1. Introduction
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Mepplzian LED Lighted Medicine Cabinet. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
- Always follow the assembly instructions carefully.
- Do not exceed the maximum load capacity of 33 lbs (15 kg) for the cabinet.
- Be cautious of potential pinch points during installation and operation of the doors.
- Keep electrical components away from direct water exposure.
- Always unplug the cabinet from the power source when not in use or during cleaning/maintenance.
- Ensure proper grounding for all electrical connections.
3. Package Contents
Verify that all components are present before beginning assembly:
- Medicine Cabinet (x1)
- Glass Shelves (x3)
- Hardware Accessories (screws, anchors, shelf clips, hinges)
- Instruction Manual (x1)
4. Setup and Installation
This medicine cabinet is designed for wall-mounted installation. Assembly is required. It is recommended to have two people for installation due to the weight and size of the unit.
4.1 Dimensions
The overall dimensions of the cabinet are approximately 5.2"D x 31.5"W x 23.6"H. Please ensure your bathroom wall space is adequate before installation.
Figure 1: Product Dimensions and Internal Layout
4.2 Assembly Steps
Follow the detailed instructions provided in the included manual for assembling the cabinet frame and attaching the doors. Ensure all screws are tightened securely, but do not overtighten to avoid damaging the MDF material.
Figure 2: Assembly Diagram
4.3 Wall Mounting
The cabinet is designed for wall mounting. It is highly recommended to mount the cabinet directly into wall studs for maximum stability, especially given its weight (19.56 lbs) and capacity. The mounting points are typically spaced 16 inches apart to align with standard stud spacing.
Figure 3: Wall Mounting Instructions
Video 1: Detailed installation guide for the lighted medicine cabinet, including electrical outlet and USB charging setup.
4.4 Shelf Installation
The cabinet includes 3 adjustable glass shelves, dividing the interior into 5 separate spaces. Install the glass shelves using the provided shelf clips. It is advisable to install the shelves before attaching the mirror doors to allow for easier placement and adjustment.
5. Operating Instructions
5.1 LED Lighting Control
The cabinet features an adjustable LED light system. Use the touch controls on the mirror surface to cycle through 3 color modes (Warm Light 3000K, Natural Light 4500K, Cold Light 6500K) and adjust brightness from 5% to 100%.
Figure 4: LED Color Temperature and Dimmer Controls
5.2 Integrated Power Outlets
The cabinet includes a built-in USB charging port and a standard electrical outlet, providing convenient power for shavers, electric toothbrushes, and other small bathroom appliances. Ensure the cabinet is properly plugged into a wall outlet for these features to function.
Figure 5: Built-in Power Strip with USB and Electrical Outlet
Video 2: Overview of the medicine cabinet's features, including the LED lighting and internal storage.
6. Maintenance
To ensure the longevity and appearance of your medicine cabinet, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth with a mild, non-abrasive cleaner to wipe down the mirror and cabinet surfaces. Avoid harsh chemicals or abrasive materials that could damage the finish or mirror.
- Moisture Protection: The cabinet is crafted from MDF board with a moisture-proof backplane. While designed for bathroom conditions, avoid excessive water exposure. Wipe away any splashes immediately.
- Electrical Components: Ensure all electrical connections remain dry. Do not spray water directly onto the power outlets or LED components.
- Hinges: Periodically check the door hinges for tightness and smooth operation. Adjust if necessary.
7. Troubleshooting
If you encounter any issues with your medicine cabinet, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | No power, loose connection, faulty touch sensor. | Check if the cabinet is plugged in. Ensure the wall outlet has power. Press the touch sensor firmly. If issues persist, contact customer support. |
| Power outlets/USB ports not working. | Cabinet not powered, internal wiring issue. | Verify the cabinet is plugged in and receiving power. Test the wall outlet with another device. If still not working, contact customer support. |
| Doors do not close smoothly or are misaligned. | Hinges need adjustment, obstruction. | Check for any obstructions. Adjust the hinges as per the assembly instructions to correct alignment. |
| Mirror fogs up after showering. | High humidity, no anti-fog feature. | This model does not feature a built-in defogger. Turning on the LED lights prior to showering may help reduce fogging in the illuminated areas due to slight heat generation. Ensure proper bathroom ventilation. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Mepplzian |
| Model Name | LED Medicine Cabinet-2 |
| Color | White |
| Size | 32x24 inch (2 Doors-White) |
| Product Dimensions | 5.2"D x 31.5"W x 23.6"H |
| Item Weight | 19.56 Pounds |
| Weight Limit | 33 Pounds |
| Material | Wood (FSC-certified frame), Glass (shelves) |
| Finish Type | Painted |
| Mounting Type | Wall Mount |
| Special Feature | Illuminated LED (3 color modes, adjustable brightness), Built-in Sockets & USB |
| Number of Shelves | 3 |
| Number of Compartments | 5 |
| Assembly Required | Yes |
9. Warranty and Support
Mepplzian is committed to providing high-quality products and customer service. While specific warranty details are not provided in this document, the manufacturer aims to resolve any issues promptly.
For product support, troubleshooting assistance, or inquiries regarding your medicine cabinet, please visit the official Mepplzian store on Amazon or contact their customer service directly. You can find more information at the Mepplzian Store.