BESTWAY Lay-Z-Spa Hawaii AirJet Inflatable Hot Tub (Model 6001G) Instruction Manual

Introduction

This manual provides essential instructions for the safe and efficient setup, operation, and maintenance of your BESTWAY Lay-Z-Spa Hawaii AirJet Inflatable Hot Tub, Model 6001G. Please read all instructions carefully before installation and use to ensure proper function and longevity of your product.

Important Safety Information

Always follow basic safety precautions when installing and using this electrical product. Failure to follow these instructions can result in injury or damage to the product.

• Ensure the power supply meets the specified requirements (220-240 V).
• Do not operate the hot tub if the pump or electrical components are damaged.
• Keep children under supervision at all times when near the hot tub.
• Avoid using electrical appliances near the hot tub.
• The hot tub is designed for 4-6 persons. Do not exceed this capacity.
• Maintain proper water chemistry to prevent health risks.
• Always use the thermal cover when the hot tub is not in use to prevent heat loss and keep it clean.
• This product is certified with CE/GS standards.

Package Contents

Verify that all components are present and undamaged before proceeding with setup.

• Inflatable SPA (196 x 71 cm)
• Built-in filter pump
• ChemConnect™ pool chemical dispenser
• Type VI pump filter cartridge
• Thermoactive SPA cover
• Repair patch

Image: The Lay-Z-Spa Hawaii hot tub shown with its thermal cover, a ChemConnect chemical dispenser, and a Type VI filter cartridge.

Setup Instructions

Follow these steps for initial setup of your inflatable hot tub.

1. Site Selection

• Choose a flat, level surface capable of supporting the weight of the filled hot tub (approximately 1,012 kg).
• Ensure the location has access to a suitable power outlet (220-240 V) and is away from sharp objects.
• Provide adequate drainage for water changes.

2. Inflation

• Unfold the hot tub liner on the chosen site.
• Connect the inflation hose from the pump to the hot tub's air valve.
• Turn on the pump's inflation function. Inflate until the walls are firm to the touch but not over-inflated.
• Disconnect the hose and securely close the air valve.

3. Filling with Water

• Ensure the drain valve is closed.
• Fill the hot tub with fresh water to the recommended fill line (approximately 980 liters capacity).

Image: The Lay-Z-Spa Hawaii hot tub fully inflated and filled with water in an outdoor setting.

Operating Instructions

Learn how to use the various functions of your Lay-Z-Spa.

1. Control Panel and App Control

The hot tub can be controlled via the integrated control panel or through the dedicated smartphone application.

• Power Button: Turns the hot tub system on/off.
• Temperature Adjustment: Use the arrow buttons to set the desired water temperature (range 20°C to 40°C).
• Heating Function: Activates the heater. The heating rate is approximately 1.8°C - 2.4°C per hour.
• AirJet Massage System: Activates the 140 AirJet nozzles for a bubble massage.
• Filter System: Activates the water filtration.
• Energy-Saving Timer: Allows scheduling of heating cycles up to 40 days in advance via the app or control panel.

Image: The digital control panel and a smartphone screen showing the Lay-Z-Spa app for remote control.

2. Heating and Frost Guard Technology

The hot tub features a powerful heating system capable of reaching up to 40°C. The integrated Frost Guard technology protects internal components during colder temperatures by automatically activating the heater when necessary.

Image: Illustration showing the hot tub water heated to 40°C, indicating its maximum temperature capability.

Maintenance

Regular maintenance is crucial for the performance and longevity of your hot tub.

1. Water Filtration

• The built-in filter pump circulates and cleans the water.
• Regularly check and clean the Type VI filter cartridge. Replace the filter cartridge every few weeks, or more frequently depending on usage and water quality.

2. Chemical Dispensing

• Use the ChemConnect™ chemical dispenser to uniformly distribute the appropriate dose of pool chemicals (e.g., chlorine tablets).
• Always follow the chemical manufacturer's instructions for dosage and safe handling.
• Test water chemistry regularly to ensure balanced pH and sanitizer levels.

Image: Components for hot tub maintenance: the hot tub with its cover, a ChemConnect dispenser, and a filter cartridge, highlighting their importance for hygiene.

3. Cleaning and Storage

• Drain the hot tub completely before cleaning or long-term storage.
• Clean the interior with a soft cloth and mild, non-abrasive cleaner.
• Ensure the hot tub is completely dry before folding and storing to prevent mold and mildew.
• Store in a dry, protected area away from extreme temperatures.

Troubleshooting

This section addresses common issues you might encounter. For more detailed troubleshooting, refer to the official Bestway support resources.

• No Power: Check the power connection and ensure the outlet is functional. Verify the GFCI plug is reset.
• Water Not Heating: Ensure the heater function is activated on the control panel or app. Check if the filter is clean and water flow is adequate. The Frost Guard system may be active in cold conditions.
• Weak Bubbles: Clean or replace the filter cartridge. Ensure the AirJet system is fully activated.
• Water Leakage: Inspect the hot tub for punctures. Use the provided repair patch for small leaks. Ensure all connections to the pump are tight.
• Error Codes: If an error code appears on the control panel, consult the Bestway support website or contact customer service for specific guidance.

Specifications

Warranty and Support

Specific warranty details and customer support contact information are typically provided with your purchase documentation or can be found on the official Bestway website. Please retain your proof of purchase for warranty claims.

For technical assistance, spare parts, or further inquiries, please visit the manufacturer's official support channels.