Tilta NP-W235 Portable Charging Station User Manual

Introduction

The Tilta NP-W235 Portable Charging Station is designed for efficient charging of up to four NP-W235 batteries simultaneously. It supports USB-C Power Delivery (PD) for fast charging, offering a maximum of 45W. This station is compatible with Fujifilm, Tilta, and most third-party NP-W235 batteries, including those used in cameras such as the X-T5, X-T4, X-S20, GFX100 II, GFX100S, GFX100RF, GFX50S II, GFX50S, XH2S, and XH2. Its compact design also functions as a protective storage case for your batteries.

Image: The Tilta NP-W235 Portable Charging Station, featuring its robust green casing and transparent lid, designed to hold four batteries.

Setup

1. Unpack the Charging Station: Carefully remove the charging station and the included USB-C charging cable from its packaging.
2. Open the Lid: Release the two latches on the sides of the charging station to open the clear lid.
3. Insert Batteries: Insert up to four compatible NP-W235 batteries into the designated slots. Ensure each battery clicks securely into place.
4. Connect Power: Connect one end of the USB-C charging cable to the USB-C port on the charging station. Connect the other end to a compatible USB-C Power Delivery (PD) charger (not included). For optimal fast charging performance, a 45W or higher PD charger and a compatible cable are required.

Image: Components of the charging station, including the main unit with four battery slots, the detachable lid, and the USB-C charging cable.

Operating Instructions

Charging Batteries

• Once batteries are inserted and the charging station is connected to a power source, charging will begin automatically.
• The station supports simultaneous charging of all four batteries.
• With a 45W PD charger, four batteries can be fully charged in approximately 3 hours.

Real-Time Indicator Lights

The charging station features real-time indicator lights for each battery slot, providing visual feedback on the charging status:

• Red Light: Indicates low battery (0%-30% charged).
• Yellow Light: Indicates medium battery (30%-90% charged).
• Green Light: Indicates high battery (90%-100% charged).

These lights display battery levels when inserted and automatically turn off after 5 seconds if not actively charging.

Image: Visual representation of the real-time indicator lights and their corresponding battery charge levels.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the charging station. Avoid using harsh chemicals or abrasive materials.
• Storage: When not in use, store the charging station in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery health, it is recommended not to leave batteries unused in the station for more than three months without a charge cycle. The station features low power loss in sleep mode (approximately 0.1mAh natural discharge) to minimize battery drain anxiety.
• Lid Security: Ensure the lid is securely latched when transporting the station to protect the batteries from damage.

Image: The charging station in a natural setting, highlighting its energy management capabilities and suitability for storage.

Troubleshooting

• Batteries Not Charging:
  • Ensure the USB-C cable is securely connected to both the charging station and the power adapter.
  • Verify that the power adapter is functioning correctly and provides sufficient power (45W PD recommended).
  • Check if the batteries are inserted correctly into their slots.
  • Confirm that the batteries are compatible NP-W235 type.
• Slow Charging:
  • Ensure you are using a USB-C PD charger with a minimum output of 45W. Lower wattage chargers will result in slower charging times.
  • Use a high-quality USB-C cable that supports fast charging.
• Indicator Lights Not Functioning:
  • If the lights do not illuminate upon battery insertion, ensure the batteries are properly seated and have some charge.
  • If connected to power, check the power source and cable.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Tilta website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Online Resources: Visit the official Tilta website for product updates, FAQs, and additional support resources.