AsReader ASR-P37U Box Type Mini
Specifications
- Model: ASR-P37U
- RFID: ISO/IEC 18000-63 (Former 18000-6C) / EPCglobal Class 1 Gen 2
- Radio Frequency: Japan: 920.6 ~ 923.4MHz, North America: 917.1 ~ 926.9MHz, Europe: 865.7 ~ 867.5MHz
- RF Output Power: Japan: Max 200mW (23dBm), North America: Max 500mW (27dBm), EU, UK: Max 500mW (27dBm)
- Power Source: USB Type-C port (POWER/PC) Input rating: 5V/0.5A
- Functions: Read/Write/Lock/Kill
- Antenna Terminal: SMA male
- Human Interface: Trigger button, Dip switch (SCAN), Dip switch (MODE), Beep sound, Blue LED
- Appearance: Resin material, Resin color
- Environment: Operating, Storage
- Protection Ratings: Drop resistant
- Certifications: Supported OS
- Accessories: USB Type-C port (PHONE) (*1), USB Type-C port (POWER/PC) (*2)
FAQ
- Q: What should I do if the device is not powering on?
- A: If the device is not powering on, please check the power source and ensure it is connected properly. If the issue persists, contact customer support.
- Q: Can the device be used with Windows operating systems?
- A: Yes, the device supports Windows operating systems for power input and connection.
About BOX-Type Mini
Introduction
Thank you for purchasing the BOX-Type Mini ASR-P37U.
This manual describes how to operate the BOX-Type Mini ASR-P37U (hereinafter referred to as the ASR-P37U, or the AsReader). Please read the manual carefully and keep it for as long as you have the device.
ASR-P37U is a high-performance UHF RFID reader, which supports desktop and wall mounted use.
ASR-P37U supports USB serial mode and HID data transmission mode.
ASR-P37U can be used in a wide variety of radio frequency identification (RFID) application systems, such as asset management, checking inventory, retail transactions, attendance management, conference check-in, access control, production process control, and many more.
If you have any comments or questions about this manual, please contact us:
AsReader Inc. (United States)
- Toll Free (US+Canada): +1 (888) 890 8880 / Tel: +1 (503) 770 2777 x102
- 111 SW 5th Ave., 31st Fl., Suite 3150, Portland, OR 97204-3656 U.S.A.
- https://AsReader.com
Asterisk Inc. (Japan)
- AsTech Osaka Building 5F, 2-2-1, Kikawanishi, Yodogawa-ku, Osaka, 532-0013 JAPAN
- https://asreader.jp
- The copyright of this manual belongs to the company. Without permission from the company, no reproduction, reprinting, modification or translation into other languages is allowed.
- The contents of this manual are subject to change without prior notice. In addition, the images in this manual are all reference images and may be different from the actual product.
- Warning: Please read this manual before use. Incorrect use of this device could result in property damage, serious personal injury, or even death. We will not be responsible for any loss caused by non-compliance with this manual.
- We cannot take responsibility for any damage resulting from natural disasters like earthquakes, lightning, wind, floods, or fires beyond our control. Additionally, damages caused by third-party actions, accidents, intentional or negligent acts, misuse, or abuse are also not our responsibility.
- If the damage is caused by falling or collision as determined by our company, the maintenance fee will be charged even within the warranty period.
- We will take appropriate measures to ensure that our products do not infringe on other patents, but we are not responsible for any patent infringement caused by any of the following (1) to (4).
- Used in combination with components, products, equipment, data processing systems or software outside our company.
- Our products are used in unexpected ways.
- Modification of our products by any person or company other than our company.
- Use outside of the country where the products are purchased.
Safety instructions
Please read the following instructions carefully to prevent injury, malfunction, fire, etc.
Warning
- Do not attempt to disassemble, modify or repair the AsReader yourself, otherwise it may cause malfunction, fire or electric shock. We will not be held responsible for any problems that may occur with the AsReader, PC, smart devices, etc. due to modifications.
- If you notice any abnormalities such as smoke, abnormal odor, or strange noise coming from the AsReader during use, stop using it immediately. Continued use may cause fire or electric shock.
- Do not drop or throw the AsReader and subject it to strong impact. It may cause damage, fire, electric shock, or malfunction. It may also cause injury. If the AsReader is damaged by dropping and the inside of the AsReader is exposed, do not touch the exposed part with your hands, because there is a risk of electric shock or injury on the damaged part.
- Do not allow metal or other objects to come into contact with the terminals of each connector.
- Doing so may cause a large current to flow, resulting in overheating, fire, or damage to the device.
- Do not get the AsReader wet with water or any other liquid. Doing so may result in fire or electric shock. If foreign matter or water does get inside the AsReader, unplug the power cable immediately.
- Do not use, store, or leave the AsReader in hot places (eg. by the fire, near a heater, in direct sunlight, in a car in hot weather). It may cause rupture, malfunction, fire or injury.
