TECKNET TK-MS063 Ergonomic Wireless Vertical Mouse User Manual

1. Introduction

Thank you for choosing the TECKNET TK-MS063 Ergonomic Wireless Vertical Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your mouse to ensure optimal performance and comfort. This vertical mouse is designed to reduce wrist strain and enhance productivity with its multi-device connectivity and adjustable DPI settings.

Please read this manual thoroughly before using the product and retain it for future reference.

2. Product Overview

Package Contents:

• TECKNET Ergonomic Wireless Vertical Mouse
• USB-A Receiver
• USB-C Charging Cable
• User Manual

Mouse Components:

• Left/Right Click Buttons: Standard mouse functions.
• Scroll Wheel: For vertical scrolling.
• DPI Switch Button: Adjusts cursor sensitivity.
• Forward/Backward Buttons: For web page navigation (Note: Not supported on macOS).
• Type-C Charging Port: For recharging the internal battery.
• ON/OFF Switch: Powers the mouse on or off.
• USB Receiver Slot: Stores the 2.4G USB-A receiver.
• Bluetooth Pairing Button: Initiates Bluetooth pairing mode.

3. Setup and Connection

The TECKNET TK-MS063 mouse offers three connection modes: 2.4GHz wireless via USB receiver, Bluetooth 5.3, and Bluetooth 3.0. It supports seamless switching between up to three devices.

3.1 Charging the Mouse

Before first use, it is recommended to fully charge the mouse. Connect the provided USB-C charging cable to the mouse's Type-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status.

A full charge takes approximately 2-3 hours and provides up to 3 months of use (based on 2 hours of daily use). The LED indicator will flash when the battery is low.

3.2 2.4GHz Wireless Connection (USB Receiver)

1. Locate the USB-A receiver stored in the compartment on the bottom of the mouse.
2. Plug the USB-A receiver into an available USB port on your computer.
3. Turn on the mouse using the ON/OFF switch located on the bottom.
4. The mouse should automatically connect to your computer. If not, press the Bluetooth pairing button once to switch to 2.4G mode (indicated by a specific LED flash, refer to LED indicator section).

3.3 Bluetooth Connection (BT5.3 / BT3.0)

The mouse supports two Bluetooth channels (BT1 and BT2) for connecting to different devices.

1. Turn on the mouse using the ON/OFF switch.
2. Press and hold the Bluetooth pairing button on the bottom of the mouse for 3-5 seconds until the LED indicator starts flashing rapidly (e.g., blue for BT1, green for BT2). This indicates pairing mode.
3. On your device (laptop, tablet, etc.), go to Bluetooth settings and search for new devices.
4. Select "TECKNET Mouse" or a similar name from the list of available devices.
5. Once connected, the LED indicator on the mouse will stop flashing and remain solid for a few seconds before turning off.
6. To connect a second Bluetooth device, repeat steps 2-5, but press the Bluetooth pairing button to switch to the other Bluetooth channel (BT2) before holding it down for pairing.

4. Operation

4.1 Switching Between Devices

To switch between connected devices (2.4G, BT1, BT2), simply press the Bluetooth pairing button on the bottom of the mouse. The LED indicator will briefly light up to show which channel is active.

4.2 Adjusting DPI Sensitivity

The mouse features 6 adjustable DPI levels: 800, 1200, 1600, 2400, 3200, and 4800 DPI. Press the DPI switch button (located behind the scroll wheel) to cycle through the sensitivity settings. The LED indicator will flash a corresponding number of times to indicate the current DPI level:

• 1 flash: 800 DPI
• 2 flashes: 1200 DPI
• 3 flashes: 1600 DPI
• 4 flashes: 2400 DPI
• 5 flashes: 3200 DPI
• 6 flashes: 4800 DPI

4.3 Ergonomic Design and Silent Clicks

The mouse is designed with a 57° ergonomic angle to promote a natural hand and wrist posture, reducing strain during extended use. All buttons are engineered for quiet operation, reducing click noise by up to 90% compared to traditional mice.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the mouse. Avoid using harsh chemicals or abrasive materials.
• Storage: When not in use for extended periods, turn off the mouse to conserve battery life. Store it in a cool, dry place.
• Battery Care: Recharge the mouse when the low battery indicator flashes. Avoid fully depleting the battery frequently to prolong its lifespan.

6. Troubleshooting

7. Specifications

8. Warranty and Support

TECKNET provides a 36 Months Warranty for this product (registration may be required). If you encounter any problems during product use, please contact our professional customer service team for assistance.

For support, please visit the official TECKNET website or contact their customer service through the details provided on the product packaging or their website.

Online Resources:

• TECKNET Amazon Store
• TECKNET Support Page (Example)