MARVO WM111PK Wireless Mouse

Introduction

Thank you for choosing the MARVO WM111PK Wireless Mouse. This ergonomic mouse offers dual connectivity options (Bluetooth 5.2 and 2.4GHz wireless) and 6 programmable buttons for enhanced productivity. This manual provides detailed instructions to help you set up, operate, and maintain your device.

Package Contents

• 1 x MARVO WM111PK Wireless Mouse
• 1 x USB Receiver (2.4GHz)
• 1 x Charging Cable (USB-C)
• 1 x User Manual

Product Overview

Familiarize yourself with the components of your MARVO WM111PK Wireless Mouse.

Figure 1: Top view of the MARVO WM111PK Wireless Mouse. This image displays the primary left and right click buttons, the central scroll wheel, and the MARVO branding.

Figure 2: Side view of the MARVO WM111PK Wireless Mouse. This image shows the ergonomic contour and the two accessible side buttons, which are programmable.

1. Left Click Button
2. Right Click Button
3. Scroll Wheel
4. Forward Button (Programmable)
5. Backward Button (Programmable)
6. DPI/Mode Switch Button (Location may vary, often on top or bottom)
7. Power On/Off Switch (Located on the bottom)
8. USB-C Charging Port (Located on the front)
9. USB Receiver Storage Slot (Located on the bottom)

Setup

1. Charging the Mouse

Before first use, ensure the mouse is fully charged. Connect the provided USB-C charging cable to the charging port on the front of the mouse and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status and turn off when fully charged.

2. Connecting via 2.4GHz Wireless

1. Locate the USB receiver, usually stored in a slot on the bottom of the mouse.
2. Plug the USB receiver into an available USB port on your computer.
3. Turn on the mouse using the Power On/Off switch located on the bottom.
4. The mouse should automatically connect to your computer. If not, press the mode switch button (if available) to select 2.4GHz mode.

3. Connecting via Bluetooth 5.2

1. Turn on the mouse using the Power On/Off switch.
2. Press and hold the mode switch button (often located on the bottom or top) until the LED indicator starts blinking, indicating pairing mode.
3. On your computer or device, go to Bluetooth settings.
4. Search for new devices and select "MARVO WM111PK" (or similar name) from the list.
5. Once paired, the LED indicator will stop blinking and remain solid for a few seconds before turning off.

Operating Instructions

Switching Connection Modes

The MARVO WM111PK mouse supports switching between 2.4GHz wireless and Bluetooth modes. Use the dedicated mode switch button (refer to Product Overview) to toggle between the connected devices. The LED indicator may change color or blink pattern to indicate the active mode.

DPI Adjustment

The mouse features a 1600 DPI optical sensor for precise cursor control. If a DPI switch button is present, pressing it will cycle through available DPI settings. Refer to the product overview for the location of this button.

Programmable Buttons

The MARVO WM111PK includes 6 programmable buttons. To customize these buttons, you may need to download specific software from the official MARVO website. Follow the instructions provided with the software to assign functions to each button.

Maintenance

Cleaning

• Turn off the mouse before cleaning.
• Use a soft, dry, lint-free cloth to wipe the surface of the mouse.
• For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid excessive moisture.
• Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the mouse's finish.

Storage

When not in use for extended periods, turn off the mouse to conserve battery life. Store the mouse and USB receiver in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

• Mouse not responding:
  • Ensure the mouse is turned on.
  • Check the battery level and charge if necessary.
  • Verify the USB receiver is securely plugged into a working USB port (for 2.4GHz mode).
  • Ensure Bluetooth is enabled on your device and the mouse is correctly paired (for Bluetooth mode).
  • Try switching between 2.4GHz and Bluetooth modes.
  • Test the mouse on a different computer or device.
• Cursor movement is erratic or slow:
  • Clean the optical sensor on the bottom of the mouse.
  • Ensure you are using the mouse on a suitable surface (non-reflective, non-transparent).
  • Check for low battery.
• Programmable buttons not working:
  • Ensure you have installed the necessary software from the MARVO website.
  • Verify that the buttons are correctly configured within the software.

Specifications

Warranty and Support

MARVO products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or to download the latest drivers and software for your WM111PK mouse, please visit the official MARVO website or contact their customer support directly.

Official MARVO Website: Visit the MARVO Store on Amazon