Introduction
This manual provides essential instructions for the safe and proper assembly, operation, and maintenance of your PawHut D00-032V00BG Folding Metal Dog Crate. Please read all instructions carefully before use and retain this manual for future reference.
This dog crate is designed for indoor use and is suitable for small dogs weighing up to 22 lbs (10 kg) with a body length of up to 19.7 inches (50 cm).
Safety Information
- Ensure all latches are securely fastened when a pet is inside the crate.
- Do not leave pets unattended for extended periods, especially during initial crate training.
- Regularly inspect the crate for any damaged or loose parts. Discontinue use if damage is found.
- This product is intended for indoor use only.
- Keep children away from the crate during assembly and ensure they do not play inside or around it when a pet is present.
- Ensure the crate is placed on a stable, level surface.
Package Contents
Verify that all components are present before beginning assembly.
- 1 x Folding Metal Crate Unit
- 1 x Removable ABS Tray
- 1 x Soft, Washable Cushion
Image: The PawHut folding metal dog crate, featuring a pug comfortably seated inside with the front door open. The removable soft cushion is visible at the bottom.
Setup Instructions
The PawHut dog crate is designed for quick and easy setup. Assembly is required.
- Unfold the Crate: Place the folded crate on a flat surface. Carefully lift the top panel and unfold the side panels outwards until the crate forms a rectangular shape.
- Secure Side Panels: Connect the side panels to the front and back panels using the integrated clips or hooks. Ensure all connections are secure and stable.
- Attach Top Panel: Lower the top panel into place and secure it to the side panels using the designated latches or clips.
- Insert Tray: Slide the removable ABS tray into the bottom of the crate. Ensure it sits flush and is properly aligned.
- Place Cushion: Lay the soft, washable cushion inside the crate on top of the tray for your pet's comfort.
Image: Illustration demonstrating the foldable design of the crate, showing it transitioning from a compact, folded state to its fully assembled form. A close-up of the convenient carry handle is also shown.
Operating Instructions
Door Operation
The crate features both a front door and a side door for flexible access. Each door is equipped with side-bolt latches for security.
- To open a door, slide the side-bolt latch(es) upwards or sideways to disengage them, then pull the door open.
- To close a door, swing it shut and slide the side-bolt latch(es) into the locked position. Ensure the latch is fully engaged to prevent accidental opening.
Image: The PawHut dog crate with both its front and side doors open, illustrating the "Easy In & Out" feature and highlighting the safety lock mechanism on the doors.
Folding for Storage/Transport
To fold the crate for storage or transport:
- Remove your pet, the cushion, and the tray from the crate.
- Disengage the latches securing the top panel and fold it inwards.
- Unclip the side panels and fold them inwards until the crate is flat.
- Use the built-in plastic handle for convenient carrying.
Maintenance and Cleaning
- Crate Frame: Wipe the metal frame with a damp cloth and mild detergent as needed. Dry thoroughly to prevent rust.
- Removable Tray: The ABS tray can be easily removed for cleaning. Wash with soap and water, then rinse and dry completely before returning it to the crate.
- Soft Cushion: The included cushion is washable. Refer to the care label on the cushion for specific washing instructions. Typically, machine wash on a gentle cycle with cold water and tumble dry on low heat.
- Regular Inspection: Periodically check all latches, hinges, and wire connections to ensure they are secure and in good working order.
Image: Detailed views of the crate's construction, highlighting the powder-coated steel frame, solid connection points, the removable plastic tray for easy cleaning, and the soft, comfortable cushion.
Troubleshooting
- Crate is unstable after assembly: Ensure all clips and latches are fully engaged and secured. Check that the crate is on a flat, level surface.
- Door not latching properly: Verify that the door is aligned correctly with the frame. Check for any obstructions preventing the latch from engaging fully.
- Difficulty folding/unfolding: Ensure all latches are disengaged before attempting to fold or unfold. Do not force the panels; they should move smoothly.
Specifications
| Feature | Detail |
|---|---|
| Model Number | D00-032V00BG |
| Overall Dimensions (Unfolded) | 76L x 53W x 60H cm (29.9" L x 20.9" W x 23.6" H) |
| Folded Dimensions | 76L x 53W x 8.5H cm (29.9" L x 20.9" W x 3.3" H) |
| Material | Alloy Steel (Powder-coated) |
| Tray Material | ABS Plastic |
| Gap Size | 1.2 Inches |
| Recommended Pet Size | Small dogs up to 10 kg (22 lbs) and 50 cm (19.7") body length |
| Doors | Front and Side (with side-bolt latches) |
| Intended Use | Indoor |
| Manufacturer | Aosom Canada |
| Country of Origin | China |
Image: A comprehensive diagram illustrating the full dimensions of the assembled crate (length, width, height, door openings) and its compact folded dimensions. A human figure is included for visual scale.
Image: A visual guide indicating dog breeds suitable for this crate size, including Bichon Frise, Boston Terrier, Jack Russell Terrier, Miniature Schnauzer, Pug, and French Bulldog. It also provides a diagram for measuring a dog's body length, advising suitability for dogs under 50 cm and 10 kg.
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please contact Aosom Canada, the manufacturer of PawHut products.
- Manufacturer: Aosom Canada
- Place of Business: Markham, Ontario, CA
- Telephone: 1-416-792-6088
- Online Store: PawHut Store on Amazon.ca
Please have your model number (D00-032V00BG) and purchase date available when contacting support.
