Introduction
The Eglo Morenci 35206 is a versatile 2-in-1 ceiling fan with an integrated LED light, designed to enhance comfort and style in indoor spaces. This appliance combines powerful airflow with modern, adjustable LED illumination, offering both performance and elegance. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of your new ceiling fan.
Safety Instructions
- Electrical Safety: Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or cleaning. Ensure all electrical connections comply with local codes and regulations.
- Professional Installation: Installation should be performed by a qualified electrician to prevent electrical shock or fire hazards.
- Mounting: Ensure the mounting surface can support the weight of the fan (4.5 kg) and is securely fastened.
- Clearance: Maintain adequate clearance between the fan blades and any obstructions.
- Water Exposure: Do not expose the unit to water or excessive humidity. This product is designed for indoor use only (IP20 rated).
- Remote Control Batteries: Use only AAA batteries for the remote control. Do not mix old and new batteries or different types of batteries.
- Children and Pets: Keep packaging materials and small parts away from children and pets.
Package Contents
Carefully unpack the box and ensure all items are present and undamaged.
- Eglo Morenci 35206 Ceiling Fan Unit (with integrated LED light)
- Remote Control
- Mounting Hardware (screws, anchors, etc.)
- Instruction Manual (this document)
Setup and Installation
The Eglo Morenci 35206 requires assembly and flush mounting to the ceiling. Due to electrical connections and safety requirements, professional installation by a qualified electrician is highly recommended.
- Prepare for Installation: Turn off power at the main circuit breaker to avoid electrical shock. Clear the installation area.
- Choose Location: Select a suitable ceiling location that can safely support the fan's weight and allows for proper air circulation without obstruction.
- Mounting Bracket: Securely attach the mounting bracket to the ceiling joist or a suitable electrical junction box designed for fan support, using the provided hardware.
- Electrical Wiring: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the separate installation guide (if applicable) and local electrical codes. Ensure all connections are secure.
- Attach Fan Unit: Carefully lift and attach the main fan unit to the mounting bracket, ensuring it is securely fastened.
- Final Checks: Double-check all connections and ensure the fan is stable. Restore power at the circuit breaker.
Image showing the Eglo Morenci 35206 ceiling fan with LED light installed on a ceiling, providing illumination and air circulation in a modern room setting.
Operating Instructions
The Eglo Morenci 35206 is operated using the included remote control. Insert two AAA batteries (not included) into the remote control before first use.
Image of the remote control for the Eglo Morenci 35206 ceiling fan, displaying buttons for fan speed, light control, color temperature adjustment, timer, and night mode.
- Power ON/OFF (Light): Press the ON/OFF button to turn the LED light on or off.
- Fan ON/OFF: Press the FAN ON/OFF button to start or stop the fan.
- Fan Speed Adjustment: Use the numbered buttons 1 through 6 to select the desired fan speed. 1 is the lowest speed, 6 is the highest.
- Light Dimming: Use the + and - buttons (next to the sun icon) to adjust the brightness of the LED light.
- Color Temperature Adjustment: Use the +K and -K buttons to change the color temperature of the LED light from warm white (2700K) to cool white (6500K).
- Night Light Mode: Press the Moon icon button to activate a soft night light setting.
- Timer Function: Press the 1H, 2H, or 4H buttons to set the fan and/or light to turn off automatically after 1, 2, or 4 hours, respectively.
- 30-Minute Light Off: Press the 30m button (next to the sun icon) to set the light to turn off after 30 minutes.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Eglo Morenci 35206 ceiling fan.
- Cleaning: Before cleaning, ensure the power is disconnected. Use a soft, dry cloth to wipe down the fan blades, motor housing, and light cover. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Remote Control Battery Replacement: When the remote control's range decreases or it stops responding, replace the two AAA batteries. Ensure correct polarity when inserting new batteries.
- Tightening Screws: Periodically check and tighten any loose screws on the mounting bracket or fan housing to ensure safe operation.
Troubleshooting
If you encounter issues with your Eglo Morenci 35206, refer to the following common problems and solutions:
- Fan Does Not Operate:
- Ensure the main power supply to the fan is turned on at the circuit breaker.
- Check if the remote control batteries are correctly inserted and not depleted. Replace if necessary.
- Verify all electrical connections are secure (consult a qualified electrician if unsure).
- Light Does Not Turn On:
- Check the main power supply.
- Ensure the remote control batteries are functional.
- The LED light is integrated and not user-replaceable. If the light fails, contact customer support.
- Remote Control Not Responding:
- Replace the AAA batteries in the remote control.
- Ensure there are no obstructions between the remote control and the fan unit.
- Try pairing the remote control again if instructions are provided in a separate guide (not typically required for this model).
- Excessive Noise or Wobbling:
- Ensure all mounting screws are securely tightened.
- Verify the fan unit is properly attached to the mounting bracket.
- Check if any internal components are loose (consult a qualified electrician).
If troubleshooting steps do not resolve the issue, please contact Eglo customer support for further assistance.
Specifications
- Model Number: 35206
- Brand: Eglo
- Dimensions (L x W x H): 48 cm x 48 cm x 24 cm
- Weight: 4.5 kg
- Material: ABS body, Acrylic shade
- Color: White
- Voltage: 220-240V, 50Hz
- Total Power Consumption: 45.9W (LED) + 18W (Motor) = 63.9W
- Light Type: Integrated LED
- Lumen Output: 5200 lm (maximum)
- Color Temperature: 2700K – 6500K (Tunable White)
- Control Method: Remote Control
- Fan Speeds: 6 levels
- IP Rating: IP20 (Indoor use only)
- Electrical Protection Class: Class II
- Assembly Required: Yes
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Eglo website. If you require technical assistance, spare parts, or have any questions not covered in this manual, please contact Eglo customer support.
Eglo Customer Service: Please refer to your product packaging or the Eglo official website for contact details specific to your region.
