How do I set up the timer and operating modes on the WILKIEE FS40 pet fountain?

The WILKIEE FS40 pet fountain features a pre-programmed Timed Mode. According to the manual, this mode is designed to deliver a fresh 20-second water cycle every 12 minutes automatically. There is no manual programming required for the duration; you simply select this mode on the device interface.The fountain typically offers three operating modes:Continuous Mode: Steady water flow while plugged in.Smart Sensor Mode: Activates a 15-second stream when a pet is detected within 1.5 meters.Timed Mode: Runs for 20 seconds every 12 minutes.Regarding your missing power cord, the FS40 is often described as a wireless or rechargeable model, but it still requires a USB charging cable or power adapter for operation and charging. Since the manual does not list a specific proprietary part number for the cord, you should contact WILKIEE customer support for a replacement or check if a standard USB-C or DC power cable (depending on your specific unit's port) is compatible. You can usually find contact details on the original product packaging or the official WILKIEE website.

WILKIEE FS40 Pet Fountain Filter Replacement Manual

Product Overview

This manual provides instructions for the WILKIEE FS40 Pet Fountain Replacement Filters. These 6-layer filters are designed to ensure your pet receives clean, fresh water.

Compatible with WILKIEE FS40 pet fountain.
Each kit includes 5 filters and 5 pump sponges, individually sealed for freshness.
Features 6-layer filtration: KDF, activated carbon, ionic resin, maifan stone, tourmaline, coconut activated charcoal, and cotton.
Designed to remove hair, particles, and unpleasant odors for improved water quality.

Image showing a cat drinking from the WILKIEE FS40 pet fountain with an arrow pointing to a filter, indicating compatibility.

The WILKIEE FS40 pet fountain, for which these filters are designed, provides fresh water for pets.

Diagram illustrating the 6-stage filtration layers including KDF, activated carbon, ionic resin, maifan stone, tourmaline, and cotton.

Detailed breakdown of the 6-stage filtration system.

Filter Installation and Replacement

Activating the Filter

Before first use, soak the new filter in water for 5 minutes and rinse it for 30 seconds under cool running water. This activates the filter media and removes any loose carbon dust.

Image showing a hand rinsing a filter under a faucet and another hand placing a filter into the pet fountain.

Step 1: Rinse the filter under cool water for 30 seconds or soak for 5 minutes. Step 2: Install the activated filter into the designated slot in the fountain.

Replacing the Filter and Sponge

Follow these steps to replace the filter and pump sponge:

Turn off the fountain and remove the pump.
Detach the connection pipe from the pump.
Use tweezers to remove the old filter sponge.
Open the pump housing and gently scrub all parts with a soft brush. Do not submerge the electric motor in water.
Reassemble the pump cover.
Insert a new filter sponge.
Connect the water supply tube.
Reinstall the pump in the correct orientation.
Restore power to the fountain.

This video demonstrates the process of disassembling, cleaning, and reassembling the water pump and replacing the filter sponge for the WILKIEE FS40 pet fountain.

Operating Modes

The WILKIEE FS40 pet fountain offers multiple operating modes to suit your pet's preferences and conserve energy.

Continuous Mode: Provides a steady flow of water when the fountain is plugged in.
Smart Sensor Mode: Uses a 120-degree, 1.5-meter range sensor to activate a 15-second water stream when a pet approaches.
Timed Mode: Delivers a fresh 20-second water cycle every 12 minutes.

Routine Maintenance

Regular maintenance ensures the longevity and optimal performance of your pet fountain and filters.

Replace the filter every 1-2 weeks.
Replace the pump sponge every 1-2 weeks.
Clean all stainless steel components regularly. These parts are dishwasher safe.
Ensure the water level is always between the MIN and MAX indicators.

Diagram showing the pet fountain with labels indicating to replace the sponge and filter every 1-2 weeks.

This diagram illustrates the recommended replacement frequency for the filter and pump sponge: every 1-2 weeks for both.

Product Specifications

Feature	Detail
Item Weight	2.86 ounces (81 Grams)
Item Dimensions (LxWxH)	4.13 x 2.28 x 3.54 inches
Material	Cotton (for filters)
Model Name	FS40-F5
Manufacturer	NEW-BUND TECHNOLOGY CO., LIMITED
Included Components	Cat Water Fountain (filters are for the fountain)
Specific Uses	Cat water fountain filter

Image showing the packing list for the WILKIEE FS40 filters, including dimensions of the filters and sponges.

Contents of the filter replacement kit, including dimensions.

Diagram showing the dimensions of the filter and sponge, indicating length, width, and thickness.

Ensure correct filter size by checking the dimensions provided.

Troubleshooting

Water Flow Issues

No or Weak Flow: Check if the pump is clean and free of debris. Ensure the filter and sponge are not clogged. Verify the water level is above the minimum mark.
Intermittent Flow: In Smart Sensor mode, flow is activated by motion. In Timed mode, flow occurs every 12 minutes. If in Continuous mode and flow is intermittent, check power connection or battery charge.

Noise

Unusual Noise: Ensure the water level is sufficient. Low water levels can cause the pump to make noise. Clean the pump thoroughly as debris can cause blockages and noise.

Warranty and Customer Support

The WILKIEE FS40 Pet Fountain Filters come with a 1-Year Manufacturer Warranty.

For any questions, technical assistance, or warranty claims, please contact WILKIEE's dedicated service team. Refer to the product packaging or official website for contact details.

WILKIEE FS40