ROOMTEC Modular Closet System - 46" Wall Mounted Organizer

1. Introduction

This manual provides detailed instructions for the assembly, installation, and maintenance of your ROOMTEC Modular Closet System, 46" Wide, Model 15. Please read all instructions carefully before beginning assembly to ensure safe and correct installation.

The ROOMTEC Modular Closet System is designed to provide versatile and efficient storage for your wardrobe. This specific kit includes one double hanging section (19.5" wide) and one shoe shelf closet tower (25.5" wide).

2. Safety Information

• Always assemble on a clean, flat, and soft surface to prevent scratches.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
• Do not overload shelves or hanging rods. Refer to specifications for weight limits.
• This unit is designed for wall-mounting. Securely attach it to wall studs or use appropriate wall anchors for your wall type. Failure to do so may result in injury or damage.
• Keep small parts away from children during assembly.

3. Package Contents

Verify that all components listed below are present before starting assembly. If any parts are missing or damaged, please contact customer support.

• 1x Double Hanging Section (19.5" wide)
• 1x Shoe Shelf Closet Tower (25.5" wide)
• All necessary assembly hardware (screws, dowels, brackets, wall anchors)
• Assembly instructions manual

Image: Overview of the individual components included in the package, showing the double hanging section and the shoe shelf tower before assembly.

4. Setup and Assembly

Assembly is designed to be straightforward with pre-drilled holes and labeled parts. Two people are recommended for easier and safer assembly, especially during wall mounting.

Tools Required:

• Phillips Head Screwdriver
• Hammer (for dowels)
• Drill (for wall mounting)
• Level
• Measuring Tape
• Stud Finder (recommended for wall mounting)

Assembly Steps:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a soft, clean surface. Refer to the parts list in your separate assembly guide to identify each piece.
2. Assemble the Double Hanging Section: Follow the specific instructions provided in the included assembly guide for constructing the 19.5" wide double hanging unit. This typically involves attaching side panels to shelves and securing the hanging rods.
3. Assemble the Shoe Shelf Closet Tower: Follow the specific instructions provided in the included assembly guide for constructing the 25.5" wide shoe shelf tower. This involves attaching side panels to fixed and adjustable shelves.
4. Combine Units (Optional): If you are combining these units, align them as desired and secure them together using the provided connectors.
5. Prepare for Wall Mounting: Determine the desired location on your wall. Use a stud finder to locate wall studs for secure mounting. Mark the drilling points for the wall brackets.
6. Mount to Wall: Drill pilot holes at the marked locations. Attach the wall brackets to the wall using appropriate screws and anchors. Carefully lift and attach the assembled closet system to the wall brackets, ensuring it is level and secure.

Image: Detailed dimensions of the 46" wide modular closet system, including the 19.5" double hanging section and the 25.5" shoe shelf tower.

Image: The fully assembled 46" wide ROOMTEC Modular Closet System, showcasing the double hanging section and the shoe shelf tower with various items stored.

5. Operating and Customization

Your ROOMTEC Modular Closet System is designed for flexible storage. The shoe shelf tower features adjustable shelves, allowing you to customize the height to accommodate different shoe sizes or other items.

Key Features:

• Double Hanging Rods: Provides ample space for hanging shirts, jackets, and other garments.
• Adjustable Shoe Shelves: Configure shelf heights to fit various footwear or small accessories.
• Modular Design: This unit can be combined with other ROOMTEC modular components to create a larger, customized closet solution.

Image: Examples of how different ROOMTEC modular units can be combined to create larger, customized closet systems.

Image: A close-up view demonstrating the adjustable shelf feature within the closet tower, highlighting the flexibility for storage.

6. Maintenance

To ensure the longevity and appearance of your ROOMTEC Modular Closet System, follow these maintenance guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Dusting: Regularly dust the unit with a dry, soft cloth.
• Hardware Check: Periodically inspect all screws and connections. Re-tighten any loose hardware to maintain stability.
• Avoid Moisture: Do not expose the unit to excessive moisture or direct sunlight, as this can cause warping or discoloration.

7. Troubleshooting

8. Specifications

• Brand: ROOMTEC
• Model: Model 15
• Part Number: RO-Model15-2-zjl
• Material: High-density Particle Board (Composite)
• Color: White
• Overall Dimensions (L x W x H): 14 x 46 x 71.25 inches
• Item Weight: 100 pounds
• Included Components: 1x Double Hanging (19.5" wide), 1x Shoe Shelf Closet Tower (25.5" wide)
• Assembly Required: Yes
• Wall Mounted: Yes

9. Warranty and Support

ROOMTEC products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ROOMTEC website.

If you encounter any issues during assembly or use, or if you require replacement parts, please contact ROOMTEC customer support. Have your model number (Model 15) and part number (RO-Model15-2-zjl) ready for faster service.

Contact Information: Please refer to the packaging or the official ROOMTEC website for the most current customer support contact details.