- Do not use the AsReader with any power supply voltage other than the specified. Doing so may result in damage to the equipment or an accidental fire.
- When constructing a system that may affect human life, such as the management of chemicals using the AsReader, please pay close attention to redundancy and safety design so that even if the data is incorrect, there is no possibility of it affecting human life.
- The AsReader is an RFID reader that uses UHF radio waves with an output power of 500 mW. Therefore, depending on the application and location of use, it may affect medical equipment. In order to minimize this effect, the following must be strictly observed during operation.
- The AsReader operators should keep the AsReader at least 22cm (9in) from any site where implantable medical devices are installed.
- Persons with implanted medical devices should not come within 22cm (9in) of the AsReader.
- When taking the AsReader overseas, please consult with us in advance, as it is necessary to comply with the laws and regulations of each country and region.
Caution
- This product has been certified in accordance with the radio wave laws of each country.
- Since each country or region has different regulations regarding radio waves, it is necessary to comply with the respective regulations. Modification of this product is prohibited, and violations may result in penalties according to the regulations of each country or region.
- Please refer to local regulations when you recycle this device.
- If you notice any abnormalities, please discontinue use and contact your distributor immediately.
- Do not place the AsReader in direct sunlight or where the temperature is very high, which will damage the data cable and components, or cause fire.
- Do not place the product on an unstable surface such as a wobbly table or a tilted surface.
- It may fall and cause damage.
Product appearance
Specifications
| Model | ASR-P37U | |
|
RFID |
Spec | ISO/IEC 18000-63 (Former 18000-6C) / EPCglobal Class 1 Gen 2 |
|
Radio frequency |
Japan: 920.6 ~ 923.4MHz
North America: 917.1 ~ 926.9Mhz Europe: 865.7 ~ 867.5Mhz |
|
|
RF output power |
Japan: Max 200mW (23dBm)
North America: Max 500mW (27dBm) EU, UK: Max 500mW (27dBm) |
|
| Antenna terminal | SMA male | |
| Functions | Read/Write/Lock/Kill | |
| Power source | USB Type-C port (POWER/PC) Input rating: 5V/0.5A | |
| Button | Trigger button | |
| Switch | Dip switch | |
|
Human interface |
Trigger button (SCAN) Dip switch (MODE) Beep sound
Blue LED（Power on: Slow flashing / USB connection: Light on / Reading RF tags: Fast flashing） |
|
|
interface |
Communication | USB Type-C port (PHONE) (*1) (USB 2.0) |
| Power & Communication | USB Type-C port (POWER/PC) (*2) (Power input and USB 2.0) | |
|
Appearance |
Dimensions (W)x(D)x(H) | 2.0 × 2.2 × 0.6 inches (52 × 56 × 16mm) (*3) |
| Weight | Approx. 1.4oz (40g) | |
| Resin material | PC+ABS | |
| Resin color | White | |
|
Environment |
Operating | -10 ~ 45 ˚C, 20 ~ 85 % RH |
| Storage | -20 ~ 60 ˚C, 10 ~ 95 % RH | |
| Protection ratings | IP54 compliant (*4) | |
| Drop resistant | 4.9 feet (1.5m) Twice each on 6-sides and 4-corners (*4) | |
| Certifications | TELEC | |
| Supported OS | Android, Windows, iOS (*5) | |
| Accessories | USB Type-C to Standard-A cable, Mounting frame | |
*1: For Android device.
*2: For power input and Windows device connection.
*3: The dimensional values do not include the antenna terminal.
*4: These tests were conducted on the device alone
*5: Only supports the HID mode.
Basic operations
Connect an antenna
- Please connect the RF cable of an antenna to the Antenna Terminal (see FIG. 1-3- 1①) of the ASR-P37U.
Power on/off
- Use a USB Type-C data cable to connect the ASR-P37U to a power adapter via the Power & Communication Port (see FIG. 1-3-1⑤). The LED Indicator flashes slowly when power on is successful (see FIG. 1-3-1③) and there will be two buzzing prompts.
- Unplug the USB Type-C data cable to power off.
Power supply
- DC 5V/0.5A.
Working mode
The ASR-P37U has two working modes: HID mode and Serial mode.
HID mode
HID (Human Interface Device) mode: When this product is connected to a mobile device (or a PC) in HID mode, this product is recognized as a keyboard, and the data read by this product is sent to the mobile device (or the PC) “as is.” Therefore, there is no need to use an App that uses a dedicated SDK. HID mode supports Android, Windows and iOS devices.
Serial mode
- This mode enables real-time data transfer between ASR-P37U and the App that uses a dedicated SDK.
- There are dedicated SDKs for Android and Windows.
How to change modes?
- Switch between Serial mode and HID mode by switching Dip Switch 2’s ON/OFF switch (see FIG. 1-3-2⑥) of the ASR-P37U.
