ATT BL103 User Manual

BL103

Quick start guide
BL103-2/BL103-3/BL103-4
DECT 6.0 cordless telephone/ answering system with BLUETOOTH® wireless technology

Congratulations
on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 1-3 of this manual. Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service.
For customer service, please visit our website at https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Please refer to the online BL103-2/BL103-3/BL103-4 DECT 6.0 cordless telephone/answering system with BLUETOOTH® wireless technology Complete user’s manual for a full set of installation and operation
instructions at https://telephones.att.com/manuals.
Parts checklist
Your telephone package contains the following items.
Quick start guide BL103-2/BL103-3/BL103-4 DECT 6.0 cordless telephone/ answering system with BLUETOOTH® wireless technology

Quick start guide

Smart call blocker leaflet

Telephone base

Power adapter for telephone base

Cordless handset
(2 for BL103-2) (3 for BL103-3) (4 for BL103-4)

Charger for cordless handset with power adapter installed
(1 for BL103-2) (2 for BL103-3) (3 for BL103-4)

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles : BT162342/BT262342 (2.4V 300mAh Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine

GP1621

Battery for cordless handset
(2 for BL103-2) (3 for BL103-3) (4 for BL103-4)

Battery compartment cover
(2 for BL103-2) (3 for BL103-3) (4 for BL103-4)

Telephone line cord

Wall-mount bracket

Important safety information
This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.
Safety information f Read and understand all instructions in the user’s manual. Observe all markings on
the product. f Avoid using a telephone during a thunderstorm. There may be a slight chance of
electric shock from lightning. f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances,
a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. In an inadequately ventilated environment, the user should not plug the phone into a power outlet, nor put a charged handset into the cradle where there are concentrations of flammable or flamesupporting gases. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. f Do not use this product near water or when you are wet. For example, do not use it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquid, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. f Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. f If this product does not operate normally, see the Troubleshooting section of the online Complete user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section (pages 33 – 35). Do not open this product except as directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. f Replace batteries, only as described in your user’s manual (Page 5). Do not burn or puncture batteries — they contain caustic chemicals. f This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet. f For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
1

Important safety information
CAUTIONS: f Use only the power adapter provided with this product. To obtain a replacement,
visit our website at https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
f Use only the supplied rechargeable battery or replacement battery (model BT162342/ BT262342). To order, visit our website at
https://telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
i CAUTION: To prevent risk of fire or battery explosion, replace with the correct battery type. Dispose of used batteries according to the instructions.
Especially about cordless telephones f Privacy: The same features that make a cordless telephone convenient create
some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones. f Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. f Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. f Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.
2

Important safety information
The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickelmetal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. You may call 1-800-8-BATTERY® for locations accepting spent Ni-MH batteries. The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of Call2recycle, Inc.
Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients: f Should keep wireless telephones at least six inches from the pacemaker. f Should NOT place wireless telephones directly over the pacemaker, such as in a
breast pocket, when it is turned ON. f Should use the wireless telephone at the ear opposite the pacemaker. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.
ECO mode This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base.
Especially about telephone answering systems Two-way recording:This unit does not sound warning beeps to inform the other party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation.
SAVE THESE INSTRUCTIONS
3

Install
Telephone base
Notes: f Plug one end of the telephone line cord into a telephone jack or a DSL filter. f If you have DSL high-speed Internet service, a DSL filter (not included) is required. Charger
Caution: Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at
https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
4

Install
Battery Install the battery, as shown below.
THIS SIDE UP
Charge your handset(s) before initial use. The battery is fully charged after 11 hours of continuous charging. The CHARGE light on the top of the handset is on during charging.
Caution: Use only the supplied rechargeable battery or replacement battery (model BT162342/BT262342).
5

MaNdeEDiPnOAWCSNhAOBIiRNnTTNCaB1BII8/aNNU3FtGÉt3RaeR4bNr/2yErAi/ORqBVPuRETaOéc2TRPUk8eHTU3nP/IINS3BSEc4SClRh2oESTiCcn(MUI2-EDepRE.4REiENlVeLTUBs4E:A0P:S0TmP/TCIEALREhEISENC.Si-Ô.MTHÉ) VERS LE HAUT CR1535

MaNdEeDiPnOAWCSNAhBOIRiNnTTNBCa1BI8aIN/NU3tFGtÉ3Rea4RrbN/y2EAr/iOPBRVqaRTEuOTc2éRPkU8HTeU3/IInP3SSNBE4cSCl2oSRhETciC(IMnU2D-Epe.RE4EiRNlEVeUTLsB4EP:0:AS0T/mTPCEAILERhEISCNE.SiÔ-M.THÉ) VERS LE HAUT CR1535

Handset overview
1

2

3

9

10 4
11
5

6 12
7 13
8 14

Handset

1

CHARGE light Ì On when the handset is charging in the telephone base or charger.

2

VOL p DIR

Ì Press p DIR to show directory entries when the

handset is not in use.

Ì Press to scroll up while in menus.

Ì While entering names or numbers, press to move the

cursor to the right.

Ì Press to increase the listening volume when on a call,

or to increase the message playback volume.

VOL q CID

Ì Press q CID to show caller ID log when the handset is not in use.
Ì Press to scroll down while in menus. Ì While entering names or numbers, press to move the
cursor to the left. Ì Press to decrease the listening volume when on a call,
or to decrease the message playback volume.

3

CELL

Ì Press to make or answer a cell call. Ì During a cell call, press to answer an incoming cell call

when you hear a call waiting alert.

