USER MANUAL

Bluedio Ti

Bluedio Earphones
Model: Ti

Welcome to your new Bluedio Earphones
We appreciate your choice of Bluedlo earphones. Before use, please read this user manual carefully and keep for future reference.

Purchase Verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedlo.com; Or to email us at [email protected]; Or to call us at 020-86062626-835.

Important Safety Information

  • DON’T use the earphonee at a high volume for any extend8CI period to prevent hearing damage.
  • DON’T use the earphones while driving or in any environment requiring your full allentlon. If necessary, use Bluedio communication headphones.
  • Keep the earphones, accessories and packaging parts out of re11eh of children to prevent aceidenls and choking hazards.
  • Always keep the earphones dry and DON’T use the earphones near water.
  • STOP u11ing the earphones immediately if you feel sick wtille using the earphones.
  • DON’T expose the earphones to either extremely high or low temperatures (ideal: 10’C to 35°C).
  • Ramoval of th11 chargeable battery in the earphones shall be conducted only bye qualified professional.
  • DON’T try to replace the battery on your own.

Earphones overview

Earphones overview

In The Box

  • Ti earphones
  • USB charging cable
  • Eartips (S, M, L)
  • Ear hocks (S, M, L)
  • Pouch
  • User Manual

Note: Medium lips and hooks are attached to the earbuds.

MF button

  • Turn on: press and hold the MF button untll you sea the blue light flashes quickly.
  • Turn off: press and hold the MF button until you see the blue light flashes & quickly then goes out
  • Pairing: when the earphones are off, press and hold the MF button until you see the blue light stays on.
  • When playing music in Bluetooth mode, press the MF button once to Pause/Play.
  • Receiving an incoming call, press the MF button once to Answer/End; Press and hold for 2 seconds to refuse.
  • Receiving call 2 while in call 1, press and hold the MF button to hold on call 1 and answer call 2; press and hold again to switch back to call 1 and hold on call 2; press once to end.
  • Press the MF button twice to redial the last number .
MF button

Bluetooth pairing
Make the earphone & enter pairing mode (see Instruction “MF butlon”) and turn on the Bluetooth feature of your phone, select “Ti” (enter ·oooo· if necessary).
After successfully paired, you will see the blue light blinks. Next time just turn on the earphones and the Bluetooth feature of your phone, It will automatically connect to your phone.
Nate: If pairing is not successful within 2 minutes, please repeat above steps to pair again.

Volume -/previous track
Press once to reduce the volume; press and hold to skip to the previous track.

Nate: If pairing is not successful within 2 minutes, please repeat above steps to pair again.

Volume -/previous track

Volume+/next track:
Press Once to increase the volume; press and hold to skip to the next track.

Volume+/next track

EQ adjustment
When the earphones are playing music, press the Volume+ button and Volume- button together once to change Ea.

EQ adjustment

Language Selection
Turn on the earphones first, then press the MF button and Volume- button together once, it will emit related prompt tone. There are 4 language available. including Chinese, English, French and Spanish.

Language Selection

Mute button
During a phone call, press and hold the Volume button to mute the mic; press and hold the Volume+ button to cancel the mute .

Connect the Earphone with two mobile phone Via Bluetooth:
Connect “Ti” with phone 1, then turn off “Ti” and the Bluetooth feature of phone 1;
Turn on “Ti” end make it enter pairing mode;
Connect “Ti” with phone 2;
Turn on the Bluetooth feature of phone 1, search and select “Ti” to connect.

Charger and battery;
Charging cable: please use the included use charging cable to charge the battery, or it may damage the earphones.
USB wall Charger: if using a USB wall charger, the output requires 5VDC, >0.1A.

Charge the Earphone:
The built-in battery is rechargeable and non-detachable.
Don’t try lo replace the battery on your own.

  • Turn off the earphones before charging.
  • Use tt,e included USB charging;cable to connect the earphone with a computer or wall charger. While charging, the blue light stays on.
  • Allow 2 hours for a full charge. Once fully charged, the blue light will go out.
Charge the Earphone

Specifications

Bluetoolh version: 4. 1
Drivers: 13mm moving-coil units•2; mo111ng-1ron unlts*2
Transducer principle: dynamic; moving-iron
Bluatooth operating rang11: up to 33 feet (free space)
Bluetooth profiles: A2DP, AVRCP, HSP, HFP
Impedance: 32□ (moving-coil); 130 (moving-iron)
Frequency response: 20Hz-20,000Hz
SPL: 110dB
THO: 1%-3%
Bluetoolh music/talk lime: aboul5 hours
Standby time: about 160 hours
Charging time: about 2 hours
Operating temperature: -10’Cto 50″C
Input voltage/current: 5V/> 0.1A.
Output power: 7mW + 7mW

Specifications are subject to change without notice .

Questions about your Manual ? Post in the comments!

Leave a comment

Your email address will not be published. Required fields are marked *