Product Overview
The FEELNEEDY FN-W18 is a cordless pet water fountain designed to provide fresh, filtered water for multiple pets. It features a durable stainless steel construction, a long-lasting battery, and intelligent operating modes for efficient hydration.
Image: The FEELNEEDY FN-W18 Cordless Stainless Steel Pet Water Fountain, showcasing its sleek design.
Key Features:
- Cordless Design with Radar Sensor: Offers flexible placement and precise motion detection, reducing false triggers and eliminating chewing risks from power cords.
- Three Working Modes: Includes Sensor Mode, Timed Mode, and Continuous Mode to suit various pet hydration needs and conserve energy.
- 5000mAh Long-lasting Battery: Provides up to 60 days of operation on a single charge in sensor/timed mode.
- 270oz/8L Large Capacity: Features a 7L tank and 1L tray, minimizing refill frequency and providing an emergency water reserve.
- 304 Stainless Steel Material: Ensures durability, hygiene, and easy cleaning, including dishwasher compatibility (below 60℃/140℉).
- User-Friendly Design: Incorporates a filter reminder, clear water-level window, ultra-quiet pump (≤45dB), and modular components for simple maintenance.
Setup Instructions
Follow these steps to set up your FEELNEEDY FN-W18 pet water fountain:
- Prepare Components: Unpack all components: the stainless steel container, water tray, filter, and master control module (pump unit).
- Clean Components: Wash the stainless steel container and water tray thoroughly with water and mild soap. Rinse well.
- Install Filter: Place the filter into the designated filter tray slot. Ensure it is seated correctly.
- Assemble Water Tray: Place the water tray onto the stainless steel container.
- Fill with Water: Pour fresh water into the container, ensuring the water level remains below the maximum fill line.
- Insert Control Module: Insert the master control module (pump unit) into the corresponding hollow space in the water tray. Ensure the water outlet faces forward.
- Initial Charge (Optional): While the fountain can be used immediately, it is recommended to fully charge the battery for optimal performance. The pump unit is rechargeable and removable for convenient charging.
Image: Step-by-step diagram illustrating the assembly process of the water fountain.
Image: The pump unit being recharged separately from the fountain, highlighting its removable design.
Operating Modes
The FEELNEEDY FN-W18 offers three distinct operating modes to cater to your pet's drinking habits and optimize energy usage. Select your preferred mode using the control buttons on the master module.
- Sensor Mode:
The water runs for 20 seconds when a pet approaches within a 120° x 2.62ft (80cm) range. This mode is recommended for energy conservation.
- Timed Mode:
The water runs for 15 seconds every 15 minutes, providing regular hydration intervals.
- Continuous Mode:
Water flows continuously. This mode is only available when the fountain is plugged into a power source.
Image: Visual representation of the Sensor, Timed, and Continuous operating modes.
Image: A cat approaching the fountain, demonstrating the radar sensor's detection range.
Maintenance
Regular cleaning and filter replacement are crucial for maintaining water quality and the longevity of your fountain.
Cleaning the Fountain:
- Disassemble: Remove the master control module, water tray, and filter from the stainless steel container.
- Wash Components: Wash the stainless steel container and water tray with water and mild soap. These parts are dishwasher safe (below 60℃/140℉).
- Clean Pump Unit:
- Remove and clean the sponge filter from the pump unit.
- Remove the cover of the pump.
- Remove the cap of the impeller.
- Carefully take out the impeller using the provided tools (tweezers).
- Thoroughly clean all pump parts, including the impeller and the inside of the water pump, using the small brush provided.
- Reassemble: Ensure all parts are dry before reassembling the fountain.
Image: Step-by-step guide for disassembling and cleaning the pump unit.
Image: The fountain disassembled, highlighting its detachable and washable design for easy cleaning.
Filter Replacement:
The fountain features a filter reminder. A red flashing light will indicate when it's time to replace the filter, typically every 14 days. To reset the reminder, press and hold the filter button for 5 seconds after replacing the filter.
Image: Close-up of the control module showing the filter change reminder indicator.
Troubleshooting
If you encounter any issues with your FEELNEEDY FN-W18 water fountain, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or weak flow |
|
|
| Fountain is noisy |
|
|
| Sensor not detecting pets |
|
|
| Filter reminder light not resetting |
|
|
Specifications
| Model Number | FN-W18 |
| Brand | FEELNEEDY |
| Material | 304 Stainless Steel |
| Capacity | 8 Liters (270 oz) |
| Power Source | Battery Powered (5000mAh Lithium-Ion battery included) |
| Battery Life | Up to 60 days (in Sensor/Timed Mode) |
| Product Dimensions | 30.5L x 17.8W x 30.5H Centimetres |
| Item Weight | 1 Kilogram |
| Pet Type Compatibility | Cats, Dogs (Small, Medium, Large breeds) |
| Manufacturer | FEELNEEDY |
| Country of Origin | China |
Image: Infographic detailing key specifications and features of the fountain.
Customer Support
For any further questions, concerns, or assistance with your FEELNEEDY FN-W18 pet water fountain, please contact our customer support team.
You can reach us via Amazon message by clicking on our store name under the "Buy Now" section on the product page, then selecting "Ask a Question". We aim to respond to all inquiries within 24 hours.
