BLAUPUNKT Bluebot App on Google Play Installation
- Place the robot in the charging station to charge and make sure it’s fully charged before use.
- Remove the robot from the charging station.
- Make sure the Robot is on, by holding in the ‘On button’ for a few seconds on top of the robot. Wait until the robot has started fully.
- Download the Bleubot app. The app can be found in the Appstore and Google Play.
- Register a new account if you are not yet an existing user.
- Open the Bluebot app and press the ‘+ icon’ to add your device.
- Select the device you want to add.
- Select your wifi network enter the password and confirm
- Select ‘AP mode’ in the upper right.
- After your registration, make sure the robot is removed from it’s charging station. Turn on your Robot by pressing the ‘On button’ . After that is done, press both the ‘Home button’ and ‘On button’ simultaneously for more than 3 seconds connection.
- Press on the ‘Go to connect’ button in the bottom of your screen.
- Select the ‘SmartLife xxx’ network from the list and return to the Bluebot app. Your robot will now connect to the App.
Documents / Resources
 |
BLAUPUNKT Bluebot App on Google Play [pdf] Installation Guide Bluebot App on Google Play |
