BITMAIN ANTMINER S21 XP Hyd Profitability Asic Miner
Specifications
Product Glance
| Value | Model | Sub | Version | Crypto algorithm/coins | Typical hashrate, TH/s(1-1) | Power on wall @35(1-2), Watt(1-1) | Power efficiency on wall@35(1-2), J/T(1-1) |
|---|---|---|---|---|---|---|---|
| S21 XP Hyd. | 473T | 10 | SHA256|BTC/BCH/BSV | 473 | 5676 | 12.0 |
Detailed Characteristics
Power Supply
- Phase: 3
- Input voltage, Volt(2-1): 380~415
- Input frequency range, Hz: 50~60
- Input max current, Amp: 12
Hardware Configuration
- Network connection mode: RJ45 Ethernet 10/100M
- Server size (length*width*height, w/o package), mm: 339*173*207
- Server size (length*width*height, with package), mm: 570*316*430
- Net weight, kg: 13.8
- Gross weight, kg: 15.7
Environment Requirements
- Coolant flow, L/min: 8.0~10.0
- Coolant pressure, bar: 3.5
- Working coolant: Antifreeze/ Pure water/Deionized water
- Coolant pH value: Antifreeze: 7.0~9.0, Pure water: 6.5~7.5, Deionized water: 8.5~9.5
- Diameter of coolant pipe connector, mm: OD10
- Operation temperature: -20~70°C
- Operation humidity(non-condensing), RH: 10~90%
Performance Curves
- Hashrate vs. Inlet Coolant Temperature
- Power Efficiency vs. Inlet Coolant Temperature
Frequently Asked Questions (FAQ)
- Q: What is the typical hashrate of the S21 XP Hyd. miner?
A: The typical hashrate is 473 TH/s. - Q: What are the recommended operating environmental conditions for the S21 XP Hyd. miner?
A: The recommended operating temperature is -20~70°C and the humidity range is 10~90% RH. - Q: What type of coolant can be used with the S21 XP Hyd. miner?
A: Antifreeze, Pure water, or Deionized water can be used as coolants with specific pH value ranges.
S21 XP Hyd.
Product Manual
- BITMAIN TECHNOLOGIES INC.
- www.bitmain.com
Specification
| Product Glance | Value |
| Model | S21 XP Hyd. |
| Sub | 473T |
| Version | 10 |
| Crypto algorithm/coins | SHA256|BTC/BCH/BSV |
| Typical hashrate, TH/s(1-1) | 473 |
| Power on wall @35℃(1-2), Watt(1-1) | 5676 |
| Power efficiency on wall@35℃(1-2), J/T(1-1) | 12.0 |
| Detailed Characteristics | Value |
| Power Supply | |
| Phase | 3 |
| Input voltage, Volt(2-1) | 380~415 |
| Input frequency range, Hz | 50~60 |
| Input max current, Amp | 12 |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Server size (length*width*height, w/o package), mm | 339*173*207 |
| Server size (length*width*height, with package), mm | 570*316*430 |
| Net weight, kg | 13.8 |
| Gross weight, kg | 15.7 |
| Environment Requirements | |
| Inlet coolant temperature, °C | 20~50 |
| Coolant flow, L/min | 8.0~10.0 |
| Coolant pressure, bar | ≤3.5 |
| Working coolant(2-2) | Antifreeze/ Pure water/Deionized water |
| Coolant pH value | Antifreeze: 7.0~9.0 Prue water: 6.5~7.5 Deionized water：8.5~9.5 |
| Diameter of coolant pipe connector, mm | OD10 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
Performance Curves
- Hashrate vs. Inlet Coolant Temperature
- Power Efficiency vs. Inlet Coolant Temperature
- The hashrate value, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power efficiency on wall fluctuate by ±5%.
Documents / Resources
 |
BITMAIN ANTMINER S21 XP Hyd Profitability Asic Miner [pdf] Owner's Manual S21 XP Hyd., 473T, ANTMINER S21 XP Hyd Profitability Asic Miner, ANTMINER S21 XP Hyd, Profitability Asic Miner, Asic Miner, Miner |
