Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your MSI PRO MP243L E14 monitor. Please read this manual thoroughly before using the product to ensure proper and safe operation.
The MSI PRO MP243L E14 is a 24-inch IPS monitor designed for both gaming and office use, featuring a 1920 x 1080 (FHD) resolution, 144Hz refresh rate, Adaptive-Sync, HDR Ready capabilities, and multiple connectivity options including HDMI and VGA ports. It is VESA mountable and offers tilt adjustment for ergonomic comfort.
Safety Information
Always observe the following safety precautions to prevent injury and damage to the monitor:
- Do not expose the monitor to rain or moisture to avoid fire or shock hazards.
- Do not open the monitor casing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Ensure the power cord is properly grounded and connected to a compatible power outlet.
- Avoid placing the monitor in direct sunlight or near heat sources.
- Use only the power adapter supplied with the monitor.
- Clean the monitor with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.
Package Contents
Verify that all items are present in the package:
- MSI PRO MP243L E14 Monitor
- Monitor Stand (Base and Neck)
- Power Adapter and Power Cord
- HDMI Cable
- User Manual (this document)
- Warranty Card
Setup
Assembling the Stand
- Carefully remove the monitor from its packaging, keeping it protected.
- Attach the stand neck to the monitor panel. Ensure it clicks securely into place or is fastened with screws if applicable (refer to specific model instructions for screw details).
- Attach the stand base to the stand neck. Tighten the thumb screw or screws at the bottom of the base to secure it.
- Place the assembled monitor on a stable, flat surface.
Image: Front view of the MSI PRO MP243L E14 monitor with its stand assembled. The screen displays a vibrant, abstract wallpaper, highlighting the slim bezels and the MSI logo at the bottom center.
Connecting the Monitor
- Power Connection: Connect the power adapter to the monitor's DC-in port, then plug the power cord into a power outlet.
- Video Connection:
- HDMI: Connect one end of the HDMI cable to the monitor's HDMI port and the other end to the HDMI output port on your computer or device.
- VGA: Connect one end of the VGA cable to the monitor's D-Sub (VGA) port and the other end to the VGA output port on your computer or device.
- Audio (Optional): If your device supports audio output via HDMI, the monitor's built-in speakers will play audio. For external speakers or headphones, connect them to your computer's audio output.
Image: Close-up view of the rear ports of the MSI PRO MP243L E14 monitor, showing the HDMI, D-Sub (VGA), and DC-in ports clearly labeled.
VESA Mounting (Optional)
The MSI PRO MP243L E14 supports VESA mounting (100x100mm) for wall mounts or monitor arms. To use VESA mounting:
- Remove the stand from the monitor by pressing the quick-release button or unscrewing the stand if applicable.
- Attach your VESA-compatible mount to the four screw holes on the back of the monitor. Use appropriate screws (M4 x 10mm recommended, check your mount's instructions).
Image: Rear view of the MSI PRO MP243L E14 monitor showing a mini PC mounted directly to its VESA holes, demonstrating its VESA mountability feature.
Operating the Monitor
Power On/Off
Press the power button, usually located on the bottom right or rear of the monitor, to turn it on or off. The power button often doubles as the OSD (On-Screen Display) navigation joystick.
On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. To access and navigate the OSD:
- Press the OSD navigation joystick (often the power button) to open the OSD menu.
- Move the joystick up/down/left/right to navigate through menu options.
- Press the joystick in to select an option or confirm a setting.
- Move the joystick left to go back to the previous menu or exit the OSD.
Key OSD Settings
| Setting Category | Description |
|---|---|
| Brightness/Contrast | Adjust the overall luminance and difference between light and dark areas. |
| Color Temperature | Change the color warmth (e.g., Cool, Normal, Warm, User). |
| Input Source | Manually select between HDMI and VGA inputs. |
| Adaptive-Sync | Enable or disable Adaptive-Sync for tear-free gaming (requires compatible graphics card). |
| HDR Mode | Activate High Dynamic Range for enhanced contrast and color (if supported by content). |
| Anti-Flicker / Less Blue Light | Enable eye-care features to reduce eye strain. |
| Eye-Q Check | Utilize the built-in eye self-check feature. |
Image: The MSI PRO MP243L E14 monitor displaying an on-screen menu with various image adjustment options, demonstrating its user interface for settings control.
