Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DieseRC Wireless Light Switch Remote Receiver Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The DieseRC Wireless Light Switch Remote Receiver Kit offers a convenient solution for controlling lighting and other electrical devices without the need for complex wiring. Utilizing 433Mhz RF technology, it provides stable and reliable performance with a strong signal range.
What's in the Box
- 1 x Wireless Receiver Module
- 1 x Wireless Wall Switch (Transmitter)
- AAA Batteries (for transmitter)
- Double-sided adhesive tape
- Mounting Screws
Image: The complete DieseRC Wireless Light Switch Remote Receiver Kit, showing the wall switch and the compact receiver module.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | Switch: 4.53 x 1.77 x 0.98 inches; Receiver: 1.85 x 1.1 x 0.87 inches (47 x 28 x 22 mm) |
| Operating Voltage | AC 85V~250V (110V/120V/220V/240V compatible) |
| Current Rating | 10 Amps (Max Load 1500W) |
| Operation Mode | ON-OFF |
| Switch Type | Push Button |
| Wireless Frequency | 433Mhz RF |
| RF Range | Up to 100FT (open area) |
| Transmitter Battery | AAA (included), replaceable, approx. 5-year lifespan |
| Material | Plastic |
| Learning Code | EV1527 |
Image: Detailed dimensions of both the wireless wall switch and the receiver module, along with included accessories like batteries, double-sided tape, and screws.
Safety Information
- Always disconnect power at the circuit breaker before installing or servicing any electrical components.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- Ensure the receiver's maximum load capacity (10A, 1500W) is not exceeded.
- Do not expose the device to moisture or extreme temperatures.
- Keep out of reach of children.
Setup and Installation
1. Receiver Module Installation
- Disconnect Power: Turn off the main power supply to the circuit at the breaker before beginning installation.
- Connect Wiring: The receiver module is designed to be installed between the power supply and the device (e.g., light fixture, fan).
- Connect the Live (L) and Neutral (N) input wires from your power source to the "INPUT L" and "INPUT N" terminals on the receiver.
- Connect the Live (L) and Neutral (N) output wires to your device (e.g., light bulb) to the "OUTPUT L" and "OUTPUT N" terminals on the receiver.
- Secure Receiver: The mini size of the receiver (1.85 × 1.1 × 0.87 inches) allows it to be easily hidden in most electrical boxes or junction boxes. You can also use screws to fix it onto a board if needed.
- Antenna Placement: The receiver has an antenna. For stronger signal reception, ensure the antenna is not completely enclosed by metal and can be stretched out if possible.
- Restore Power: Once connections are secure, restore power at the circuit breaker.
Image: A clear wiring diagram illustrating how to connect the receiver module between the AC power input and the light fixture. It also shows the receiver installed within a junction box.
Image: Demonstrates the compact size of the receiver module and its typical installation within a ceiling light fixture, highlighting its ability to fit into tight spaces.
2. Wireless Wall Switch (Transmitter) Installation
- Battery Installation: The switch requires AAA batteries (included). Open the back cover of the switch to insert the batteries.
- Mounting: The wireless switch can be fixed to a wall or any flat surface using the provided double-sided adhesive tape or screws. No wiring is required for the switch itself.
Image: Step-by-step visual guide for installing the wireless wall switch, including battery placement and mounting options using screws or adhesive tape.
Operating Instructions
1. Pairing the Switch with the Receiver (Toggle Mode)
The kit usually comes pre-paired. If re-pairing is needed or you are adding additional switches:
- Reset Receiver (Optional): To clear all previous pairings, press the learning button on the receiver 8 times. The indicator light will flash to confirm. After resetting, no remote control will work until re-paired.
- Enter Learning Mode: Press the learning button on the receiver 3 times. The indicator light will turn on, indicating it's ready to pair.
- Pair ON Function: Press the "ON" button on your wireless wall switch once. The receiver's indicator light will flash, confirming the ON function is paired.
- Pair OFF Function: Press the "OFF" button on your wireless wall switch once. The receiver's indicator light will flash again, confirming the OFF function is paired.
- Test: Press the ON/OFF buttons on the switch to verify control over the connected device.
Image: Visual guide demonstrating how to pair the wireless switch with the receiver (toggle mode) by pressing the learning button 3 times, then pressing ON and OFF on the switch. Also shows how to reset the receiver by pressing the learning button 8 times.
2. Basic Operation
- Press the "ON" button on the wireless wall switch to turn on the connected device.
- Press the "OFF" button on the wireless wall switch to turn off the connected device.
Each receiver can store approximately 10 wireless switches, allowing multiple switches to control one device. Conversely, one transmitter can control multiple receivers.
Image: Illustrates the flexibility of the system, showing how multiple wireless switches can control a single lamp, and how one wireless switch can control multiple lamps.
3. Product Demonstration Video
Video: A demonstration of the DieseRC wireless light switch in action, showing its ease of use and installation. It covers basic operation, battery installation, and wiring examples.
Maintenance
- Cleaning: Wipe the switch and receiver with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: The AAA battery in the wireless switch has an estimated lifespan of 5 years. Replace the battery when the switch's indicator light no longer illuminates or its response becomes inconsistent. To replace, carefully open the back cover of the switch.
- Relay Lifespan: The receiver's relay is designed for over 400,000 operations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not respond to switch. |
|
|
| Intermittent control. |
|
|
| Switch indicator light does not illuminate. | Dead battery. | Replace AAA battery in the wireless switch. |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact DieseRC customer service directly. Contact details are typically available on the manufacturer's official website or through your purchase platform.
DieseRC is committed to providing reliable products and customer satisfaction. If you encounter any issues not covered in this manual, please reach out to our support team for assistance.