6

Handset overview

4

HOME/

FLASH

Ì Press to make or answer a home call. Ì During a call, press to answer an incoming home call
when you receive a call waiting alert.

5

1

Ì While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory.
Ì Press and hold to set or to dial your voicemail number.

6

* TONE

/a>A

Ì

Press to switch to tone dialing temporarily during a call if you have pulse service.

Ì While entering names, press to change the next letter

to upper or lower case.

7

/SPEAKER

Ì

Press to make or answer a home or cell call using the speakerphone.

Ì Press to switch between the speakerphone and the

handset.

8 MUTE/
DELETE/ VOICE

Ì During a call, press to mute the microphone. Ì When the handset is ringing, press to mute the ringer
temporarily. Ì While reviewing the caller ID log, the directory or the
redial memory, press to delete an individual entry. Ì While predialing, press to delete digits. Ì During message or announcement playback, press
to delete the playing message or the recorded announcement. Ì When the handset is not in use, press to activate the voice-controlled application of connected cell phone.

9 MENU/
SELECT

Ì When the handset is not in use, press to show the menu. Ì While in the menu, press to select an item or save an
entry or setting.

10

CALL BLOCK Ì Press to block the incoming call when the telephone is ringing.

Ì When on a call, press to block the call.

Ì When the handset is not in use, press to show the call

block menu.

11

OFF/

CANCEL

Ì During a call, press to hang up. Ì While in a menu, press to cancel an operation, back
up to the previous menu, or exit the menu display; or press and hold this button to exit to idle mode. Ì When the handset is ringing, press to mute the ringer temporarily. Ì Press and hold while the telephone is not in use to erase the missed call indicator.

7

Handset / Telephone base overview

12

QUIET#

Ì Press repeatedly to display other dialing options when

(pound key)

reviewing a caller ID log entry.

Ì Press and hold to enter the QUIET mode setting

screen, or to deactivate QUIET mode.

13 PTT (PUSH
TO TALK)

Ì Press to initiate a one-to-one or one-to-group broadcast.
Ì Press and hold to broadcast to a group of system devices.

14 REDIAL/
PAUSE

Ì Press repeatedly to view the last 10 numbers dialed. Ì While entering numbers, press and hold to insert a
dialing pause.

14 13

12

15

1 2

3 4

5

6

11 10 9 8 7

Telephone base

1

REDIAL/PAUSE Ì Press repeatedly to view the last 10 numbers dialed.

Ì While entering numbers, press and hold to insert a

dialing pause.

2

VOL

Ì Press to adjust the volume during message playback.
Ì Press to adjust the listening volume during a call. Ì When the phone is not in use, press to adjust the
telephone base ringer volume for all lines.

3

MUTE/VOICE Ì During a call, press to mute the microphone.

Ì While the telephone base is ringing, press to

silence the ringer temporarily.

Ì When the telephone is not in use, press to activate

the voice-controlled application of connected cell

phone.

8

Telephone base overview

4

1

Ì While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory.
Ì Press and hold to set or to dial your voicemail number.

* TONE /a>A

Ì Press to switch to tone dialing temporarily during a call if you have pulse service.
Ì While entering names, press to change the next letter to upper or lower case.

QUIET# (pound key)

Ì Press repeatedly to display other dialing options when reviewing a caller ID log entry.
Ì Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode.

5

/ANS ON

Ì Press to turn the answering system on or off.

6

/FIND HS

Ì Press the button to page all system handsets.

7

Antenna

8

X/DELETE

Ì Press to delete the message currently playing. Ì When the phone is not in use, press twice to
delete all previously reviewed messages. Ì While reviewing the redial list, directory, caller ID
log, allow list, block list, or star name list, press to delete an individual entry. Ì While entering names or numbers, press to delete a digit or a character. Ì While predialing, press to delete a digits.

/REPEAT

Ì Press to repeat a message or press twice to play the previous message.

/SKIP

Ì During message playback, press to skip to the next message.

/PLAY/ STOP

Ì Press to play messages. Ì Press to stop message playback.

9

INT

Ì Press to initiate an intercom conversation or transfer a call.

10

HOME (Speakerphone)

Ì Ì

Press to make or answer a home call. Flashes quickly when there is an incoming home call.

Ì Flashes slowly when a home call is on hold.

9

Telephone base overview

11

CELL

Ì Press to make or answer a cell call. Ì Flashes quickly when there is an incoming cell call.

Ì Flashes slowly when a cell call is on hold.

12

CALL BLOCK

Ì Press to block the incoming call when the telephone is ringing.

Ì When on a call, press to block the call.

Ì When the telephone base is not in use, press to

show the call block menu.

13

CELL 1 Light

Ì On when the telephone is paired and connected with a Bluetooth device.

Ì Flashes alternately while pairing a Bluetooth

device.

14

CELL 2/

Ì On when the telephone is paired and connected

Headset Light

with a Bluetooth device or headset.

Ì Flashes alternately while pairing a Bluetooth

device or headset.

15

CANCEL

Ì While in a menu, press to exit without making changes or press and hold to return to idle mode.
Ì Press and hold while the telephone is not in use to erase the missed call indicator.

qCID

Ì Press to scroll down while in a menu. Ì Press to review the caller ID log when the
telephone is not in use. Ì While entering names or numbers, press to move
the cursor to the left.

MENU/SELECT

Ì When the telephone base is not in use, press to show the menu.
Ì While in the menu, press to confirm or save an entry or setting.

pDIR

Ì Press to scroll up while in a menu. Ì Press to show directory entries when the
telephone is not in use. Ì While entering names or numbers, press to move
the cursor to the right.

