1. Introduction
This manual provides detailed instructions for the installation and operation of your AWESAFE Android 13 Car Radio, designed specifically for Peugeot 208 and 2008 models manufactured between 2012 and 2018. This unit features an 8-inch touchscreen, wireless CarPlay, Android Auto, GPS navigation, Bluetooth, FM/RDS radio, steering wheel control compatibility, and parking assist.
2. Safety Information
- Always ensure the vehicle is parked safely before operating the device.
- Do not attempt to install or service the unit if you are not qualified. Consult a professional for installation to avoid damage to the vehicle or the device.
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
- Keep the screen clean using a soft, dry cloth.
3. Package Contents
Verify that all items are present in the package before proceeding with installation.
- AWESAFE Android 13 Car Radio Unit
- Power Cables
- RCA Cables
- USB Cables (x2)
- GPS Module/Antenna
- External Microphone
- CANBUS Decoder
- Reversing Camera Cable
- Original USB Port Adapter
- Radio Antenna Cable
- Installation Frame
- Pry Tool
- Screwdriver
4. Setup and Installation
Professional installation is highly recommended for this car radio unit to ensure proper functionality and avoid damage to your vehicle's electrical system. The unit is designed to integrate seamlessly with your Peugeot 208/2008 (2012-2018) dashboard.
4.1 Pre-Installation Comparison
Observe the visual difference between the original car radio and the AWESAFE unit after installation. The new unit offers a larger screen and enhanced features while maintaining the original aesthetic.
4.2 Wiring and Connections
- Power Connection: Connect the main power harness to your vehicle's wiring. Ensure correct polarity.
- CANBUS Decoder: Connect the CANBUS decoder to enable steering wheel controls and other vehicle-specific functions.
- GPS Antenna: Connect the GPS antenna and position it in a location with a clear view of the sky for optimal signal reception.
- External Microphone: Plug in the external microphone for improved call quality during Bluetooth hands-free operation.
- USB Cables: Connect the provided USB cables for data transfer and charging.
- Reversing Camera: If applicable, connect the reversing camera cable for parking assist functionality.
5. Operating Instructions
5.1 Wireless CarPlay and Android Auto
The unit supports both wireless and wired CarPlay for iPhone users and Android Auto for Android smartphone users. Access these features via the pre-installed 'Zlink' application.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your smartphone. Open the 'Zlink' app on the car radio and follow the on-screen instructions to pair your device.
- Wired Connection: Connect your smartphone to the car radio using the original USB cable. The 'Zlink' app will automatically detect the connection.
5.2 GPS Navigation
After connecting the GPS antenna, you can download and use various online navigation applications via Wi-Fi. The unit supports popular navigation apps for real-time traffic and route guidance.
- Connect to Wi-Fi: Go to Settings > Network > Wi-Fi and connect to an available network.
- Download Maps: Access the Google Play Store (or similar app store) to download your preferred navigation applications and offline maps if desired.
5.3 Bluetooth Functionality
The integrated Bluetooth allows for hands-free calling and audio streaming from your smartphone.
- Pairing: Enable Bluetooth on your smartphone and search for the car radio device. Select it to pair.
- Hands-Free Calls: Once paired, you can make and receive calls directly from the car radio screen. The external microphone enhances call clarity.
- Audio Streaming: Play music from your smartphone through the car's speakers via Bluetooth.
5.4 FM/RDS Radio
Connect the original car radio antenna to access FM radio stations with RDS (Radio Data System) functionality.
- Automatic Scan: Use the auto-scan function to find and save available radio stations.
- Manual Tuning: Manually tune to specific frequencies.
- RDS: RDS provides additional information such as station name, program type, and traffic announcements where available.
5.5 Steering Wheel Controls (SWC)
The unit is compatible with your vehicle's original steering wheel controls, allowing you to manage audio and calls safely without taking your hands off the wheel.
- Configuration: Access the SWC settings in the car radio's menu to map the buttons on your steering wheel to specific functions (e.g., volume up/down, track skip, answer/end call).
- Learning Function: The system includes a learning function for custom button assignments.
5.6 Built-in DSP (Digital Sound Processor)
The Digital Sound Processor allows you to customize audio settings for an enhanced listening experience.
- Equalizer: Adjust frequency bands to fine-tune the sound output.
- Sound Effects: Choose from various preset sound effects or create your own custom profile.
- Balance/Fader: Adjust the audio balance between speakers.
5.7 Voice Assistant
Utilize the integrated voice assistant for hands-free control of various functions, such as adjusting volume, changing radio stations, or answering calls, enhancing driving safety and convenience.
6. Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to clean the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Do not spray cleaner directly onto the screen.
- Software Updates: Periodically check for software updates via the system settings. Updates can improve performance, add new features, and fix bugs.
- General Care: Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight for extended periods.
7. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Incorrect wiring, blown fuse, power supply issue. | Check power connections and vehicle fuses. Consult a professional if unsure. |
| No sound output | Speaker wiring issues, volume too low, incorrect audio source. | Verify speaker connections, increase volume, select correct audio source. Check DSP settings. |
| GPS signal weak or lost | GPS antenna not properly connected or obstructed. | Ensure GPS antenna is securely connected and placed in a clear location (e.g., dashboard, under windshield). |
| CarPlay/Android Auto not connecting | Bluetooth/Wi-Fi off, incorrect USB cable, 'Zlink' app issue. | Ensure Bluetooth and Wi-Fi are enabled on both devices. Use original USB cable for wired connection. Restart 'Zlink' app or car radio. |
| Steering wheel controls not working | CANBUS not connected, SWC not configured. | Verify CANBUS connection. Go to SWC settings in the car radio and perform the learning function. |
If the problem persists, please contact AWESAFE customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | AWESAFE |
| Model Number | B0FH2HMH67 |
| Compatible Vehicles | Peugeot 208/2008 (2012-2018) |
| Operating System | Android 13 |
| Memory (RAM) | 2GB |
| Storage (ROM) | 64GB |
| Screen Size | 8 Inches |
| Control Method | Touchscreen |
| Connectivity Technology | Bluetooth, Wi-Fi |
| Special Features | Wireless CarPlay, Android Auto, GPS Navigation, FM/RDS Radio, Steering Wheel Control (SWC), Parking Assist, Voice Assistant, Built-in DSP |
| Compatible Devices | Smartphone |
| Audio Output Mode | Stereo |
| Item Weight | 1500 Grams |
| Manufacturer | IBEN STORE |
| UPC | 759973261214 |
| Country of Origin | China |
9. Warranty and Support
Your AWESAFE car radio comes with a two-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
For technical assistance, troubleshooting, or warranty claims, please contact AWESAFE customer support. You can find contact information on the official AWESAFE website or through your purchase platform. AWESAFE offers support through its European service center.