1. Introduction and Overview
This manual provides essential information for the safe and efficient operation of your Gyroor KS2 Kids Electric Scooter. Please read it thoroughly before first use and retain it for future reference. The Gyroor KS2 is designed for children aged 6-12, featuring a safe maximum speed, adjustable handlebar, and vibrant LED lights for an engaging riding experience.
Image 1: The Gyroor KS2 Kids Electric Scooter, showcasing its sleek design and LED lighting capabilities.
2. Safety Information
Your safety and the safety of others are paramount. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads, when operating the scooter. Adult supervision is recommended, especially for younger riders.
- UL2272 Certified: The scooter is UL2272 certified, ensuring compliance with electrical safety standards.
- Safe Speed: The maximum speed is limited to 5 MPH, suitable for young riders.
- Smart Start: The motor engages only after the scooter reaches 2 MPH, preventing accidental acceleration.
- Rear Fender Brake: Provides intuitive and reliable stopping power.
- Wide Tires & Low Deck: Designed for enhanced stability and balance.
Image 2: Children enjoying their Gyroor KS2 scooters, highlighting the importance of safety gear.
3. Package Contents
Upon unboxing, please verify that all components are present:
- Gyroor KS2 Electric Scooter (x1)
- Instruction Manual (x1)
- Charger (x1)
- Assembly Tools (Allen wrenches)
4. Assembly
The Gyroor KS2 scooter requires minimal assembly. Follow these steps to prepare your scooter for use:
- Unfold the Scooter: Gently push down on the folding lever located near the base of the handlebar stem to release the folded position. Raise the handlebar stem until it locks into place.
- Attach the Handlebar: Insert the handlebar into the top of the stem. Align the holes and secure it using the provided screw and Allen wrench. Ensure it is tightened firmly.
- Adjust Handlebar Height: Loosen the quick-release clamp on the handlebar stem. Press the small button on the stem and slide the handlebar to one of the two available height settings (29.5" or 33.5"). Release the button to lock it in place and re-tighten the quick-release clamp.
- Deploy Kickstand: Locate the kickstand on the side of the deck and push it down to support the scooter.
Video 1: A demonstration of the Gyroor KS2 scooter's assembly process and key features.
Image 3: The adjustable handlebar feature, allowing the scooter to grow with your child.
5. Operating Instructions
Familiarize yourself with the scooter's controls before riding.
5.1 Powering On/Off
- To Power On: Press and hold the power button on the handlebar display for approximately 3 seconds until the display illuminates.
- To Power Off: Press and hold the power button for approximately 3 seconds until the display turns off.
5.2 Speed Modes
The scooter features different speed modes, indicated on the LED display:
- Gear E (Economy): Maximum speed of 5 MPH.
- Gear N (Normal): Maximum speed of 8 MPH.
- Gear S (Sport): Maximum speed of 10 MPH.
To switch between speed modes, briefly press the power button while the scooter is on.
5.3 Foot Sensor Start
The Gyroor KS2 uses a smart foot sensor start. To engage the motor, place one foot on the deck and push off with the other foot to reach a speed of at least 2 MPH. The motor will then activate, maintaining a constant speed based on the selected gear.
Image 4: Illustration of the foot sensor start mechanism on the scooter's deck.
5.4 Braking
To stop the scooter, simply step down on the rear fender brake with your foot. The LED lights on the side of the deck will illuminate red to indicate braking, enhancing visibility.
Image 5: Close-up of the rear fender brake and the illuminated LED lights during braking.
5.5 LED Lights
The scooter features integrated LED lights on the deck and wheels. To turn the lights on or off, press and hold the light button located on the handlebar display.
6. Charging
Ensure the scooter is fully charged before each use for optimal performance.
- Charging Port: The charging port is located on the right side of the scooter's deck, covered by a protective cap.
- Charging Process: Open the protective cap and insert the charger cable. Plug the charger into a standard wall outlet. The indicator light on the charger will typically show red during charging and turn green when fully charged.
- Charging Time: A full charge from empty takes approximately 2 hours.
- Battery Indicator: The handlebar LED display shows the current battery level with four bars.
Image 6: Location of the charging port and how to connect the charger.
7. Maintenance
Regular maintenance helps prolong the life of your scooter.
- Cleaning: Wipe the scooter with a damp cloth. Avoid using harsh chemicals or excessive water.
- Tire Inspection: Periodically check the tires for wear and tear. Ensure they are free from punctures or damage.
- Fastener Check: Regularly inspect all screws and fasteners to ensure they are tight.
- Storage: Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
8. Troubleshooting
If you encounter any issues, refer to the following common troubleshooting tips:
- Scooter not turning on: Ensure the battery is charged. Press and hold the power button for 3 seconds.
- Motor not engaging: Confirm the scooter is powered on and you have pushed off to at least 2 MPH to activate the foot sensor start.
- Lights not working: Check if the lights are turned on by pressing and holding the light button. Ensure the battery has sufficient charge.
- Reduced performance: This may indicate a low battery. Charge the scooter fully.
For persistent issues, please contact Gyroor customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | Gyroor |
| Model Name | KS2 |
| Age Range | Youth (6-12 years) |
| Weight Limit | 121 Pounds |
| Item Weight | 9.3 Pounds |
| Max Speed | 5 MPH (Economy), 8 MPH (Normal), 10 MPH (Sport) |
| Handlebar Height | Adjustable (29.5"-33.5") |
| Charging Time | 2 Hours |
| Frame Material | Aluminum |
| Wheel Material | Rubber |
| Wheel Size | 3.99 Inches |
| Brake Style | Rear Braking |
10. Warranty and Support
The Gyroor KS2 Electric Scooter comes with a 1-year parts warranty and a 6-month battery warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact Gyroor customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (KS2) ready when contacting support.