PTT/FLASH

Ì Press to display the PTT menu to begin a PTT call. Ì Press and hold to begin a one-to-group broadcast
when the telephone base is not in use. Ì During a call, press to answer an incoming home
call when you receive a call waiting alert.

10

Initial basic settings
After you install your telephone or power returns following a power outage, the handset and telephone base will prompt you to set the date and time. To skip setting the date and time, press OFF/CANCEL on the handset or press CANCEL on the telephone base.
Voice guide to set Smart call blocker and answering system
After the date and time setting is done or skipped, the telephone base will prompt if you want to set Smart call blocker. Press MENU/SELECT to start the Smart call blocker setup via voice guide. To skip the setup, press CANCEL twice on the telephone base. After the Smart call blocker setting is done or skipped, the telephone base will then prompt if you want to set up the answering system. Press MENU/SELECT to start the answering system setup via voice guide. To skip the setup, press CANCEL on the telephone base.
We recommend you program your telephone system before use. The following are a few examples of common features to set before using the telephone. Refer to the Handset and telephone base settings and Answering system settings in the Complete user’s manual for detailed instructions on setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. MENU -> / -> Set date/time -> SELECT. 2. Enter the month (MM), day (DD) and year (YY) -> SELECT. 3. Enter the hour (HH) and minute (MM). 4. / -> AM or PM -> SELECT.
Smart call blocker setup via voice guide
You can follow the voice guide to set up Smart call blocker. Using the telephone base: 1. CALL BLOCK. 2. / -> Voice guide -> SELECT. 3. Press 1 if you want to screen home calls with telephone numbers that are not
saved in your Directory, Allow list, or Star name list; or Press 2 if you do not want to screen calls, and want to allow all incoming calls to get through.
11

Initial basic settings
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number of rings and set the message alert tone. Using the telephone base: 1. Press MENU twice. 2. / -> Voice guide -> SELECT. 3. Set up the answering system by inputting the designated numbers, as
instructed.
Add a Bluetooth® cell phone/headset
Note: Your BL103-2/BL103-3/BL103-4 is compatible with Bluetooth version 2.0 or above devices.
To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base. Bluetooth wireless technology operates within a short range (up to 30 feet). Keep the connected device within 15 feet of the telephone base for optimal performance.
To pair and connect a cell phone using the telephone base: 1. MENU -> / -> Bluetooth -> SELECT. 2. SELECT to select Add cellular. 3. Press SELECT again to turn on the telephone base discoverable mode. 4. Place the cell phone next to the telephone base. Turn on the Bluetooth feature
of your cell phone and search for or add new advices. Once your cell phone finds your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone to continue the pairing process.
To pair and connect a headset using the telephone base: 1. MENU -> / -> Bluetooth -> SELECT. 2. / -> Add headset -> SELECT. 3. Set your headset to discoverable mode -> Press SELECT.
Record your own announcement
Your outgoing announcement plays when calls are answered by the answering system. You can use the preset announcement to answer calls, or replace it with your own recorded announcement.
12

Initial basic settings
Using a cordless handset: 1. MENU -> / -> Answering sys -> SELECT. 2. SELECT to select Announcement. 3. Press 7 to record. 4. Speak towards the handset to record your announcement and press 5 to end
recording and save it.
Using the telephone base: 1. Press MENU twice. 2. SELECT to select Announcement. 3. SELECT to select Record annc. 4. Speak towards the handset or the telephone base to record your announcement
and press 5 to end recording and save it.
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5, or 6 rings. You can also select toll saver. If you choose toll saver, the answering system answers a call after two rings when you have new messages, or after four rings when there are no new messages. This enables you to check for new messages and avoid paying unnecessary long distance charges if you are calling from out of your local area. Using a cordless handset or the telephone base: 1. MENU -> / -> Answering sys -> SELECT. 2. / -> Ans sys setup -> SELECT. 3. / -> # of rings -> SELECT. 4. / to choose among 2, 3, 4, 5, 6, or Toll saver -> SELECT.
Ringer volume
You can set the ringer volume level to one of the six levels, or turn the ringer off, for incoming home or cell calls. Using a cordless handset or the telephone base:
Set ringer volume for incoming home calls: 1. MENU -> / -> Ringers -> SELECT. 2. SELECT to select Home volume. 3. / to choose the desire level -> SELECT.
Set ringer volume for incoming cell calls: 1. MENU -> / -> Ringers -> SELECT. 2. / to to select Cell volume -> SELECT. 3. / to choose the desire level -> SELECT.
13

Initial basic settings
LCD language
Using a cordless handset or the telephone base: 1. MENU -> / -> Settings -> SELECT. 2. SELECT again to select LCD language. 3. / to choose English, Français or Español -> SELECT.
Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. f Press MENU on the handset in idle mode -> enter *364#; or f Press MENU on the base in idle mode -> enter 364#.

Operate

Operation Making a home or cell call
On-hook dialing (predialing)

Steps

Using a cordless handset: f Press HOME/FLASH or /SPEAKER -> Enter the
telephone number. f Press CELL -> Enter the telephone number -> SELECT.
Using the telephone base: f Press /HOME -> Enter the telephone number. f Press /CELL -> Enter the telephone number -> SELECT.

Using a cordless handset: Enter the telephone number ->

Press HOME/FLASH, CELL or /SPEAKER to call.

Using the telephone base:
Enter the telephone number -> Press to call.

