1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BOTSLAB Starvis 4K Dashcam G980H Pro. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Package Contents
- 1 x Front Car Dashcam with 64 GB SD Card
- 1 x Rear View Camera (with 6-meter extension cable)
- 1 x Car Cigarette Charger (3-meter Type-C cable)
- 1 x Instruction Manual
- 2 x Electrostatic Films
- 1 x Mounting Pry Bar
2. Setup and Installation
2.1 Front Camera Installation
The front dashcam is designed for easy installation using electrostatic film and 3M adhesive. Ensure the windshield is clean and dry before application.
- Clean the desired area on your windshield.
- Apply the electrostatic film to the windshield, ensuring no air bubbles.
- Attach the front dashcam to the electrostatic film using the 3M adhesive.
- Use the included mounting pry bar to neatly tuck the power cable along the car's interior trim.
Image: The BOTSLAB Starvis 4K Dashcam G980H Pro, showing the front camera, rear camera, 64GB SD card, and a smartphone displaying the companion app interface.
Image: Diagram illustrating the installation points for the front camera, rear camera, and power supply in a car.
2.2 Rear Camera Installation
The rear camera connects to the front unit via a 6-meter extension cable and can be rotated 360° for optimal viewing.
- Connect the rear camera to the front dashcam using the provided 6-meter extension cable.
- Mount the rear camera in a suitable location, typically on the rear windshield, ensuring a clear view.
- Adjust the rear camera's angle as needed, utilizing its 360° rotation capability.
Image: Illustration showing the 4K front camera view and 2K rear camera view, highlighting the 360-degree rotatable rear camera.
2.3 Power Connection
Connect the dashcam to your vehicle's power supply using the included car cigarette charger.
- Insert the Type-C end of the 3-meter cable into the dashcam.
- Plug the cigarette lighter adapter into your car's 12V power outlet.
3. Operating Instructions
3.1 Initial Power On and Recording
Once connected to power, the dashcam will automatically power on and begin recording when the vehicle starts.
3.2 Voice Control
The BOTSLAB G980H Pro supports intelligent voice control in English, allowing hands-free operation for increased safety.
- Say "Take photo" to capture a still image.
- Say "Video start" to begin video recording.
- Say "Turn on screen" or "Turn off screen" to control the display.
- Say "Show front camera" or "Show rear camera" to switch views on the display.
Image: A person using voice commands to operate the dashcam, with examples of commands like "Take photo" and "Video start".
3.3 Wi-Fi Connectivity and App Usage
Connect your dashcam to the "BOTSLAB" app via 2.4G/5GHz Wi-Fi for live viewing, video download, and settings management.
- Download the "BOTSLAB" app from your smartphone's app store (iOS or Android).
- Enable Wi-Fi on your dashcam and smartphone.
- Connect to the dashcam's Wi-Fi network (5GHz for faster connection).
- Open the app to view live footage, download recorded videos (up to 10 MB/s), and access GPS tracking data.
Image: A car driving on a scenic road, with an overlay showing GPS coordinates, speed, and a smartphone displaying the BOTSLAB app with a map and route tracking.
3.4 ADAS (Advanced Driver Assistance System)
The dashcam features ADAS functions to enhance driving safety.
- Forward Collision Warning: Alerts you if you are too close to the vehicle in front.
- Pedestrian Detection: Warns of pedestrians in the vicinity.
- Lane Departure Warning: Notifies you if you drift out of your lane.
- Driver Fatigue Reminder: Prompts you to take a break every 2 hours of continuous driving.
Image: A diagram illustrating various ADAS warnings: front vehicle starting, pedestrian detection, too close warning, and lane departure warning.
3.5 Loop Recording and G-Sensor
The dashcam continuously records video. When the 64GB memory card is full, the oldest recorded video will be automatically overwritten to make space for new recordings.
The built-in G-sensor automatically locks emergency recordings in case of an incident (e.g., sudden braking or collision) to prevent them from being overwritten.
3.6 Parking Monitoring
For 24/7 parking surveillance, a separate hardwire kit (ASIN: B0DSZR126N) is required and not included in the standard package. When connected via the hardwire kit, the dashcam can monitor your vehicle while parked.
4. Maintenance
4.1 Cleaning the Lenses and Screen
Regularly clean the front and rear camera lenses, as well as the IPS screen, with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
4.2 Memory Card Management
While loop recording manages space automatically, it is recommended to periodically back up important footage and format the 64GB microSD card every few months to maintain optimal performance and prevent data corruption.
4.3 Temperature Resistance
The dashcam is designed to operate in temperatures ranging from -20°C to +70°C. Avoid exposing the device to extreme temperatures outside this range for prolonged periods.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dashcam does not power on. | No power supply; faulty cable/charger; loose connection. | Check power connection; ensure cigarette lighter socket is working; try a different USB cable/charger. |
| Recording stops or freezes. | Memory card full or corrupted; low power. | Format the SD card; ensure stable power supply; replace SD card if necessary. |
| Poor video quality at night. | Dirty lens; extreme low light conditions. | Clean the lens; ensure WDR function is enabled in settings. |
| Wi-Fi connection issues. | Incorrect Wi-Fi password; interference; app issues. | Re-enter Wi-Fi password; try connecting in a different location; restart dashcam and phone; reinstall app. |
| Voice control not responding. | Language setting incorrect; noisy environment. | Ensure voice control language is set to English; speak clearly and reduce background noise. |
6. Specifications
| Feature | Detail |
|---|---|
| Model | G980H Pro |
| Front Camera Resolution | 4K (Ultra HD) |
| Rear Camera Resolution | 2K |
| Front Camera Angle | 170° |
| Rear Camera Angle | 150° (360° rotatable) |
| Display Size | 2.45 inches IPS LCD |
| Memory Card | 64 GB microSD (included) |
| Wi-Fi | 2.4G/5GHz built-in |
| GPS | Integrated (Google Maps compatible) |
| Special Features | ADAS, Voice Control, WDR, Supercapacitor, G-Sensor, Loop Recording, Parking Monitoring (with optional hardwire kit) |
| Operating Temperature | -20°C to +70°C |
| Dimensions | 14 x 11 x 7 cm |
| Weight | 690 g |
7. Warranty and Support
BOTSLAB offers comprehensive customer service for your product.
- Quality Guarantee: 365 days.
- Technical Support: Lifetime technical assistance.
- Free Returns: Within 30 days.
- Fast Assistance: 48-hour response time.
- Warranty Period: Two years for product issues.
Contact Information
For any inquiries or support, please use the following channels:
- Live Chat: Download the "Botslab" APP, register and log in, then navigate to User > Help & Feedback > Live Chat.
- Website: global.botslab.com
- Email: service@botslab.com
- Social Media: Botslab Users Group (Facebook)
Image: Infographic detailing Botslab customer care services including quality guarantee, technical support, free returns, fast assistance, and contact methods like live chat, website, email, and social media.
