AS-TECH-LOGO

 asTech All-In-One Diagnostics Calibrations

asTech-All-In-One -Diagnostics-Calibrations-PRODUCT

Product Information

Specifications:

  • Product Name: All-In-One tablet with VCI Link
  • Connectivity: Wi-Fi
  • Compatibility: Works with asTech App and Link

Product Usage Instructions

Connect tablet to Wi-Fi:
On the device home screen, tap Settings > Network & Internet > Wi-Fi. Slide the Wi-Fi switch to ON.

Connect carside device:
Ensure your asTech app and Link have the most recent software update.

Login to asTech App:

  1. Connect to the car and click Remote Diagnostic Mode.
  2. Select WLAN.
  3. Select your Wi-Fi network.
  4. Login and connect to your Wi-Fi network.
  5. Once the screen shows with 2 blue checks, you are ready to go!

Start New Request:
On your tablet, tap the center blue asTech button to open the app and log in using your credentials. You can now select your vehicle and click New Request.

FAQ

Q: How do I ensure my asTech app and Link have the most recent software update?
A: To update your asTech app and Link, check for updates in the respective app stores or contact customer support for assistance.

Q: What should I do if I encounter connectivity issues during the login process?
A: Make sure you are within range of a stable Wi-Fi connection and verify that the correct Wi-Fi network is selected on both the tablet and carside device. If issues persist, restart both devices and try the login process again.

Connect tablet to Wi-Fi

asTech-All-In-One -Diagnostics-Calibrations-FIG- (1)

On the device home screen, tap Settings > Network & Internet > Wi-Fi. Slide the Wi-Fi switch to ON.
*Ensure your asTech app and Link have the most recent software update.

Connect carside device

asTech-All-In-One -Diagnostics-Calibrations-FIG- (3)

  1. Connect to car and click Remote Diagnostic Mode.
  2. Select WLAN.
  3. Select your Wi-Fi network
  4. Login and connect to your Wi-Fi network.
  5. Once the screen shows 2 blue checks, you are ready to go!

Login to as Tech App

asTech-All-In-One -Diagnostics-Calibrations-FIG- (2)

On your tablet, tap the center blue Tech button to open the app and log in using your credentials.

Start New Request

asTech-All-In-One -Diagnostics-Calibrations-FIG- (4)

You are now able to go into the BasTech app, select your vehicle, and click New Request!

Documents / Resources

asTech All-In-One Diagnostics Calibrations [pdf] User Guide
All-In-One Diagnostics Calibrations, Diagnostics Calibrations, Calibrations

References

Leave a comment

Your email address will not be published. Required fields are marked *