Jetson LX10 Folding Ride-On User Manual

1. Introduction

This manual provides essential information for the safe and effective operation and maintenance of your Jetson LX10 Folding Ride-On. Please read this manual thoroughly before first use and retain it for future reference. The Jetson LX10 is an electric ride-on designed for urban commuting and recreational use, featuring a convenient folding mechanism for portability and storage. This product is UL-2272 certified.

2. Safety Information

WARNING! Exercise caution when riding. Adult supervision is required for riders under 12 years of age. This product is not designed for competition, stunting, jumping, or off-road use. Riding can be hazardous. Always wear appropriate protective equipment, including a safety helmet, knee pads, and elbow pads. Always wear shoes. Do not ride at night. Follow all local laws and regulations. This product is not to be used in traffic.

For your safety, please read this user manual carefully to ensure you understand and operate the product safely. The user is responsible for any loss or damage caused by improper use. Adults must assist children in the initial assembly and adjustment procedures, including folding/unfolding and handlebar height adjustment. Store the ride-on indoors when not in use.

WARNING! This product can expose you to a chemical such as Cadmium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov/product.

Image: Warning label on the Jetson LX10 Folding Ride-On, detailing safety precautions and Proposition 65 warning.

3. Setup

3.1 Initial Assembly and Adjustments

The Jetson LX10 requires minimal assembly. Adults should assist with initial setup, including unfolding the ride-on and adjusting the handlebar to a comfortable and safe height for the rider. Ensure all locking mechanisms are securely engaged before riding.

3.2 Charging the Battery

The ride-on is equipped with a concealed, rechargeable 36V, 6Ah lithium-ion battery. Before first use, fully charge the battery. Connect the charger to the charging port on the ride-on and then to a standard power outlet. The charging time is approximately up to 4 hours. Only use the charger provided with the product.

4. Operating Instructions

4.1 Powering On/Off

Refer to the specific power button location on your device. Typically, a long press will power the unit on or off.

4.2 Riding the LX10

The Jetson LX10 is an electric ride-on with pegs, meaning no pedaling is required. To accelerate, use the twist throttle located on the handlebar. The ride-on features a 250-watt motor, providing a top speed of 15.5 mph and a range of up to 15 miles on a full charge (actual range may vary based on rider weight and riding conditions).

Image: A close-up view of the twist throttle on the right handlebar of the Jetson LX10, used for acceleration.

4.3 Braking

The LX10 is equipped with hand and disc brakes for effective stopping. Apply the brake levers on the handlebars to slow down or stop. Always brake smoothly and anticipate stops.

Image: A rider's hand is shown engaging the hand brake on the Jetson LX10, highlighting the braking mechanism.

4.4 Lighting

The ride-on features an integrated LED headlight and rear light to enhance visibility and safety, especially in low-light conditions. Ensure these lights are functioning correctly before riding.

Image: A close-up of the front of the Jetson LX10, showing the integrated LED headlight.

4.5 Folding Mechanism

The Jetson LX10 features an easy folding mechanism for convenient storage and transport. To fold, locate the folding latch or lever (refer to the diagram in your quick start guide for exact location) and follow the instructions to collapse the frame. Ensure the mechanism is securely locked when unfolded for riding and when folded for transport.

Image: The Jetson LX10 Folding Ride-On shown in its compact, folded configuration, illustrating its portability.

5. Maintenance

5.1 General Care

• Keep the ride-on clean by wiping it with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Regularly check all nuts, bolts, and fasteners to ensure they are tight.
• Inspect tires for wear and proper inflation. The LX10 uses 10-inch wheels.
• Store the ride-on indoors when not in use to protect it from weather elements.

5.2 Battery Care

• Charge the battery fully after each use to prolong its lifespan.
• If storing for an extended period, charge the battery to approximately 50-70% and recharge every 2-3 months.
• Do not expose the battery to extreme temperatures.

6. Troubleshooting

This section addresses common issues you might encounter with your Jetson LX10. For problems not listed here, please contact customer support.

6.1 Ride-On Does Not Power On

• Ensure the battery is fully charged.
• Check all connections to ensure they are secure.

6.2 Reduced Range or Speed

• Verify the battery is fully charged. Battery performance can decrease over time.
• Rider weight and terrain can affect range and speed. Ensure the rider is within the 260 lb weight limit.
• Check tire pressure. Underinflated tires can reduce efficiency.

6.3 Brakes Not Functioning Properly

• Inspect brake cables for damage or looseness.
• Check disc brake pads for wear.
• If issues persist, professional adjustment may be required.

7. Specifications

8. Warranty and Support

For warranty information, please refer to the manufacturer's official website. Jetson provides support for its products. For further assistance, please visit the Jetson Store on Amazon or consult the contact information provided in your product packaging.