Image: Two individuals interacting with the MSI PRO MP243L E14 monitor, which displays a dashboard with charts and data. Icons for Eye-Q Check and EyesErgo are visible, indicating eye-care features.
Maintenance
Cleaning the Monitor
- Always unplug the monitor from the power outlet before cleaning.
- Use a soft, lint-free cloth to gently wipe the screen and casing.
- For stubborn marks, slightly dampen the cloth with water or a non-abrasive, monitor-safe cleaning solution. Do not spray liquid directly onto the screen.
- Avoid using benzene, thinner, ammonia-based cleaners, or abrasive materials, as these can damage the surface.
Storage
If storing the monitor for an extended period, disconnect all cables and store it in a cool, dry place, preferably in its original packaging to protect it from dust and physical damage.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| No image on screen |
|
| Image is blurry or distorted |
|
| No sound from speakers |
|
| Screen flickering |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | MSI PRO MP243L E14 |
| Panel Size | 23.8 inches |
| Panel Type | IPS |
| Resolution | 1920 x 1080 (FHD) |
| Aspect Ratio | 16:9 |
| Refresh Rate | 144Hz |
| Response Time | 1ms (MPRT) |
| Display Surface | Matte |
| Video Ports | 1x HDMI (1.4b), 1x D-Sub (VGA) |
| VESA Mounting | 100 x 100 mm |
| Tilt Adjustment | -5° ~ 20° |
| Dimensions (W x H x D) | 21.34 x 15.65 x 7.13 inches (with stand) |
| Weight | 10.1 Pounds (with stand) |
| Features | Adaptive-Sync, HDR Ready, MSI EyesErgo, Anti-Flicker, Less Blue Light, Eye-Q Check, TÜV Certified |
Image: A graphic summarizing key specifications of the MSI PRO MP243L E14 monitor, including 24" screen size, FHD resolution, 144Hz refresh rate, 1ms response time, IPS wide view angle, EyesErgo, Less Blue Light, and MSI Power Link.
Image: A split image showing a close-up of the monitor's HDMI, D-Sub (VGA), and DC-in ports on the left, and a list of key specifications for the PRO MP243L E14 on the right, including panel size, type, resolution, refresh rate, and response time.
Warranty and Support
MSI provides a limited warranty for the PRO MP243L E14 monitor. Please refer to the included warranty card for specific terms and conditions, including warranty period and coverage details.
For technical support, driver downloads, or further assistance, please visit the official MSI support website:
You may also contact MSI customer service directly for inquiries related to your product.
Additional Features
144Hz Refresh Rate and Adaptive-Sync
The monitor's 144Hz refresh rate provides smoother motion and reduced input lag, particularly beneficial for fast-paced content and gaming. When paired with a compatible graphics card, Adaptive-Sync technology synchronizes the monitor's refresh rate with the GPU's frame rate, eliminating screen tearing and stuttering for a fluid visual experience.
Image: The MSI PRO MP243L E14 monitor displaying a racing game scene with a car on a city road, emphasizing its "144Hz Game Ready" feature for smooth visuals.
EyesErgo and Eye-Q Check
MSI EyesErgo technology incorporates Anti-Flicker and Less Blue Light features to reduce eye strain during prolonged use. The TÜV certified display ensures visual comfort. The Eye-Q Check feature provides a self-check mechanism to remind users to take breaks and assess their eye health.
Image: The MSI PRO MP243L E14 monitor displaying a crosshair pattern for the Eye-Q Check feature, designed to help users self-assess their vision and remind them to rest.
Ergonomic Design
The monitor features a tilt-adjustable stand, allowing users to find a comfortable viewing angle (-5° to 20°). This ergonomic flexibility helps reduce neck and eye strain during long work or gaming sessions.
Image: A side profile view of the MSI PRO MP243L E14 monitor illustrating its tilt adjustment range from -5° to 20°.
Accessory Slot
The monitor stand includes a convenient accessory slot, ideal for holding a smartphone or other small devices, keeping your workspace organized.
Image: The MSI PRO MP243L E14 monitor on a desk, with a smartphone placed in the accessory slot on its stand, demonstrating the convenience of this feature.
