BITMAIN S19j XP High Performance Miner
Product Information
Specifications
- Model: S19j XP
- Version: K115-210
- Crypto algorithm/coins: SHA256 | BTC/BCH
- Typical hashrate, TH/s: 151/136/130
- Power on wall @25°C, Watt: 3247/2924/2795
- Power efficiency on wall @25°C, J/TH: 21.5
Detailed Characteristics
- Power supply:
- Phase: 3
- Input voltage, Volt: 220~277
- Input frequency range, Hz: 50~60
- Maximum input current, Amp: 20
- Hardware Configuration:
- Network connection mode: RJ45 Ethernet 10/100M
- Server size (Length*Width*Height, w/o package),mm: 400*195*290
- Server size (Length*Width*Height, with package),mm: 570*316*430
- Net weight, kg: 14.9
- Gross weight, kg: 16.6
- Noise @25°C, dBA: 76
- Environment Requirements:
- Operation temperature: 0~40°C
- Storage temperature: -20~57°C
- Operation humidity, RH: 10%~90%
- Operation altitude, m: 2000
Performance Curve
- Hashrate vs. Ambient temperature
- J/T vs. Ambient temperature
Product Usage Instructions
- Connect the power supply to the specified phase and input voltage.
- Ensure network connection is established using RJ45 Ethernet.
- Place the server in a suitable environment within the specified temperature and humidity ranges.
- Monitor the noise levels and ensure they are within acceptable limits.
FAQ
Q: What should I do if the hashrate drops significantly?
A: Check for any hardware issues, ensure proper ventilation, and monitor the temperature.
Q: How often should I clean the server for optimal performance?
A: It is recommended to clean the server periodically, at least every few months, to prevent dust buildup.
BITMAIN TECHNOLOGIES INC.
www.bitmain.com
Specification
| Product Glance | Value |
| Model | S19j XP |
| Version | K1-20 |
| Crypto algorithm/coins | SHA256 | BTC/BCH |
| Typical hashrate, TH/s(1-1) | 151/136/130 |
| Power on wall @25℃(1-2), Watt(1-1) | 3247/2924/2795 |
| Power efficiency on wall@25℃(1-2), J/TH(1-1) | 21.5 |
| Detailed Characteristics | Value |
| Power supply | |
| Phase | 3 |
| Input voltage(2-1), Volt | 220~277 |
| Input frequency range, Hz | 50~60 |
| Maximum input current, Amp | 20 |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Server size (Length*Width*Height, w/o package), mm | 400*195*290 |
| Server size (Length*Width*Height, with package), mm | 570*316*430 |
| Net weight, kg | 14.9 |
| Gross weight, kg | 16.6 |
| Noise (2-2) @25℃, dBA | 76 |
| Environment Requirements | |
| Operation temperature, ℃ | 0~40 |
| Storage temperature, ℃ | -20~70 |
| Operation humidity, RH | 10%~90% |
| Operation altitude(2-3)，m | ≤2000 |
Notes:
- The Hashrate value, Power on wall, and Power efficiency on wall are all typical values, The actual Hashrate value fluctuates by ±3%, and the actual Power on wall and Power efficiency on wall fluctuate by ±5%.
- Inlet air temperature.
- Caution: Wrong input voltage may probably cause server damaged.
- Max condition: Fan is under max RPM(rotation per minute).
- When the server is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m.
Perfermance Curve
Hashrate vs. Ambient temperature
J/T vs. Ambient temperature
Documents / Resources
 |
BITMAIN S19j XP High Performance Miner [pdf] Instruction Manual S19j XP K115-210, S19j XP High Performance Miner, S19j XP, High Performance Miner, Performance Miner, Miner |
