Introduction
Thank you for purchasing the EGLO Pogliola LED Ceiling Light, Model 75901. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.
This round LED ceiling light features a white steel panel and a white plastic cover with a starry sky effect. It is designed for versatile use as both a ceiling and wall light, offering adjustable color temperature via a dip switch.
Figure 1: Overview of the EGLO Pogliola LED Ceiling Light, showcasing its elegant design and starry effect.
Safety Information
- Electrical Safety: Always disconnect power at the main circuit breaker before installation, maintenance, or cleaning.
- Qualified Electrician: Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Voltage: Ensure the supply voltage matches the requirements specified on the product label.
- Handling: Handle the fixture with care to avoid damage. Do not modify the product in any way.
- Environment: This fixture is designed for indoor use only. Do not expose to moisture or extreme temperatures.
Setup and Installation
Follow these steps for proper installation of your EGLO Pogliola LED Ceiling Light:
- Prepare for Installation:
- Turn off the main power supply at the circuit breaker.
- Unpack the fixture and inspect for any damage.
- Gather necessary tools (screwdriver, wire strippers, drill if needed).
- Select Color Temperature (Dip Switch):
Before mounting, locate the dip switch on the back of the ceiling panel. Use this switch to select your desired light color temperature:
- 3000 Kelvin: Warm white for a cozy atmosphere.
- 4000 Kelvin: Neutral white for clear, functional light.
- 6500 Kelvin: Cool white for an invigorating ambiance.
Figure 2: LED features and Dip Switch settings. The image highlights the high energy efficiency of the LED and the three selectable color temperatures (3000K, 4000K, 6500K) via a DIP switch.
- Mount the Fixture:
- Attach the mounting bracket to the ceiling or wall using appropriate screws and anchors.
- Connect the electrical wires (live, neutral, ground) from the ceiling/wall to the fixture's terminals according to local wiring codes. Ensure connections are secure.
- Secure the light fixture to the mounting bracket.
Figure 3: EGLO Pogliola LED ceiling light installed, showcasing its appearance and illumination in a room setting.
Figure 4: Detailed view of the light's starry sky effect and flat profile, illustrating its dual functionality as a ceiling or wall light.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Operating Instructions
The EGLO Pogliola LED Ceiling Light operates via a standard wall switch. Once installed and power is restored, simply use your existing light switch to turn the fixture on or off.
The selected color temperature (3000K, 4000K, or 6500K) via the dip switch will remain active until manually changed again (requires power disconnection and access to the dip switch).
Maintenance
To ensure the longevity and optimal performance of your EGLO Pogliola LED Ceiling Light, follow these maintenance guidelines:
- Cleaning:
- Always turn off power before cleaning.
- Wipe the fixture with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- LEDs: The integrated LED light source is designed for long-term use and is not user-replaceable.
- Inspection: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.
Troubleshooting
If you encounter issues with your EGLO Pogliola LED Ceiling Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Ensure all wiring connections are secure. Test the wall switch. |
| Light flickers. | Loose wiring connection; incompatible dimmer switch (if applicable). | Turn off power and check wiring connections. Ensure the fixture is not connected to an incompatible dimmer. |
| Incorrect color temperature. | Dip switch set incorrectly. | Turn off power, access the dip switch on the back of the fixture, and adjust to the desired setting (3000K, 4000K, or 6500K). |
If the problem persists after attempting these solutions, please contact customer support or a qualified electrician.
Specifications
| Brand | EGLO |
| Model Number | 75901 |
| Product Dimensions | 31 cm (Diameter) x 6 cm (Height) |
| Weight | 400 grams |
| Color | White |
| Power Source | Corded Electric |
| Wattage | 18 Watts |
| Luminous Flux | 2100 Lumens |
| Color Temperature Options | 3000K (Warm White), 4000K (Neutral White), 6500K (Cool White) |
| Number of Light Sources | 1 (Integrated LED) |
| Material | Metal (panel), Plastic (cover) |
| Special Feature | Dip Switch for Color Temperature Selection, Starry Sky Effect |
Figure 5: Product dimensions, indicating a diameter of 31 cm.
Warranty and Support
Warranty information for the EGLO Pogliola LED Ceiling Light is typically provided with the product packaging or can be obtained directly from the manufacturer, EGLO. Please refer to your purchase documentation for specific warranty terms and conditions.
For technical support, spare parts, or further assistance, please contact EGLO customer service through their official website or the retailer where the product was purchased.