/HOME or

/CELL

14

Operate

Operation

Steps

Answering a home Using a cordless handset:

or cell call

Press HOME/FLASH, CELL or /SPEAKER.

Using the telephone base: Press /HOME, or /CELL.

Ending a call

Using a cordless handset: Press OFF/CANCEL or return the handset to the telephone base or charger.
Using the telephone base: Press /HOME or /CELL.

Handset speakerphone

During a call, press /SPEAKER to switch between handsfree speakerphone and normal handset use.

Redial

Using a cordless handset: Press REDIAL repeatedly to select the desired entry ->
HOME/FLASH, CELL or /SPEAKER to call.
Using the telephone base: Press REDIAL/PAUSE repeatedly to select the desired entry -> /HOME or /CELL to call.

Volume control

Using a cordless handset or the telephone base:
Press VOL q to decrease or press VOL p to increase the listening volume during a call.

Call waiting (Requires subscription from telephone)

Press HOME/FLASH on the handset or PTT/FLASH on the telephone base to put current call on hold and to take the new call.

15

Directory

The directory can store up to 1,000 entries, which are shared by all system devices.

Operation Adding an entry in the directory
Searching/dialing an entry

Steps
Using a cordless handset: 1. MENU -> / -> Directory -> SELECT. 2. SELECT to select Add new entry. 3. Enter a telephone number up to 30 digits -> SELECT. 4. Enter a name up to 15 characters -> SELECT.
Using the telephone base: 1. MENU -> / -> Directory -> SELECT. 2. / -> Add new entry -> SELECT. 3. Enter a telephone number up to 30 digits -> SELECT. 4. Enter a name up to 15 characters -> SELECT.
1. Press DIR on the handset or telephone base in idle mode -> / to select the desired directory.
2. Press HOME/FLASH or /SPEAKER on the handset, or press /HOME on the telephone base to call using the home line. -ORPress CELL on the handset, or press /CELL on the telephone base to call using the cell line.

Download a cell phone directory
To download a cell phone directory using the telephone base: Before downloading a directory, make sure the cell phone is paired, active, and connected to your BL103-2/BL103-3/BL103-4.
1. MENU -> / -> Bluetooth -> SELECT. 2. / -> Download dir -> SELECT. 3. Press SELECT to start downloading.

16

® Bluetooth

Connect to CellTM app
If you are using Bluetooth-enabled cell phones with Android® OS 2.3 or above, you may also download the Connect to CellTM application (consists of Caller ID manager and Alerts manager) using the Google Play® Store app to extend the flexibility of yourBL103-2/BL103-3/ BL103-4. Scan the QR code on the right to download the application.

Remote voice control

If you have connected a cell phone to the telephone system, you can activate the voice-controlled application (voice app) of the cell phone, such as Siri®, Google NowTM or S Voice®, using the handset or telephone base.

Compatibility:

The remote voice control feature works with:

Voice-controlled application

Siri

Google Now S Voice

Operation System (Versions supported) iOS (8 or Android (4 or Android (4

above) above)

or above)

Before using the remote voice control feature, make sure you checked the following:
f Your cell phone is paired and connected to your telephone system via Bluetooth.
f No Bluetooth applications are running in the background of your cell phone.
f Keep your cell phone within 15 feet of the telephone base.
f Do not lock up your cell phone’s screen or set passcode for activating the voice app.
f Make sure you have turned on or logged in to the applications on your cell phone that you will be sending your voice commands, such as GPS, e-mail and social networking accounts.
f Your cell phone’s data or Wi-Fi signal is in full strength and your cell phone can connect to the Internet.
f Try to activate the voice app on your cell phone to ensure it is in place.

Android® and Google Play® are registered trademarks of Google Inc. Connect to CellTM is a trademark of Advanced American Telephones. Siri® is a registered trademark of Apple Inc. Google NowTM is a trademark of Google Inc. S Voice® is a registered mark of Samsung Electronics Co., Ltd. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
17

® Bluetooth
To activate remote voice control: 1. Press VOICE.
-ORIf you have two connected cell phones -> / to select a device. 2. When the telephone base or handset plays the confirmation tone, speak toward the telephone base or handset, and then wait for feedback. Make reply to the voice app’s feedback, if necessary. 3. Press CANCEL to exit.
Refer to the online Complete user’s manual for a list of troubleshooting tips on using Remote voice control feature.

Caller ID

This product supports caller ID services offered by most telephone service providers. The telephone stores caller ID information of the last 50 incoming calls in the telephone base. This information is common to all devices.
Caller ID announce
When this feature is on and you have an incoming call, the handset and/or base speaks “Call from…” and the name of the caller based on the directory or caller ID information. You can turn this feature off for the base or each individual handset, or both.
Using a cordless handset or the telephone base: 1. MENU -> / -> Caller ID annc -> SELECT. 2. / to choose On or Off -> SELECT.

Review and dial a number in the call log

1. Press CID on the handset or telephone base in idle mode -> / to scroll through the list.

2. Press HOME/FLASH or /SPEAKER on the handset or /HOME on the telephone base to dial with the home line.

-ORPress CELL on the handset, or press with the cell line.

/CELL on the telephone base to dial

Erase missed calls indicator in the call log
When the screen shows XX Missed calls, scroll the call log one by one, or press and hold OFF/CANCEL on the handset or CANCEL on the telephone base in idle mode.
18

Smart call blocker

If you have subscribed to caller ID service, then you can use the Smart call blocker feature to screen incoming calls.

