Maxhonor Electric Fireplace with Mantel (Model FS-005-US)

Introduction

Thank you for choosing the Maxhonor Electric Fireplace with Mantel. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your new fireplace. Please read all instructions carefully before use and retain this manual for future reference.

Important Safety Information

• Read all instructions before installing or using this heater.
• This electric fireplace is equipped with an overheat safety device. If the heater overheats, it will automatically shut off.
• Do not cover the heater or block the air vents.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Always unplug the heater when not in use.

Setup and Assembly

Your Maxhonor Electric Fireplace with Mantel is shipped in two separate packages, which may arrive at different times. Please ensure you have received both packages before beginning assembly.

Detailed assembly instructions and labeled accessories are included in the package. Follow the step-by-step guide to assemble your fireplace mantel and insert the electric fireplace unit.

Operating Instructions

Your electric fireplace offers convenient control options via a touch screen panel on the unit and a remote control.

Controls:

• Power: Turns the unit on or off.
• Flame Effect: Adjusts the flame colors (12 options) and brightness levels (5 options).
• Heat Settings: Select between 750W (low) and 1500W (high) power settings. The heating function and flame function can be controlled separately.
• Temperature Control: Adjust the desired room temperature from 62°F to 82°F.
• Timer: Set an automatic shut-off timer for 1 to 8 hours to conserve energy.

Maintenance

To ensure the longevity and optimal performance of your Maxhonor Electric Fireplace, regular cleaning is recommended. The smooth surfaces and design make it easy to dust and wipe clean.

• Always unplug the unit before cleaning.
• Use a soft, damp cloth to clean the exterior surfaces. Avoid abrasive cleaners.
• Gently dust the interior of the fireplace insert as needed.

Troubleshooting

If you encounter any issues with your electric fireplace, please refer to the following common solutions:

• No Power: Ensure the unit is properly plugged into a working electrical outlet. Check the main power switch on the unit.
• Heater Not Working: Verify that the heat function is activated and the desired temperature is set above the current room temperature. Check for any obstructions around the heater vents.
• Overheat Protection: The electric fireplace has an overheat safety device. If the unit becomes too hot, it will automatically shut off. Unplug the unit, allow it to cool down for at least 10 minutes, and then plug it back in. Remove any items that may be blocking the air vents.
• Remote Control Issues: Check the batteries in the remote control. Ensure there are no obstructions between the remote and the fireplace sensor.

If problems persist, please contact Maxhonor customer support for assistance.

Specifications

Warranty and Support

For any questions, concerns, or assistance with your Maxhonor Electric Fireplace, please contact our customer support team. We are committed to providing you with a healthy and safe home environment.

Please refer to your purchase documentation for specific warranty details. If you need more help, please contact us directly.