Baseus 30000mAh 65W Portable Charger Instruction Manual

Introduction

This manual provides detailed instructions for the safe and efficient use of your Baseus 30000mAh 65W Portable Charger. Please read this manual thoroughly before operating the device and retain it for future reference.

Product Overview

Figure 1: The Baseus 30000mAh 65W Portable Charger, shown in white, accompanied by two USB-C to USB-C cables.

The Baseus 30000mAh 65W Portable Charger is a high-capacity power bank designed for fast charging multiple devices simultaneously. It features a digital display for real-time monitoring of power, current, and voltage, and offers multiple input and output ports for broad compatibility.

Setup

Charging the Power Bank

Before initial use, fully charge the power bank. The device supports 60W PD input for a full recharge in approximately 2.5 hours. A 60W PD charger is required (not included).

1. Connect a USB-C to USB-C cable (included) to the IN/OUT1 port (65W) of the power bank.
2. Connect the other end of the cable to a compatible 60W PD wall charger.
3. The digital display will indicate the charging status and current battery percentage.

Figure 2: Recharging the power bank using a 60W PD charger. A full recharge takes approximately 2.5 hours.

Operating Instructions

Connecting Devices

The power bank features 5 output ports (4 USB-A + 1 USB-C) and 3 input ports (1 USB-C, 1 IP, 1 Micro USB). It supports simultaneous charging of up to 5 devices.

Figure 3: The power bank connected to and charging multiple devices, including a smartphone, tablet, and earbuds.

1. Identify the appropriate charging cable for your device (USB-C, USB-A, Micro USB).
2. Connect one end of the cable to your device.
3. Connect the other end of the cable to an available output port on the power bank.
4. The power bank will automatically begin charging. The digital display will show the output wattage for connected devices.

Digital Display

The integrated smart digital display provides real-time information about the power bank's status.

• Battery Percentage: Shows the remaining charge level of the power bank.
• Current Output/Input: Displays the wattage being delivered to connected devices or received during recharging.
• Voltage: Indicates the voltage during charging or discharging.

Figure 4: The LED digital display provides real-time data on the power bank's operational status.

Features

• 65W Ultra-Fast Charging: The USB-C PD port can charge compatible laptops like a MacBook Pro 13" from 0-50% in approximately 56 minutes. A 100W USB-C to C cable is included.
• Super Large Capacity (30000mAh): Provides extended power, capable of charging an iPhone 15 up to 6 times, a Samsung S20 Ultra 4 times, an iPad Pro 2020 2.2 times, or a full charge for a 13-inch MacBook Pro.
• 5-Output + 3-Input Ports: Allows charging of up to 5 devices simultaneously (4 USB-A, 1 USB-C) while the power bank itself can be recharged via 60W PD input. Smart power allocation optimizes charging speed for each connected device.
• Widely Compatible: Supports PD 3.0, QC 4.0, and SCP fast charging protocols, making it compatible with a wide range of USB-C and USB-A powered devices including MacBook Pro, Dell XPS, iPhone 15/14/13/12/11/SE/XS, iPad Pro, Samsung Galaxy S10, Google Pixel, Steam Deck, and ASUS ROG Ally.
• Multi-protection System: Built-in smart identifying chip system provides advanced protection against over-heat, over-current, over-discharge, over-voltage, and short-circuit. The device is FCC/CE certified.

Figure 5: Internal multi-protection system safeguards against various electrical hazards.

Specifications

Maintenance

• Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid dropping or subjecting the device to strong impacts.
• Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• If the power bank will not be used for an extended period, charge it to approximately 50-70% every three months to prolong battery life.

Troubleshooting

• Device not charging:
  • Ensure the power bank is sufficiently charged.
  • Check if the charging cable is securely connected to both the power bank and the device.
  • Try a different charging cable or port.
  • Verify that your device is compatible with the power bank's charging protocols (PD 3.0, QC 4.0, SCP).
• Power bank not recharging:
  • Ensure the charging cable is securely connected to the power bank's input port and the wall charger.
  • Verify that the wall charger is functioning correctly and provides at least 60W PD output for optimal speed.
  • Try a different wall outlet or charging cable.
• Digital display not working:
  • Press the power button to activate the display.
  • If the issue persists, the power bank may require servicing.

Warranty and Support

The Baseus 30000mAh 65W Portable Charger comes with a 2-year protection plan. For any product problems or support inquiries, please contact Baseus customer service for timely resolution.

Official Product Videos