Note: The screening feature of Smart call blocker is applicable to incoming home calls only. All incoming cell calls will get through and ring. If you want to block a cell call, add the number to the block list.
Turn Smart call blocker on or off
Smart call blocker is set to on, and to allow all incoming calls by default. To turn on or off Smart call blocker: 1. CALL BLOCK. 2. SELECT to choose SCB On/Off. 3. / to choose On or Off -> SELECT.

Notes: Ì Smart call blocker is on, once you install your telephone. It allows all incoming calls to get through
and ring by default. You can change the Smart call blocker settings to screen incoming home calls from numbers or names that are not yet saved in your directory, allow list, block list, or star name list. You can easily add incoming phone numbers to your allow list and block list. This allows you to build up your lists of allowed and blocked numbers, and Smart call blocker will know how to deal with these calls when they come in again. Ì If you turn off Smart call blocker, all incoming calls will ring, including numbers saved in your block list. Ì When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened home calls will be sent to the answering system after screening.

Call controls

Call categories

Unwelcome calls

Ì Numbers saved in block list.

Welcome calls

Ì Numbers saved in allow list.
Ì Numbers saved in directory.
Ì Numbers not found in block list.
Ì Caller ID names saved in star name list.

Call control and options The telephone blocks these calls from ringing through. The telephone allows these calls to get through and ring.
Note: All incoming cell calls will get through and ring by default. If you want to block a cell call, add the number to the block list.

19

Smart call blocker*

Call categories

Call control and options

Unknown calls (for home calls only)

Ì Calls without numbers
– Numbers that are “out of area” or set to “Private”.

You can select one of the following five profile options for handling all unknown home calls.
Screen unknown The telephone plays the screening announcement, and then ask the caller to say his/her name before the call rings on your telephone. You can then answer the call, and hear the caller’s name announced. You can decide whether to accept or reject the call, or to forward the call to the answering system.

Ì Uncategorized calls
– With absent caller ID number.
– Numbers not found in directory.
– Numbers not found in allow list.
– Numbers not found in block list.
– With caller ID names not found in star name list

Screen robot The telephone plays the screening announcement, and then ask the caller to press the pound key (#) before the call rings on your telephone. You can then answer the call.
Allow unknown (default settings) The telephone allows these calls to get through and ring. The caller’s number, even if it is available, will not be saved to the allow list.
Unknown to answering system The telephone forwards these calls to the answering system without ringing.
Block unknown The telephone rejects these calls with block announcement without ringing. The caller’s number, even if it’s available, will not be saved to the block list.

* Includes licenced QaltelTM technology. QaltelTM is a trademark of Truecall Group Limited.
20

Smart call blocker

Set up allow list, block list and star name list

Add numbers from caller ID log

Adding CID log entry to block list
Adding CID log entry to allow list
Adding CID log entry to star name list

1. Press CID on the handset or telephone base -> 2. Press SELECT when the desired entry appears. 3. or -> To Block list -> SELECT. 4. Press SELECT twice.
1. Press CID on the handset or telephone base -> 2. Press SELECT when the desired entry appears. 3. or -> To Allow list -> SELECT. 4. Press SELECT twice.
1. Press CID on the handset or telephone base -> 2. Press SELECT when the desired entry appears. 3. or -> To Star name list -> SELECT. 4. Press SELECT twice.

/. /. /.

Add numbers manually

Adding a new number to the block list

1. CALL BLOCK. 2. or -> Block list -> SELECT. 3. or -> Add new entry -> SELECT. 4. Enter a telephone number up to 30 digits -> SELECT. 5. Enter a name up to 15 characters -> SELECT.

Adding a new number to the allow list
Adding a new name to the star name list

1. CALL BLOCK. 2. or -> Allow list -> SELECT. 3. or -> Add new entry -> SELECT. 4. Enter a telephone number up to 30 digits -> SELECT. 5. Enter a name up to 15 characters -> SELECT.
1. CALL BLOCK. 2. or -> Star name list -> SELECT. 3. or -> Add new entry -> SELECT. 4. Enter a name up to 15 characters -> SELECT.

21

Smart call blocker

Set profile
There are five profile setting options, which allows you to quickly set up Smart call blocker.

Set profile
Screen unknown
Screen all unknown home calls

Steps
1. CALL BLOCK -> or -> Set profile -> SELECT. 2. or -> Screen unknown -> SELECT.

Screen robot Screen robocalls

1. CALL BLOCK -> or -> Set profile -> SELECT. 2. or -> Screen robot -> SELECT.

Allow unknown
Block calls on the block list only (default settings)

1. CALL BLOCK -> or -> Set profile -> SELECT. 2. or -> Allow unknown -> SELECT.

UnknownToAns.S
Forward all unknown home calls to the answering system

1. CALL BLOCK -> or -> Set profile -> SELECT. 2. or -> UnknownToAns.S -> SELECT.

Block unknown
Block all unknown home calls

1. CALL BLOCK -> or -> Set profile -> SELECT. 2. or -> Block unknown -> SELECT.

Add a screened number to the block list or allow list
If you select Screen unknown or Screen robot in Set profile, the telephone plays a screening announcement to the caller, and asks the caller to respond before the call rings through to you. After the caller responds, the telephone rings and you can then pick up the call. The telephone then asks whether you want to answer or reject the call, or to forward the call to the answering system. The telephone announces “To answer the call, press 1. To answer and always allow this number, press 2. To block
this number, press 3. To send this call to the answering system, press 4. To repeat these options, press *”.

22

Smart call blocker

You can add a screened number to the block list or to the allow list.

Add current number to f Press 2 to answer the home call, and add the

the allow list

current number to the allow list.

