1. Introduction
Thank you for choosing the EGLO Moschella LED Ceiling Lamp. This manual provides essential information for the proper and safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.
2. Safety Instructions
- Always disconnect the power supply before installation, maintenance, or cleaning.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the mounting surface can support the weight of the fixture.
- Do not modify the fixture in any way. Unauthorized modifications may void the warranty and create safety hazards.
- This product is designed for indoor use only.
- Avoid direct contact with the LED light source when the fixture is powered on, as it may be hot.
3. Package Contents
Please check that all components are present and undamaged before installation.
- EGLO Moschella LED Ceiling Lamp (Model 902148)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
Image 3.1: Packaging of the EGLO Moschella LED Ceiling Lamp, showing product dimensions and technical specifications.
4. Installation Guide
4.1 Pre-Installation
- Turn off the main power supply at the circuit breaker before starting any electrical work.
- Unpack the fixture and inspect it for any damage.
4.2 Adjusting Color Temperature (Dip Switch)
The EGLO Moschella LED Ceiling Lamp features a convenient Dip Switch on the back of the fixture, allowing you to select your preferred light color temperature before mounting. This switch must be set prior to installation.
- Locate the Dip Switch on the rear side of the lamp.
- Select between Warm White (2700 Kelvin / 1170 lumens) for a cozy atmosphere or Cool White (6500 Kelvin / 1150 lumens) for a more invigorating and functional light.
- Ensure the switch is firmly in the desired position.
Image 4.1: The EGLO Moschella LED Ceiling Lamp. The Dip Switch is located on the rear of the central mounting base.
4.3 Mounting and Wiring
- Mark the drilling points on the ceiling using the lamp's mounting bracket as a template.
- Drill holes and insert appropriate wall plugs (if necessary).
- Connect the electrical wires from the ceiling to the terminal block on the lamp. Ensure correct polarity (Live, Neutral, Earth).
- Secure the mounting bracket to the ceiling using the provided screws.
- Attach the lamp fixture to the mounting bracket, ensuring it is securely fastened.
- Restore power at the circuit breaker and test the light.
Image 4.2: The EGLO Moschella LED Ceiling Lamp installed on a ceiling, demonstrating its aesthetic integration into a room.
5. Operating Instructions
Once installed and powered, the EGLO Moschella LED Ceiling Lamp operates via your standard wall light switch. The selected color temperature (Warm White or Cool White) will remain active until manually changed using the Dip Switch (requires power disconnection and re-accessing the switch).
6. Maintenance
6.1 Cleaning
- Ensure the power is off and the fixture is cool before cleaning.
- Wipe the fixture with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
6.2 LED Light Source
The LED light source in this fixture is designed for long-term use and is not user-replaceable. If the LED light source fails, the entire fixture may need to be serviced or replaced. Contact EGLO customer support for assistance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring Faulty switch | Check circuit breaker and wall switch. Verify wiring connections (ensure power is off). Test the wall switch. |
| Light flickers | Loose wiring Incompatible dimmer (if applicable) | Check wiring connections (ensure power is off). This fixture is not specified as dimmable. Do not use with a dimmer unless explicitly stated by EGLO. |
| Incorrect light color | Dip Switch set incorrectly | Disconnect power, access the Dip Switch on the back of the fixture, and adjust to the desired setting (Warm White or Cool White). |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 902148 |
| Brand | EGLO |
| Material | Metal, Plastic |
| Color | Black, White |
| Power Source | Corded Electric |
| Wattage | 9.7 Watts |
| Bulb Type | Integrated LED |
| Color Temperature (selectable) | 2700K (Warm White) / 6500K (Cool White) |
| Luminous Flux | 1170 lumens (2700K) / 1150 lumens (6500K) |
| Dimensions (L x W x H) | 37.5 cm x 37.5 cm x 4 cm |
| Weight | 500 g |
| Energy Efficiency Class | E |
| Special Features | Dip Switch for color temperature selection |
| Intended Use | Indoor (Living Room, Bedroom, Hallway, Office, Kitchen) |
9. Warranty and Support
EGLO products are manufactured to high-quality standards. For information regarding the manufacturer's warranty, please refer to the documentation provided with your purchase or visit the official EGLO website. If you encounter any issues or require technical assistance, please contact EGLO customer support or your retailer.
Extended warranty options may be available from third-party providers, such as Assurant, as offered at the point of purchase. These extended warranties are separate from the manufacturer's warranty and cover additional terms and durations.
10. Disposal
This product contains electronic components and should not be disposed of with regular household waste. Please dispose of it at an authorized collection point for electrical and electronic equipment recycling in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.
