Introduction
This manual provides instructions for the proper installation, use, and maintenance of your BoxWave ClearTouch Crystal ToughShield 9H Screen Protector. Designed specifically for the Blaupunkt BP260PLAY, this screen protector offers robust protection against scratches, impacts, and daily wear while maintaining optical clarity and touch sensitivity.
Image: Blaupunkt BP260PLAY device with the ClearTouch Crystal ToughShield 9H screen protector installed, demonstrating its clear appearance.
Package Contents
Your BoxWave ClearTouch Crystal ToughShield 9H Screen Protector package includes:
- Two (2) BoxWave ClearTouch Crystal ToughShield 9H Screen Protectors
- Installation Accessories (cleaning cloth, dust removal sticker, squeegee card)
Image: Contents of the BoxWave ClearTouch Crystal ToughShield 9H package, including two screen protectors and tools for installation.
Setup: Installation Guide
Follow these steps carefully for optimal installation of your screen protector:
- Prepare Your Workspace: Choose a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the screen.
- Clean the Device Screen: Use the provided cleaning cloth to wipe the Blaupunkt BP260PLAY screen. Ensure all smudges, fingerprints, and debris are removed. For stubborn marks, a screen cleaner (not included) can be used sparingly.
- Remove Dust: Use the dust removal sticker to gently dab the entire screen surface. This will pick up any remaining dust particles. Inspect the screen under light to confirm it is completely dust-free.
- Align the Screen Protector: Carefully peel back a small portion of the protective film labeled '1' from one end of the screen protector. Align the exposed edge of the screen protector with the corresponding edge of your device screen. Pay close attention to cutouts for speakers, cameras, or buttons to ensure a perfect fit.
- Apply the Protector: Once aligned, slowly and steadily lower the screen protector onto the device screen, gradually peeling off the rest of the protective film '1'. As you apply, use the squeegee card to gently push out any air bubbles towards the edges.
- Remove Air Bubbles: If bubbles remain, use the squeegee card to push them towards the nearest edge. For persistent bubbles, you may gently lift the nearest edge of the protector and reapply while squeegeeing.
- Remove Top Film: Once the screen protector is fully adhered and free of bubbles, carefully peel off the top protective film labeled '2' (if present).
- Final Inspection: Perform a final check for any remaining dust or bubbles. The screen protector is now installed and ready for use.
Image: Precision manufacturing ensures the screen protector is designed to fit your device perfectly.
Operating
The BoxWave ClearTouch Crystal ToughShield 9H Screen Protector is designed to be virtually invisible once applied. It maintains the original touch sensitivity and display clarity of your Blaupunkt BP260PLAY. You can operate your device as usual, enjoying full access to all functions, buttons, and ports.
- Touch Sensitivity: The ultra-thin design ensures no interference with your device's touch screen responsiveness.
- Optical Clarity: Experience 99% visibility and vibrant color rendition without distortion.
Image: The screen protector maintains crystal clarity, preserving the vibrancy of your device's display.
Maintenance
To ensure the longevity and performance of your screen protector, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth (like the one provided) to gently wipe the screen protector. For smudges, slightly dampen the cloth with water or a mild, non-abrasive screen cleaner. Avoid harsh chemicals or abrasive materials.
- Avoid Sharp Objects: While the ToughShield 9H offers significant protection, extreme pressure or direct contact with very sharp objects can still cause damage.
- Reusability: The ClearTouch material is designed for reusability. If you need to remove and reapply, ensure the adhesive side remains clean and free of dust.
Image: The 9H ToughShield provides ultimate protection against daily hazards like keys, spills, and minor drops.
Troubleshooting
If you encounter issues during or after installation, consider the following:
- Bubbles: Most small bubbles will disappear within 24-48 hours as the adhesive settles. For larger bubbles, gently lift the nearest edge of the protector and reapply, using the squeegee card to push the air out.
- Dust Particles: If dust is trapped under the protector, carefully lift the nearest corner with a piece of tape. Use another piece of tape to dab and remove the dust particle from both the screen and the adhesive side of the protector. Then reapply.
- Misalignment: If the protector is significantly misaligned, gently peel it off completely, clean the screen and protector adhesive side again, and attempt reinstallation.
Image: The flexible material of the ClearTouch protector helps prevent chipping and cracking.
Specifications
| Feature | Description |
|---|---|
| Material | Polyethylene Terephthalate (PET) |
| Hardness Rating | 9H (ToughShield) |
| Transparency | 99% |
| Surface Finish | Glossy |
| Compatibility | Blaupunkt BP260PLAY |
Warranty Information
For detailed warranty information regarding your BoxWave product, please refer to the official BoxWave website or contact customer support. Warranty terms typically cover manufacturing defects.
Support
If you require further assistance or have questions not covered in this manual, please visit the BoxWave support page or contact their customer service team. Contact information can typically be found on the official BoxWave website.