Add current number to f Press 3 to block the home call, and add the current

the block list

number to the block list.

Notes Ì The screening feature of Smart call blocker is applicable to home calls only. All incoming cell calls
will get through and ring. Ì Unknown home calls without caller ID information will not have the option 2, “answer and always
allow this number”, and option 3, “to block this number”. No number will be added to the allow list or block list for these calls. Ì If you do not want to take the call, press CANCEL to end the call.
Block the caller while on a call
When you are on a home or cell call and speaking to the caller, and you do not want to continue the call, you can end the call with block announcement and add the number to the block list. 1. During a home or cell call, press CALL BLOCK. 2. Press SELECT to end the call.
Notes Ì The allow list stores up to 200 entries, the block list stores up to 1,000 entries, and the star name
list stores up to 10 names. Ì There are many organizations like schools, medical offices, and pharmacies that use robocalls to
communicate important information to you. Robocall uses an autodialer to deliver pre-recorded messages. By entering the name of the organizations into the star name list, it ensures these calls will ring through when you only know the caller names but not their numbers.
Unblock a telephone number
If you have added a telephone number to the block list, you can unblock it. 1. Press CALL BLOCK. 2. or -> Block list -> SELECT. 3. Press SELECT to select Review. 4. or to browse through the block entries. 5. When the desired entry displays, press DELETE, then press SELECT to confirm.

23

Answering system

About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service provider’s voicemail. To listen to messages recorded on the built-in answering system, refer to the Message playback section; to listen to voicemail, contact your telephone service provider for more information.

Built-in answering system

Voicemail service

Supported by

Telephone system

Telephone service provider

Subscription

No

Yes

Fees

No

May apply

f After 3 rings by default.

Answer

f It can be changed in the

incoming calls

handset or the telephone

base menu.

f Usually after 2 rings.
f It can be changed by contacting your telephone service provider.

Storage

Telephone base

Server or System

Display new messages

f Handset and telephone base f Handset and telephone base

– XX New messages

– and New voicemail

Retrieve messages

f Press on the telephone

base; OR

f Press MENU, and then select Play messages on the handset; OR
f Access remotely with an

f Press on the dialpad, and enter an access number from your telephone service provider.

access code.

24

Answering system
Turn answering system on or off
The answering system must be turned on to answer and record messages. Using a cordless handset: 1. MENU -> / -> Answering sys -> SELECT. 2. / -> Answer on/off -> SELECT. 3. / to choose On or Off-> SELECT. When the answering system is on, the handset shows ANS ON. Using the telephone base: f Press /ANS ON to turn the answering system on or off. If the answering
system is turned on, it announces, “Calls will be answered.” If the answering system is turned off, it announces, “Calls will not be answered.”
Message alert tone
When this feature is on, and there is at least one new message, the telephone base beeps every 10 seconds.
Using a cordless handset or the telephone base: 1. MENU -> / -> Answering sys -> SELECT. 2. / -> Ans sys setup -> SELECT. 3. / -> Msg alert tone -> SELECT. 4. / to choose On or Off -> SELECT.
Call screening
Use this feature to choose whether incoming messages can be heard over the speaker when they are being recorded. If you turn call screening on, you hear the incoming message. While monitoring an incoming message, you can answer the call by pressing HOME/FLASH on the handset or /HOME on the telephone base. Using a cordless handset or the telephone base: 1. MENU -> / -> Answering sys -> SELECT. 2. / -> Ans sys setup -> SELECT. 3. SELECT to select Call screening. 4. / to choose On or Off -> SELECT.
25

Answering system

Message playback
Using the telephone base: Ì Press /PLAY/STOP when the telephone base is in idle mode. Using a cordless handset: Ì Press MENU then SELECT when the handset is in idle mode.
Options during playback

Feature
Adjust playback to volume
Stop playback

On the telephone base Press VOL
Press PLAY/STOP

Skip to the next message
Repeat the message
Play the previous message
Delete the message

Press /SKIP
Press /REPEAT Press /REPEAT twice Press X/DELETE

On a handset Press VOL or VOL
Press OFF/CANCEL Press 6
Press 4 Press 4 twice
Press MUTE/DELETE

26

For C-UL compliance
In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included.
Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation. Respectez toujours les mesures de sécurité et de sécurité de base lorsque vous utilisez ce produit, afin de réduire les risques de blessures, d’incendie, ou d’électrocution.
Information relative à la sécurité f Veuillez lire et comprendre toutes les instructions de ce guide d’utilisation.
Relectez toutes les inscriptions apparaissant sur le produit. f Évitez d’utiliser le téléphone pendant un orage. Il pourrait y avoir un faible risque
d’électrocution. f N’utilisez pas un téléphone près d’une fuite de gaz. Dans certaines circonstances,
une flammèche pourrait se produire lorsque l’adaptateur est branché à une prise de courant, ou lorsque le combiné est déposé sur son chargeur. Ceci est un événement fréquent associé avec la fermeture d’un circuit électrique. L’utilisateur ne devrait pas brancher un téléphone dans une prise de courant, et ne devrait pas déposer un combiné chargé dans le chargeur, si le téléphone se trouve dans un environnement comportant une concentration de gaz inflammables ou ignifuges, à moins de se trouver dans un endroit où la ventilation est adéquate. Une flammèche dans de tels environnements pourrait provoquer une explosion. De tels environnements peuvent comprendre : les endroits où de l’oxygène à des fins médicales est utilisé sans ventilation adéquate; des endroits où se trouvent des gaz industriels (dissolvants de nettoyage, des vapeurs de gazoline, etc.), une fuite de gaz naturel, etc. f N’utilisez pas ce produit près de l’eau ou lorsque vous êtes mouillés. Par exemple, ne l’utilisez pas dans des sous-sols humides ou sous la douche, ou près d’une piscine, d’un bain, d’un évier de cuisine, ou d’une cuve de lavage. N’utilisez pas de liquides, ou de vaporisateurs aérosol de nettoyage. Si le produit entre en contact avec du liquide, débranchez immédiatement le fil téléphonique ou le cordon d’alimentation. Ne rebranchez pas le produit avant qu’il soit complètement sec. f Installez cet appareil dans un endroit protégé où personne ne peut trébucher sur les cordons d’alimentation ou la ligne téléphonique. Protégez les câbles contre les dommages ou l’abrasion.
27

