1. Introduction
Thank you for choosing the Aeitto Nugget Ice Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ice machine. Please read it thoroughly before first use and keep it for future reference.
This countertop ice maker is designed to produce up to 55 pounds of chewable nugget ice per day, featuring rapid ice release and a convenient self-cleaning function. Its large water tank and ice basket capacity ensure a continuous supply of ice for various needs.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic precautions:
- Read all instructions before use.
- Connect to properly grounded outlets only.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from the outlet when not in use, before cleaning, or performing maintenance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Do not use outdoors.
- Ensure proper ventilation around the unit. Maintain a minimum of 5 inches of clearance on all sides.
- Use only potable water.
- The refrigerant used in this appliance is R600a. Handle with care.
3. Product Overview
The Aeitto Nugget Ice Maker (Model ZBJ116) is a compact and efficient appliance designed for home and office use. It produces soft, chewable nugget ice, ideal for various beverages.
Key Components:
- Control Panel: Features indicators for 'Making Ice', 'Ice Full', 'Add Water', 'Clean', and 'Power'.
- Ice Basket: Removable basket with a capacity of 3.2 lbs.
- Water Tank: Large 3.6 L capacity for extended ice production.
- Ice Scoop: Included for convenient serving.
- Drain Plug: Located at the bottom for water drainage.


4. Setup
4.1 Unpacking
Carefully remove the ice maker from its packaging. Inspect the unit for any signs of damage. Remove all packing materials, including any tape or protective films.
4.2 Placement
Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure there is adequate ventilation (at least 5 inches) around the unit for optimal performance.
4.3 Initial Cleaning
Before first use, it is recommended to clean the ice maker. Fill the water tank with clean water and initiate the self-cleaning cycle (refer to Section 6.1). Drain the water after the cycle is complete.
4.4 Filling the Water Tank
Open the lid and pour potable water into the water tank. Do not exceed the maximum fill line. The unit will indicate 'Add Water' when the water level is low.
5. Operating Instructions
5.1 Powering On/Off
Plug the ice maker into a grounded electrical outlet. Press the 'Power' button on the control panel to turn the unit on or off.
5.2 Ice Making Process
Once powered on and with sufficient water, the 'Making Ice' indicator will illuminate. The unit will begin producing nugget ice, with rapid ice release in approximately 5 minutes. The ice maker operates on an automatic continuous cycle.


5.3 Indicator Lights
- Making Ice: Illuminates when the unit is actively producing ice.
- Ice Full: Illuminates when the ice basket is full. The unit will pause ice production until ice is removed.
- Add Water: Illuminates when the water tank needs refilling. The unit will pause ice production until water is added.
Note: This ice maker does not have a refrigeration function for storing ice long-term. It is recommended to transfer ice to a freezer for storage.


6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your ice maker.
6.1 Self-Cleaning Function
To activate the self-cleaning cycle, fill the water tank with clean water and press and hold the 'Clean' button for 3 seconds. The unit will perform an internal cleaning cycle. After the cycle, drain the water.

6.2 Regular Cleaning
- Internal: For thorough cleaning, especially to remove limescale, use a descaling solution or a mixture of water and vinegar. Run the self-cleaning cycle with the solution, then rinse thoroughly by running several cycles with clean water.
- External: Wipe the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ice Basket & Scoop: Wash with mild soap and water, then rinse and dry thoroughly.
6.3 Draining Water
To drain the water from the unit, locate the drain plug at the bottom of the ice maker. Place a container beneath the plug, then remove the plug to allow water to drain completely. Reinsert the plug firmly after draining.
7. Troubleshooting
If you encounter issues with your ice maker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice. | No water in tank; 'Add Water' light on. | Fill the water tank with potable water. |
| Ice basket full; 'Ice Full' light on. | Remove ice from the basket. | |
| Unit not plugged in or power off. | Ensure the unit is plugged in and powered on. | |
| Ice production is slow. | High ambient temperature. | Place the ice maker in a cooler environment. |
| Poor ventilation. | Ensure adequate clearance around the unit. | |
| Unusual noise during operation. | Unit not level. | Adjust the unit to a level surface. |
| Air trapped in the system. | This is normal during initial operation; it should subside. |
If problems persist, please contact Aeitto customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | ZBJ116 |
| Product Dimensions (D x W x H) | 16.9" x 9.84" x 16.9" |
| Weight | 32.6 Pounds |
| Ice Production Capacity | Up to 55 lbs/day |
| Water Tank Capacity | 3.6 Liters |
| Ice Basket Capacity | 3.2 lbs |
| Refrigerant | R600a |
9. Warranty and Support
Your Aeitto Nugget Ice Maker is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for detailed terms and conditions. For technical assistance, troubleshooting, or warranty claims, please contact Aeitto customer support.
Contact Information: Please refer to the contact details provided in your product documentation or visit the official Aeitto website.