VTOMAN V10 Pro 4500A Jump Starter Instruction Manual

1. Introduction

The VTOMAN V10 Pro 4500A Jump Starter is a powerful and versatile device designed to provide reliable jump-starting for a wide range of 12V vehicles, including all gasoline and up to 10.0L diesel engines. Beyond its primary function, it also serves as a portable power bank for charging electronic devices and features a multi-mode LED flashlight for emergencies. This manual provides essential information for safe and effective use of your V10 Pro Jump Starter.

Figure 1: VTOMAN V10 Pro 4500A Jump Starter

2. What's in the Box

Carefully unpack all items and ensure you have received the following components:

• 1 x V10 Pro Jump Starter Unit
• 1 x Smart Jumper Cable with Indicator
• 1 x USB-A to Type-C Cable
• 1 x Type-C to Type-C Cable
• 1 x Storage Case
• 1 x User Manual

Figure 2: Package Contents

3. Product Features

• High Starting Power: Genuine 4500 Amps peak current, capable of jump starting all 12V gasoline engines and up to 10.0L diesel engines.
• Versatile Power Bank: Equipped with USB-C/PD15W, dual USB-A/Quick Charging outputs, and 15V/10A DC output for charging various electronic devices and powering car accessories.
• Advanced Safety: Features 10 advanced safety technologies including spark-proof, reverse-charge, over-current, over-charge, reverse-polarity, high-temp, low-temp, short-circuit, over-voltage, and over-load protection.
• Extreme Weather Operation: Designed to operate effectively in temperatures ranging from -4°F to 140°F (-20°C to 60°C).
• Long Standby Time: Automatically powers down after 10 seconds of inactivity, preserving power for up to 24 months on a single charge.
• Integrated LED Flashlight: 400 lumen LED light with 3 modes: Normal, Strobe, and SOS for emergency signaling.
• Portable Design: Compact and comes with a sturdy storage case for easy transport and storage.

Figure 3: Wide Vehicle Compatibility

4. Setup

4.1 Charging the Jump Starter

Before first use, fully charge the VTOMAN V10 Pro. It can be charged using the provided USB-C cable via a wall charger (not included) or in your car. A full charge typically takes about 5 hours.

• Connect the Type-C cable to the IN/OUT (5V/3A 15W) port on the jump starter.
• Connect the other end of the cable to a USB wall adapter or a car charger.
• The battery indicator lights will illuminate to show the charging progress. All four lights indicate a full charge.

Figure 4: Charging at Home

Figure 5: Charging in Car

5. Operating Instructions

5.1 Jump Starting a Vehicle

Ensure the jump starter is fully charged before attempting to jump start a vehicle.

1. Connect Smart Jumper Cable: Insert the blue end of the smart jumper cable into the jump start socket on the V10 Pro.
2. Connect to Vehicle Battery: Attach the red clamp to the positive (+) terminal of the vehicle battery and the black clamp to the negative (-) terminal.
3. Check LED Indicator: Observe the LED indicator on the smart jumper cable:
• Solid Green LED: Connection is correct. Proceed to start the vehicle.
• Red LED: Reverse connection. Correct the polarity of the battery clamps.
• Blinking Green LED: Vehicle battery voltage is too low. Press the "BOOST" button on the smart cable. Once the Green LED illuminates solid, start the vehicle within 30 seconds.
• No Light: Vehicle battery may be damaged. First, ensure correct connection. Try pressing the "BOOST" button. If Green LED illuminates solid, start the vehicle within 30 seconds.
4. Start Vehicle: Once the LED is solid green, start your vehicle.
5. Disconnect: After the vehicle starts, disconnect the smart jumper cable from the vehicle battery first, then from the jump starter.

Figure 6: Regular Jump Start Mode

Figure 7: Boost Mode for Totally Dead Batteries

5.2 Using as a Power Bank

The V10 Pro can charge various electronic devices:

• Connect your device's charging cable to one of the USB-A (Quick Charging or 5V/2.4A) outputs or the USB-C (IN/OUT 5V/3A 15W) port.
• For 15V/10A DC output, use a compatible cable to power car refrigerators, air compressors, etc.

Figure 8: Charging Multiple Devices

5.3 Using the LED Flashlight

The built-in 400 lumen LED flashlight has three modes:

• Normal: Press and hold the power button for 3 seconds to turn on.
• Strobe: Press the power button once more to activate strobe mode.
• SOS: Press the power button again to activate SOS signaling mode.
• To turn off, press the power button one more time or hold it for 3 seconds.

Figure 9: LED Flashlight Modes

6. Safety Information

The VTOMAN V10 Pro incorporates 10 advanced safety technologies to ensure user protection and prevent damage to the device or vehicle:

• Spark-Proof Protection: Prevents sparks during connection.
• Reverse-Charge Protection: Prevents current from flowing back into the jump starter.
• Over-Current Protection: Safeguards against excessive current flow.
• Over-Charge Protection: Prevents battery overcharging.
• Reverse-Polarity Protection: Alerts and protects against incorrect clamp connections.
• High-Temperature Protection: Shuts down if internal temperature exceeds safe limits.
• Low-Temperature Protection: Ensures safe operation in cold conditions.
• Short-Circuit Protection: Prevents damage from short circuits.
• Over-Voltage Protection: Protects against excessive voltage.
• Over-Load Protection: Prevents damage from drawing too much power.

Figure 10: Advanced Safety Technologies

7. Maintenance

To ensure the longevity and optimal performance of your VTOMAN V10 Pro Jump Starter:

• Store the unit in its provided storage case when not in use.
• Recharge the unit periodically, even if not used, to maintain battery health. The unit has a 24-month long standby time, but regular checks are recommended.
• Keep the unit clean and dry. Avoid exposure to extreme moisture or direct sunlight for prolonged periods.

Figure 11: 24-Month Standby Time

8. Troubleshooting

Refer to the LED indicator on the smart jumper cable for common issues:

9. Specifications

10. Warranty and Support

The VTOMAN V10 Pro Jump Starter comes with an 18-month warranty and lifetime technical support. For any questions or assistance, please contact our dedicated customer service team.

Contact Information:

• Email: support@vtoman.com

Additional support resources may be available on the official VTOMAN website.