For C-UL compliance
f Si le produit ne fonctionne pas correctement, consultez la section Dépannage (Troubleshooting) du guide d’utilisation. Si vous ne pouvez pas régler le problème, ou si le produit est endommagé, consultez la section Garantie limitée (Limited warranty) des pages 33-35. N’ouvrez pas ce produit, sauf tel qu’indiqué dans le guide d’utilisation. L’ouverture du produit ou le remontage inadéquat pourrait vous exposer à des tensions dangereuses ou autres dangers.
f Remplacez les piles uniquement tel que décrit dans votre guide d’utilisation (Page 5). N’incinérez pas et ne percez pas les piles — elles contiennent des produits chimiques caustiques.
f L’adaptateur de courant est conçu pour être orienté verticalement ou installé sur le plancher. Les broches ne sont pas conçues pour se maintenir en place si la fiche est branchée dans une prise de courant au plafond, sous la table ou sous une armoire.
f Pour les produits à brancher à une prise de courant, la prise de courant doit être installée près du produit, afin d’assurer une accessibilité sécuritaire à la prise de courant.
MISES EN GARDE: f N’utilisez seulement l’adaptateur inclus avec ce produit. Pour obtenir une pièce
de rechange, visitez notre site Web au
https://telephones.att.com ou composez le 1-800-222-3111. Au Canada, composez le 1-866-288-4268.
f N’utilisez que la pile de rechargeable incluse ou une pile de rechange (modèle BT162342/BT262342). Pour commander, visitez notre site Web
https://telephones.att.com ou composez le 1-800-222-3111. Au Canada, composez le 1-866-288-4268.
i ATTENTION: Afin de prévenir les risques d’incendie ou d’explosion de la pile, replacez la pile avec une pile du même type. Jetez les piles épuisées en respectant les instructions.
28

For C-UL compliance
Spécifiquement en rapport avec les téléphones sans fil f Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil
si pratiques créent également des restrictions. Les appels téléphoniques sont transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au sein de la portée du téléphone sans fil. Pour cette raison, vous ne devez pas considérer les conversations sur un téléphone sans fil comme étant aussi confidentielles que celles d’un téléphone à cordon. f Alimentation électrique : La base de ce téléphone sans fil doit être branchée à une prise de courant électrique fonctionnelle. La prise électrique ne doit pas être contrôlée par un interrupteur mural. Les appels ne peuvent pas être effectués à partir du combiné si la base n’est pas branchée, si elle est hors fonction ou si le courant électrique est coupé. f Interférences potentielles aux téléviseurs : Certains téléphones sans fil fonctionnent sur des fréquences pouvant causer des interférences aux téléviseurs et magnétoscopes. Pour réduire ou prévenir de tels parasites, ne pas déposer la base du téléphone sans fil à proximité d’un téléviseur ou magnétoscope, ni directement sur celui-ci. Si votre téléviseur affiche des interférences, éloignez le téléphone sans fil de celui-ci afin de réduire les parasites. f Piles rechargeables : Ce produit comporte des piles rechargeables à l’hydrure métallique de nickel. Usez de prudence lorsque vous manipulez de telles piles et veillez à ne pas les court-circuiter avec des matériaux conducteurs, tels que des bagues, bracelets et clés. La pile ou le conducteur peut surchauffer et vous brûler. Respectez la polarité adéquate entre les piles et le chargeur de piles.
f Piles rechargeables à l’hydrure métallique de nickel : Jetez ces piles de manière sécuritaire. N’incinérez pas et ne peercez pas les piles. Comme pour les autres piles du même type, si elles sont brûlées ou percées, des matières corrosives peuvent s’en échapper, ce qui risque de causer des brûlures ou autres blessures corporelles.
Le sceau de l’organisme de recyclage RBRC sur les piles à l’hydrure métallique de nickel signifie que le fabricant de cet appareil participe volontairement au programme industriel visant à reprendre et recycler ce type de piles lorsqu’elles ne servent plus, au sein du territoire des États-Unis et du Canada. Vous devez apporter ces piles chez un détaillant participant ou le centre de recyclage le plus près de chez vous. Ou vous pouvez composer le 1-800-8-BATTERYMD afin de connaître les endroits qui acceptent les piles à l’hydrure métallique de nickel mortes.
Le sceau RBRC et 1-800-8-BATTERYMD sont des marques déposées de Call2recycle, Inc.
29