- If it is powered on, the mode switching is completed after two buzzes.
How to read RFID tags in the HID mode?
With the ASR-P37U powered on, put RFID tags close to the Antenna attached to it(see FIG. 1-3-1①). Then, press the “SCAN” trigger button (see FIG. 1-3-1②). The blue light flashes quickly and the data will be entered at the cursor on the screen of the connected device. Press the trigger button again to stop reading.
How To Connect
How to connect (Serial mode)
Operation steps:
Android
Method 1 (with a power adapter)
- Power on the ASR-P37U (see Power on/off).
- Launch the ASR-P3xU app for Android.
- Connect the Android device and the ASR-P37U with USB Type-C to USB Type-C data cable via the Communication Port (see FIG. 1-3-1④). The LED Indicator stays ON when the connection is successful.
- If the port of your Android device is not USB Type-C, you can use a cable which is suitable for your Android device port to connect.
- If the port of your Android device is not USB Type-C, you can use a cable which is suitable for your Android device port to connect.
- When using while charging the Android device, please connect a USB hub to the Power & Communication Port (see FIG. 1-3-1⑤) of the ASR-P37U using the USB Type-C to Type-C data cable, and then connect the USB hub to the Android device. Then, connect the power adapter to the USB Hub to supply power to the Android device.
Method 2 (without a power adapter)
- Launch the ASR-P3xU app for Android.
- Connect the Android device and the ASR-P37U with a USB Type-C to USB Type-C data cable via the Power & Communication Port. The LED Indicator stays ON to indicate that the power is on and the connection is successful.
In this method, the ASR-P37U is powered by the Android device. If an Android device with low output current is connected, the ASR-P37U may not work properly.
Windows
- Use the USB Type-C data cable to connect the ASR-P37U to a Windows device via the Power & Communication Port. The LED Indicator stays ON to indicate that the power is on and the connection is successful.
- Launch the ASR-P3xU app for Windows.
How To Attach
Prepare accessories for affixing to a surface
- A mounting frame to affix the ASR-P37U is included in the accessories.
- The ASR-P37U is mounted to the mounting frame when it leaves the factory.
Method of mounting the ASR-P37U to the mounting frame
Please follow the steps below to mount the ASR-P37U to the mounting frame. (see FIG. 5-2)
- Insert the ASR-P37U under the larger fastener of the mounting frame.
- Press the upper part of the ASR-P37U into the mounting frame.
- The installation is complete when the pressed side of the ASR-P37U fits in the three smaller fasteners.
Method of removing the mounting frame of ASRP37U
Please follow the steps below to remove the mounting frame of ASR-P37U. (see FIG. 5-3)
- Open the three smaller fasteners of the mounting frame.
- Lift the ASR-P37U up and remove it from the mounting frame.
Method of affixing the ASR-P37U using a mounting frame
ASR-P37U can be affixed through any of the following methods
- Affixed by magnets of the mounting frame (see FIG. 5-4)
- Mount the ASR-P37U to the mounting frame. (see FIG. 5.3)
- Attach to a metal object using the built-in magnets of the mounting frame. (The magnets are under the lids of the mounting frame.)
- Attached to a surface through the screw holes on the mounting frame. (see FIG. 5-5)
- Mount the ASR-P37U to the mounting frame. (see 5.3)
- Press according to the direction of the arrows on the picture to open the fasteners of lids.
- Remove the lids of the mounting frame.
- Affix the ASR-P37U to a flat surface such as a wall using the screw holes under the lids. Please prepare appropriate screws for mounting.
- Cover the lids back after affixing with screws.
Please remove the lids first when you want to unscrew the screws.
The lids can be removed by opening the fasteners of the lids indicated by the arrows. (see FIG. 5-6)
Contact
AsReader BOX-Type Mini (ASR-P37U)
AsReader Inc.
- 111 SW 5th Ave., Ste 3150 Portland, OR 97204-3656 U.S.A.
- Tel.: 503-770-2777 x102
Asterisk Inc.
- AsTech Osaka Building 5F, 2-2-1, Kikawa-nishi, Yodogawa-ku, Osaka, 532-0013, JAPAN
Revision History
| Version | Modified Contents | Date |
| V1.0 | Initial version | 2023/11/06 |
|
V1.1 |
1. Updated the Specifications
2. Added how to use the Android device while charging |
2024/1/29 |
| V1.2 | Added the description of mounting frame | 2024/2/29 |
Copyright © Asterisk Inc. All Rights Reserved.
AsReader ® is registered trademarks of Asterisk Inc.
Other company and product names are generally trademarks or registered trademarks of their respective companies.
Documents / Resources
 |
AsReader ASR-P37U Box Type Mini [pdf] User Manual ASR-P37U, ASR-P37U Box Type Mini, ASR-P37U, Box Type Mini, Type Mini, Mini |
