1. Introduction
Thank you for purchasing the Jocoevol Twin Over Twin Bunk Bed. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new bunk bed. Please read this manual thoroughly before assembly and retain it for future reference.
Image 1.1: The Jocoevol Twin Over Twin Bunk Bed, showcasing its design and under-bed storage capability.
2. Safety Information
Your safety is paramount. Please adhere to all warnings and instructions to prevent injury or damage to the product.
- Weight Capacity: Do not load the bunk bed with more than 440 pounds on the bottom bunk and 330 pounds on the top bunk.
- Anti-Tip Kit: Ensure the anti-tip kit is properly installed and secured to prevent accidental tipping.
- Guardrails: The top bunk features 16.5-inch high full-length guardrails. Always ensure they are securely in place before use.
- Ladder Safety: Use the ladder for climbing to and from the top bunk. Ensure the ladder is stable and properly attached.
- Mattress Size: Use only mattresses of the specified size (Twin) to ensure proper fit and safety.
- Assembly: Assemble the bed on a soft, clean surface to prevent scratches. Ensure all bolts and fasteners are tightened securely before use and periodically check for tightness.
- Children: Children under 6 years of age should not use the upper bunk.
- No Jumping: Do not allow jumping on the bed.
Image 2.1: Product dimensions and indicated weight capacities for both the top (330 lbs) and bottom (440 lbs) bunks.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Headboard and Footboard Panels
- Main Frame Tubes (Round Metal Tubes)
- Bed Slats
- Ladder Components
- Guardrails
- Hardware Pack (Bolts, Nuts, Washers, Allen Wrench)
- Bedside Storage Bag
- Movable Hooks (4 pieces)
- Anti-Tip Kit
- Assembly Instructions Manual
4. Setup and Assembly
Assembly is designed to be straightforward. It is recommended that two adults assemble this bunk bed. Please follow the included graphical instructions step-by-step.
- Unpack and Identify: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list.
- Assemble Bed Frames: Begin by assembling the headboard and footboard sections for both the upper and lower beds. Connect the side rails to these sections using the provided hardware. Do not fully tighten bolts until all sections are aligned.
- Install Bed Slats: Place the bed slats onto the designated supports on both the upper and lower frames. Ensure they are evenly spaced and secured.
- Attach Guardrails: Securely attach the full-length guardrails to the upper bunk frame.
- Assemble and Attach Ladder: Assemble the ladder components. The ladder is reversible and can be attached to either the left or right side of the bunk bed, depending on your room layout. Securely attach the ladder to the upper bunk.
- Final Tightening: Once all components are in place and aligned, systematically tighten all bolts and fasteners using the provided Allen wrench. Ensure the bed is stable and wobble-free.
- Install Anti-Tip Kit: Follow the instructions provided with the anti-tip kit to secure the bunk bed to a wall. This is a critical safety step.
Image 4.1: The removable ladder can be attached to either side of the bunk bed to suit different room configurations.
Image 4.2: Close-up view of the precision-drilled holes and slat connection for straightforward assembly.
5. Operating and Usage
This bunk bed offers versatile functionality for various needs.
5.1 Convertible 2-in-1 Design
The Jocoevol bunk bed can be easily converted into two separate twin beds. This feature provides flexibility for changing family needs or room layouts.
Image 5.1: Illustration of the bunk bed's ability to convert into two independent twin beds.
5.2 Storage Features
- Bedside Storage Bag: A convenient bedside storage bag is included for easy access to items such as phones, books, glasses, chargers, and remotes.
- Movable Hooks: Four movable hooks are provided for hanging bags, scarves, hats, and keys, enhancing the practicality of the top bunk.
- Under-Bed Storage Space: The bed features an 11.2-inch clearance underneath, providing ample space for suitcases, storage bins, or other large items, helping to keep your room organized.
Image 5.2: Detailed view of the bedside storage organizer, movable hooks, high safety guardrails, and rounded corners for enhanced safety.
Image 5.3: The headboard and footboard design, along with a visual representation of the 11.2-inch under-bed storage clearance.
Image 5.4: A visual comparison showing how the 11.2-inch under-bed storage space helps organize a room.
6. Maintenance
Proper maintenance will extend the life of your bunk bed.
- Cleaning: Wipe down metal surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Fastener Check: Periodically check all bolts, screws, and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
- Structural Integrity: Inspect the bed frame and slats regularly for any signs of wear, damage, or bending. Address any issues promptly.
- Ladder: Ensure the ladder is always securely attached and its steps are free from obstructions.
7. Troubleshooting
If you encounter any issues with your bunk bed, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed wobbles or feels unstable. | Loose fasteners; uneven floor. | Ensure all bolts and screws are fully tightened. Check if the bed is on a level surface; use shims if necessary. Verify anti-tip kit installation. |
| Squeaking noises. | Loose connections; friction between metal parts. | Tighten all fasteners. Apply a small amount of silicone lubricant to connection points if squeaking persists. |
| Ladder feels loose. | Ladder not securely attached. | Re-check the ladder attachment points and tighten all securing hardware. |
| Parts missing or damaged upon arrival. | Shipping damage or packing error. | Do not proceed with assembly. Contact Jocoevol customer support immediately with your purchase details. |
8. Specifications
Key specifications for the Jocoevol Twin Over Twin Bunk Bed:
- Model Number: FZZH24110401
- ASIN: B0FC294SP8
- Brand: Jocoevol
- Color: Black
- Size: Twin Over Twin
- Product Dimensions: 78.6"L x 41.3"W x 68"H
- Item Weight: 93.7 pounds
- Material: Metal (1.5-inch thick black round metal tubes)
- Finish Type: Polished
- Special Features: Convertible (into 2 individual beds), Heavy Duty, No Box Spring Needed, Reversible Ladder, Under-Bed Storage Space (11.2 inches), Bedside Storage Bag, Movable Hooks.
- Compatible Mattress Size: Twin
- Assembly Required: Yes
- Top Bunk Weight Capacity: 330 lbs
- Bottom Bunk Weight Capacity: 440 lbs
Image 8.1: Visual summary of key product specifications and features.
9. Warranty and Support
Jocoevol is committed to providing high-quality products and customer satisfaction. For any questions regarding assembly, missing parts, or product issues, please contact our dedicated support team.
Our support team is available to assist you and will respond within 24 hours. Please have your purchase details and model number (FZZH24110401) ready when contacting support.
For information on protection plans, please refer to your purchase documentation or the product listing on Amazon.com.
10. Important Notes
No official product videos from the seller were available in the provided data for embedding in this manual.