For C-UL compliance
Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) : L’organisme `Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme. Appuyée par l’Administration des aliments et drogues (FDA) des Étatsunis, la firme WTR recommande aux médecins : Avis aux détenteurs de stimulateurs cardiaques: f Ils doivent tenir le téléphone sans fil à une distance d’au moins six pouces du
stimulateur cardiaque. f Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur
cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en fonction. f Ils doivent utiliser le téléphone sans fil en l’appuyant sur l’oreille qui se trouve
dans la direction opposée au stimulateur cardiaque. L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs cardiaques causé par les gens qui utilisent un téléphone sans fil à proximité de ceux-ci.
Mode ECO Lorsque le socle communique avec le combiné, le mode ECO sera activé automatiquement. Ceci réduit la consommation d’énergie selon la distance entre le socle du téléphone et le combiné.
Spécifiquement en rapport avec les répondeurs téléphoniques Enregistrement deux voies : Cet appareil n’émet pas de bips d’avertissement qui permettent de prévenir l’autre partie que vous enregistrez la conversation. Pour assurer votre conformité aux règlements fédéraux ou provinciaux en rapport avec les enregistrements des conversations téléphoniques, vous devriez informer l’autre partie lorsque vous activez l’enregistrement.
CONSERVEZ CES INSTRUCTIONS
30

FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider.
This equipment must not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, consult your telephone service provider or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Replacement to this telephone equipment can only be made by the manufacturer or its authorized agents. For replacement procedures, follow the instructions outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
f Remain on the line and briefly explain the reason for the call before hanging up.
f Perform such activities in off-peak hours, such as early morning or late evening.
31

Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone. The term `’IC:`’ before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
FCC Part 15
NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: f Reorient or relocate the receiving antenna. f Increase the separation between the equipment and receiver. f Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. f Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
32

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B)
Limited warranty
The AT&T brands are used under license. This product is covered by a one-year limited warranty. Any replacement or warranty service, and all questions about this product, should be directed to our website at
https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
1. What does this limited warranty cover?
The manufacturer of this AT&T Product, Advanced American Telephones, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided by Advanced American Telephones in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operation instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.
2. What will Advanced American Telephones do if the Product is not free from material defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)? During the limited warranty period, Advanced American Telephones’ authorized service representative will replace, at Advanced American Telephones’ option, without charge, a Materially Defective Product. If we choose to replace this Product, we may replace it with a new or refurbished Product of the same or similar design. Advanced American Telephones will return replacement Products to you in working condition.
Advanced American Telephones will retain defective parts, modules, or equipment. Replacement of Product, at Advanced American Telephones’
33

option, is your exclusive remedy. You should expect the replacement to take approximately 30 days.
3. How long is the limited warranty period? The limited warranty period for SynJ® and Syn248® products is TWO (2) YEARS from the date of purchase, while all other products limited warranty period is ONE (1) YEAR from the date of purchase. If we replace a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to replacement Products for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the original one-year limited warranty, whichever is longer.
4. What is not covered by this limited warranty?
This limited warranty does not cover:
f Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or
f Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of Advanced American Telephones; or
f Product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or
f Product to the extent that the problem is caused by use with non-Advanced American Telephones electrical accessories; or
f Product whose warranty/quality stickers, Product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or
f Product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or
f Product returned without valid proof of purchase (see item 6); or
f Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
5. How do you get warranty service?
To obtain warranty service in the United States of America, visit https:// telephones.att.com or call 1 (800) 222-3111. In Canada, please dial 1 (866) 288-4268.
NOTE: Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product(s) to the service location. Advanced American Telephones will return replaced Product under this limited warranty to
34

you, transportation, delivery or handling charges prepaid. Advanced American Telephones assumes no risk for damage or loss of the Product in transit. 6. What must you return with the PRODUCT to get warranty service? f Return the entire original package and contents including the Product to the
Advanced American Telephones service location along with a description of the malfunction or difficulty; f Include “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and f Provide your name, complete and correct mailing address and telephone number.
7. Other limitations This warranty is the complete and exclusive agreement between you and Advanced American Telephones. It supersedes all other written or oral communications related to this Product. Advanced American Telephones provides no other warranties for this Product. The warranty exclusively describes all of Advanced American Telephones’ responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from date of purchase. Some states/ provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
In no event shall Advanced American Telephones be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product, or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
35

Technical specifications

RF frequency band
Channels
Telephone base voltage (AC voltage, 60Hz)
Telephone base voltage (DC adapter output)
Handset battery
Charger voltage (AC adapter output)
Operating times*

1921.536MHz — 1928.448MHz 5 96 — 129 Vrms
6VDC @600mA
2.4 VDC, AAA x 2, Ni-MH 6VDC @400mA
Talk time (handset): up to 10 hours Standby: up to 5 days

* Operating times vary depending on your actual use and the age of the battery.

Company: Advanced American Telephones Address: 9020 SW Washington Square Road – Ste 555 Tigard, OR 97223, United States.
Phone: 1 (800) 222-3111 in the U.S. or 1 (866) 288-4268 in Canada
Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.
The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to supply this product with an ENERGY STAR® qualified power adapter meeting the latest energy efficiency guidelines.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade
names are those of their respective owners. ©2020-2021 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Siri® is a registered trademark of Apple Inc.
Android® is a registered trademark of Google Inc. Connect to CellTM is a trademark of Advanced American Telephones.
Google NowTM is a trademark of Google Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used
under license. QaltelTM is a trademark of Truecall Group Limited. S Voice® is a registered mark of Samsung Electronics Co., Ltd. The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of Call2recycle, Inc.
Printed in China. Issue 3.1 AT&T 06/21.

Documents / Resources

ATT BL103 [pdf] User Manual
BL103-X, BL103-2, BL103-3, BL103-4

References

Leave a comment

Your email address will not be published.