1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your MMS MS360T Mini Skid Steer Loader. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.
The MMS MS360T is a compact and versatile mini skid steer loader designed for various tasks including material handling, cleaning, and landscaping. It features a robust RATO gasoline engine and a triangle track design for optimal performance and maneuverability.
2. Safety Information
Always prioritize safety when operating heavy machinery. Failure to follow safety instructions can result in serious injury or death.
- Read and understand all instructions and warnings in this manual before operation.
- Wear appropriate personal protective equipment (PPE), including hard hat, safety glasses, hearing protection, and steel-toed boots.
- Ensure the work area is clear of bystanders, especially children and pets.
- Never operate the machine under the influence of alcohol or drugs.
- Perform daily pre-operation checks as outlined in the maintenance section.
- Keep all guards and safety devices in place and in working order.
- Be aware of your surroundings and potential hazards, such as uneven terrain, slopes, and overhead obstructions.
3. Product Overview
3.1 Key Features
- Engine: Equipped with a 13.5HP EPA RATO gasoline engine, featuring air-cooled cooling for stable power output and reduced maintenance.
- Track Design: Triangle track design with rubber tracks provides strong grip, reduces ground pressure, and minimizes damage to surfaces.
- Compact Size: With a width of only 39 inches, the MS360T can easily maneuver in narrow spaces.
- Attachment Compatibility: Features a quick attach plate, supporting a wide range of attachments for various tasks.
- Standard Bucket: Includes a 42-inch wide bucket for sand, soil, and material handling.
3.2 Components
The MS360T consists of the main chassis, engine, hydraulic system, operator controls, and quick-attach plate for implements. The lift arm and bucket attachments can be operated independently.
4. Specifications
The following table details the technical specifications of the MMS MS360T Mini Skid Steer Loader:
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Model | MS360T | Max Working Height | 83.46 inch |
| Engine | RATO R420 | Max Pin Height | 73.42 inch |
| Rated Power (Kw) | 9.7Kw/3600rpm | Max Dumping Height | 55.31 inch |
| Rotating Speed (rpm) | 3600 | Max Dumping Distance | 22.64 inch |
| Noise (Db) | <95 | Max Dumping Angle | 35° |
| Pressure (Mpa) | 0-17Mpa | Total Height | 53.15 inch |
| Flow Rate | 0-18L | Ground Clearance | 4.76 inch |
| Engine Oil | 1.7L | Overall Length without Bucket | 58.86 inch |
| Bucket Capacity | 0.13m³ | Total Width | 38.98 inch |
| Travel Speed | 0-3Km/h | Bucket width | 42.52 inch |
| Operating Weight | 630kg | Total Length with Bucket | 88.38 inch |
| Fuel Type | Gasoline | Product Dimensions | 79 x 44 x 53 inches |
| Item Weight | 1800 pounds |
5. Setup and Initial Inspection
5.1 Unpacking
The MMS MS360T Mini Skid Steer Loader is typically shipped in a wooden crate. Use appropriate lifting equipment, such as a forklift, for safe unloading.
5.2 Contents Check
Verify that all components are present and undamaged upon receipt. The package should include:
- MMS MS360T Mini Skid Steer Loader main unit
- Standard 42-inch bucket attachment
- Toolbox
- Instruction Manual (this document)
5.3 Pre-Operation Checks
Before the first use and prior to each operation, perform the following checks:
- Fluid Levels: Check engine oil and hydraulic fluid levels. Refer to the Maintenance section for specifications.
- Fuel: Ensure the fuel tank contains sufficient gasoline.
- Tracks: Inspect tracks for damage or excessive wear.
- Controls: Verify that all control levers and pedals move freely and return to neutral.
- Safety Devices: Confirm all safety guards, lights, and warning decals are intact and functional.
- Attachments: Ensure any attached implements are securely fastened to the quick attach plate.
6. Operating Instructions
6.1 Starting the Engine
Follow these steps to start the RATO gasoline engine:
- Ensure the machine is on level ground and the parking brake is engaged.
- Turn the fuel valve to the 'ON' position.
