, 1111, or 000000.

Leave a comment

Your email address will not be published. Required fields are marked *