maXpeedingrods Air Suspension Bag Kit + Compressor User Manual

Product Overview

This manual provides essential information for the installation, operation, and maintenance of your maXpeedingrods Air Suspension Bag Kit with Compressor. This kit is designed to enhance vehicle stability and ride quality for compatible models.

Image: Overview of all components included in the maXpeedingrods Air Suspension Bag Kit and Compressor.

Application and Compatibility

This air suspension kit is specifically designed for the following vehicle models:

• For Vauxhall Movano: 2010-2020 FWD models
• For Renault Master: 2010-2020 FWD models

Note:

• Compatible with standard chassis types only, excluding AL-KO chassis.
• Placement on vehicle: Rear Left and Right.

Image: Visual representation of vehicle compatibility for the air suspension kit.

Product Contents

The maXpeedingrods Air Suspension Bag Kit + Compressor includes the following components:

• 2 x Air Springs
• 1 x Air Suspension Compressor
• 1 x Air Panel Gauge
• 2 x Mounting Brackets
• 1 x Air Hose
• Mounting Bolts and Air Fittings

Specifications

General Specifications:

• Condition: New
• Maximum Load Capacity: 4000 kg
• Item Weight: 11.8 Kilograms
• Product Dimensions (L x W x H): 74.7 x 27.8 x 21.7 cm
• Manufacturer Part Number: NE82WI

Air Spring Specifications:

• Pattern Height: 172 mm
• Maximum Height: 230 mm
• Minimum Height: 90 mm
• Stroke: 140 mm

Air Pump Specifications:

• Power: 150 W
• Output Voltage: 12 V
• Maximum Current: 10 A
• Maximum Operating Pressure: 10 bar (1 MPa)

Key Product Characteristics

• Durability: Tested for over 5,000,000 cycles for strength and safety.
• High Burst Pressure: Burst pressure of ≥ 2.0 MPa ensures high compression resistance and reduced noise.
• Air Tightness: Air tightness test ≤ 0.02 MPa guarantees reliable sealing.
• Temperature Resilience: Operates effectively in a temperature range of ≥ -40 ℃ / ≤ 70 ℃ (≥ -40 ℉ / ≤ 158 ℉), thanks to premium natural rubber material.
• Robust Construction: High-quality steel components provide high load capacity and extended service life.
• Improved Ride Quality: Restores original ride height and enhances overall ride comfort.
• Reduced Tire Wear: Contributes to minimizing tire wear.

Image: Benefits of the air suspension system, including stable performance, reduced noise, and decreased tire wear.

Image: Detail of the air spring, emphasizing the use of premium natural rubber and its high burst pressure capability.

Image: Illustration of the wide operating temperature range supported by the air suspension components.

Image: Representation of the 24-hour air sealing and tightness test, demonstrating product reliability.

Installation and Setup

This air suspension kit is designed as a direct replacement part. While the installation is generally practical and bolt-on, professional installation is highly recommended due to the complexity of vehicle suspension systems.

Important Notes for Installation:

• When cutting the air tube, ensure the cut is flat and free of gaps to prevent leaks.
• Consider wrapping the cut end of the air tube with raw tape to further reduce the risk of leakage.
• Instructions are not included with the product. Refer to a qualified mechanic or professional for installation guidance.

Operating Instructions

Once installed, the air suspension system allows for adjustment of ride height and firmness via the air compressor and panel gauge. Consult your installer or a professional for specific operating procedures tailored to your vehicle and driving conditions.

Ensure the air pressure is maintained within the recommended range to optimize performance and longevity of the system.

Maintenance

Regular inspection of the air springs, air lines, and compressor is recommended to ensure optimal performance and prevent issues. Check for any signs of wear, damage, or air leaks periodically.

Keep air lines clean and free from kinks or obstructions. Ensure electrical connections to the compressor are secure.

Troubleshooting

No specific troubleshooting steps are provided in the product information. If you encounter any issues with the air suspension kit, it is strongly advised to consult a professional automotive technician. Common issues might include air leaks, compressor malfunction, or electrical problems, which require specialized tools and expertise for diagnosis and repair.

Warranty and Support

Specific warranty details are not provided in the product description. For information regarding warranty coverage, returns, or technical support, please contact the manufacturer, maXpeedingrods, or the seller directly.

Always refer to official maXpeedingrods documentation or their customer service for the most accurate and up-to-date support information.