BaLDR - logoB0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors
User GuideBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors

MODEL: B0359WST4H4PR
WIRELESS COLOR WEATHER STATION WITH 3 REMOTE SENSORS

POWER ON

Main Unit InstallationBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 1

Step1, Peel off the protecting mask of the main unit.

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 2

Step 2, Plug the AC Adaptor to a powered outlet.

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 3

Step 3, Remove the built-in cell battery insulation strip.

Sensor Installation 

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 4

Step 1, Select the channel on each sensorBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 5

Step 2, Load the 2xAA batteries to each sensor within 3 minutes to ensure the RF signal is received in time.

NOTE:

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 6

If not powered on within 3 minutes from the main unit powered on.
Press and hold the “CH” button for 3 seconds to search the RF signal again.

MAIN UNIT SETUP

After Power On
LCD will fully display for 3
seconds with a “BI” sound.

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 7

After 3 seconds, the LCD will display the data belowBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 8

RF Signal Searching
The receiving antenna signal will flashBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 9

RF Signal Received
Automatically display, and the antenna signal will stop flashing.BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 10

RCC Radio Signal Receiving Automatically
RCC Radio Signal Searching for 7 MinutesBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 11

The antenna symbolBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - icon 1 is flashing.
The backlight brightness will go dim to 3% and no buttons except ▲/RCC will function.BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 12

Press & hold the ▲/RCC button will allow exiting the Atomic mode to continue manual setup.

No RCC Radio Signal Received

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 13

Press and hold “▲/RCC ” button for 3 seconds to search RCC radio signal againBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 14

Manual setup

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 15

  • Press and hold “SET” button to enter into setup (3 seconds).
  • Press and release “SET” button to skip setting or go to next setting option(1 second).

SETUP ORDER

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 16

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 17 BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - Figure 18

*Tips: press and hold “▲/RCC” or “ ▼ ” button will quickly change the value.
This Qucik Start is to help you quickly set up the product. For detailed settings, please refer to the user manual, or scan the QR code below for relevant product information and operation video link.Thank you.

BaLDR - logoBaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors - qrhttp://www.baldr.com/
www.baldr.com
Shenzhen Hailu Technology YS37 1 Wireless Controller - icon 4baldrservice@baldr.com
8x8 Work for Mobile App - icon 8:1-833-381-5659

 

Documents / Resources

BaLDR B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors [pdf] User Guide
B0359WST4H4PR Wireless Color Weather Station with 3 Remote Sensors, B0359WST4H4PR, Wireless Color Weather Station with 3 Remote Sensors

References

Leave a comment

Your email address will not be published. Required fields are marked *