- Open the engine throttle slightly.
- If the engine is cold, engage the choke.
- Insert the key into the ignition and turn it to the 'START' position. Release once the engine starts.
- Once the engine is running, gradually disengage the choke (if used) and allow the engine to warm up for a few minutes before operation.
Video 1: Engine Starting Procedure. This video demonstrates the step-by-step process for starting the engine of a similar MMS track skid steer loader, including throttle and choke operation.
6.2 Controls and Driving
The MS360T is operated using joystick controls for movement and hydraulic functions. Familiarize yourself with the control layout before attempting to drive.
- Driving: Use the left and right joysticks to control forward, reverse, and turning movements. Push both forward to move straight, pull both back for reverse. Push one forward and pull the other back to turn.
- Lift Arm: Typically controlled by one joystick, moving it up or down raises or lowers the lift arms.
- Bucket/Attachment: Controlled by another joystick or switch, allowing for tilting, curling, or operating specific attachment functions.
6.3 General Operation Tips
- Operate at a safe speed, especially on uneven terrain or when carrying a load.
- Maintain a low center of gravity by keeping the bucket or attachment low when traveling.
- Avoid sudden movements or turns, which can lead to instability.
- When working on slopes, always drive straight up or down, never across.
- The compact width of 39 inches allows for navigation in narrow spaces like orchards and courtyards.
7. Maintenance
Regular maintenance is crucial for the longevity and safe operation of your MS360T Mini Skid Steer Loader. The RATO engine's air-cooled design contributes to lower maintenance costs.
7.1 Daily Checks
- Check engine oil level.
- Check hydraulic fluid level.
- Inspect tracks for debris, damage, or tension.
- Clean air filter if operating in dusty conditions.
- Check for any visible leaks (fuel, oil, hydraulic fluid).
- Ensure all lights and safety alarms are working.
7.2 Scheduled Maintenance
- Engine Oil Change: Refer to the RATO engine manual for specific intervals, typically every 50-100 hours of operation.
- Hydraulic Filter Replacement: Replace as recommended by the manufacturer, usually every 200-500 hours.
- Spark Plug Inspection/Replacement: Check annually or as needed.
- Fuel Filter Replacement: Replace as needed or annually.
- Track Tension Adjustment: Periodically check and adjust track tension to prevent premature wear.
8. Troubleshooting
This section provides solutions to common operational issues. For problems not listed here, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine does not start | No fuel, dead battery, spark plug issue, choke not set | Check fuel level, charge/replace battery, inspect/replace spark plug, adjust choke. |
| Loss of hydraulic power | Low hydraulic fluid, clogged filter, pump issue | Check/refill hydraulic fluid, replace hydraulic filter, contact service for pump inspection. |
| Machine moves slowly or weakly | Engine running rough, low fuel, hydraulic issue | Check engine performance, ensure adequate fuel, inspect hydraulic system. |
| Excessive vibration | Loose components, unbalanced tracks, engine issue | Inspect all fasteners, check track condition, consult engine manual. |
9. Compatible Attachments
The MMS MS360T Mini Skid Steer Loader is designed with a quick attach plate, allowing for compatibility with a wide range of assistive devices (attachments sold separately). This versatility makes it suitable for various applications on farms, construction sites, and for landscaping.
Common attachments include:
- Grapple: For handling brush, logs, and irregular materials.
- Side Shift Fork: For palletized loads and material transport.
- Ripper: For breaking up compacted soil or roots.
- Breaker: For demolition tasks.
- Auger: For drilling post holes.
- Land Leveler: For grading and smoothing surfaces.
- Traction Device: For specific ground engagement needs.
- Broom Sweeper: For clearing debris.
- Stump Grinder: For removing tree stumps.
- 4-in-1 Bucket: A versatile bucket for multiple functions.
10. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact MMS customer support directly. MMS Excavator offers customer support and typically provides a 30-day easy returns policy.
If you require technical assistance, replacement parts, or have questions regarding your MMS MS360T Mini Skid Steer Loader, please contact the manufacturer or your authorized dealer.
