Garvee Electric Cordless Snow Blower User Manual

1. Introduction

Thank you for choosing the Garvee Electric Cordless Snow Blower. This manual provides essential information for the safe assembly, operation, and maintenance of your new snow blower. Please read it thoroughly before use and keep it for future reference.

This powerful cordless snow blower features a brushless motor, a 20-inch clearing width, 10-inch clearing depth, and a 180-degree rotating chute for efficient snow removal from walkways and driveways. Dual LED lights ensure visibility during low-light conditions.

2. Important Safety Information

WARNING: Always keep hands and other body parts away from the rotating chute. Do not operate the snow blower if you are tired or under the influence of drugs or alcohol. Store the snow blower in a dry place when not in use.

• Read all instructions carefully before operating the machine.
• Wear appropriate safety gear, including eye protection and non-slip footwear.
• Ensure the work area is clear of debris, rocks, or other objects that could be thrown by the machine.
• Never direct the discharge chute towards people, pets, or property.
• Do not operate the snow blower on steep slopes.
• Always disconnect the battery pack before cleaning, servicing, or when the machine is unattended.
• Keep children and bystanders away from the operating area.
• Use only manufacturer-approved replacement parts and accessories.

3. Package Contents

Verify that all items are present and undamaged upon unpacking:

• Garvee Electric Cordless Snow Blower Unit
• Handle Assembly
• Discharge Chute Assembly
• 2 x 20V 4.0Ah Lithium-Ion Batteries
• Dual Port Battery Charger
• User Manual (this document)
• Assembly Hardware (screws, knobs)

4. Assembly Instructions

Follow these steps to assemble your Garvee Electric Cordless Snow Blower:

4.1. Handle Assembly

1. Attach the lower handle frame to the main unit using the provided knobs. Ensure the frame is securely fastened.
2. Connect the upper handle frame to the lower handle frame, securing it with the remaining knobs.
3. Route the control cables along the handle frame and secure them with the provided clips to prevent snagging.

4.2. Discharge Chute Installation

1. Place the discharge chute base onto the snow blower's discharge opening.
2. Secure the chute base with the provided screws, ensuring a tight fit.
3. Attach the chute deflector to the chute base, using the adjustment knob to allow for 180-degree rotation.

5. Operating Instructions

5.1. Battery Installation and Charging

Your Garvee snow blower is powered by two 20V lithium-ion batteries. Ensure batteries are fully charged before each use.

1. Open the battery compartment covers on the snow blower.
2. Insert the two fully charged 20V batteries into their respective slots until they click into place.
3. Close the battery compartment covers securely.
4. To charge, remove batteries from the snow blower and place them on the dual port charger. The charger indicates charging status and completion. Fast charging takes approximately 1.5 hours.

Video: Battery Installation and Operation

5.2. Starting and Stopping the Snow Blower

1. Ensure batteries are installed and compartment covers are closed.
2. Press and hold the safety lock button on the handle.
3. While holding the safety button, pull the handle bar towards you to engage the motor.
4. To stop, release the handle bar.

5.3. Snow Clearing Operation

The Garvee snow blower is designed to clear snow up to 20 inches wide and 10 inches deep.

• Push the snow blower forward at a comfortable pace. Avoid forcing the machine through heavy snow.
• Adjust the 180-degree rotating chute to direct snow up to 23 feet away, preventing it from accumulating in unwanted areas.
• For optimal performance, clear snow as soon as possible after snowfall.
• Dual LED headlights provide clear visibility for early morning or late evening operation.

Video: Garvee Snow Blower in Action

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your snow blower.

• Cleaning: After each use, remove any snow, ice, or debris from the auger housing, chute, and exterior surfaces. Use a damp cloth for cleaning. Do not use high-pressure water.
• Battery Care: Store batteries in a cool, dry place. Charge them fully before long-term storage and recharge every 3-6 months to maintain battery health.
• Storage: Store the snow blower in a dry, protected area. The handle can be folded for compact storage.
• Inspection: Periodically check all fasteners for tightness. Inspect the auger and scraper blade for wear or damage. Replace worn parts as needed.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information, technical support, or to order replacement parts, please visit the official Garvee website or contact their customer service. Keep your purchase receipt and model number handy for faster service.

Official Garvee Store: Visit the Garvee Store on Amazon