ASTRAL CS15X18 Siphon Box

Product Specifications

• Product Name: Catch Basin
• Material: PVC
• Color: White
• Dimensions: Varies
• Additional Component: Sealing Ring (sold separately)

INSTALLATION

1. Cut the sealed inlets of the box using a hole saw or an appropriate tool.
2. Remove burrs with a file or fine sandpaper.
3. On the inlet, apply PVC glue to the ends of the pipes and insert them firmly.
   On the outlet, use a sealing ring* or glue.
   To ease installation, apply lu-bricant oil or petroleum jelly to the ring before fitting.

Sold separately

EXTENDER
To increase the height of Ø 15 cm siphon boxes, use a 150 mm (6-inch) sewer pipe cut to the desired height.

CLEANING

To clean and inspect the drainage system, remove the water trap by pulling it back for easier cleaning.

ATTENTION:
The use of the catch basin does not eliminate the need for a water trap in the installation.

FAQ

• Q: Can I use the catch basin without a water trap?
  • A: No, the catch basin does not eliminate the need for a water trap in the installation. It is essential to have a water trap for proper drainage system functioning.
• Q: Do I need to purchase the sealing ring separately?
  • A: Yes, the sealing ring is sold separately and is necessary for securing the outlet of the catch basin. Ensure you have it before installation.

Documents / Resources

ASTRAL CS15X18 Siphon Box [pdf] Installation Guide CS15X18, CS15X18 COMEX, CS15X18 Siphon Box, CS15X18, Siphon Box, Box

References

• User Manual