Elite Kitchen Supply KR-23BG1

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Elite Kitchen Supply Commercial Glass Door Display Refrigerator KR-23BG1 Instruction Manual

Model: KR-23BG1

Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Elite Kitchen Supply Commercial Glass Door Display Refrigerator, Model KR-23BG1. Please read this manual thoroughly before installation and use, and retain it for future reference.

Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury, follow these basic precautions:

  • Ensure the unit is properly grounded.
  • Do not operate the unit with a damaged power cord or plug.
  • Do not use extension cords or ungrounded adapters.
  • Keep ventilation openings clear of obstructions.
  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
  • Only qualified personnel should perform repairs.
  • Disconnect power before cleaning or servicing.

Setup and Installation

Unpacking

Carefully remove all packaging materials. Inspect the refrigerator for any shipping damage. Report any damage immediately to the carrier and your supplier.

Placement

Position the refrigerator on a strong, level surface capable of supporting its weight (approximately 386 pounds / 175 kg when empty). Ensure adequate ventilation around the unit. Maintain a minimum of 6 inches (15 cm) clearance from walls or other obstructions on all sides and the top for proper airflow and cooling efficiency.

Elite Kitchen Supply Commercial Glass Door Display Refrigerator KR-23BG1 on a pallet

Figure 1: Side view of the KR-23BG1 refrigerator on its shipping pallet.

Technical diagram of Elite Kitchen Supply KR-23BG1 refrigerator with dimensions and internal components

Figure 2: Technical diagram showing dimensions and internal layout of the KR-23BG1.

Electrical Connection

The unit operates on a 115V/60Hz electrical supply. Connect the refrigerator to a dedicated, properly grounded electrical outlet. Do not use multi-outlet adapters or extension cords. The unit draws 1.6A for cooling.

Close-up of the power cord and plug for the refrigerator

Figure 3: Power cord and plug connection point.

Initial Cleaning

Before first use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry completely.

Shelf Installation

Install the heavy-duty PVC coated wire shelves into the desired positions using the provided shelf clips. Ensure shelves are level and securely seated before loading products.

Interior of the refrigerator showing adjustable shelf tracks and included shelves

Figure 4: Interior view with adjustable shelf tracks and shelves.

Operating Instructions

Power On/Off

Locate the power switches, typically on the control panel. Flip the main power switch to the "ON" position. The unit will begin cooling.

Digital Temperature Control

The refrigerator is equipped with a digital display controller for precise temperature management. The default temperature range is 33°F to 41°F (0.5°C to 5°C).

  • Viewing Current Temperature: The display typically shows the current internal temperature.
  • Setting Temperature: Press the "SET" button. Use the up/down arrows to adjust the desired temperature. Press "SET" again to confirm.
  • Defrost Cycle: The unit features automatic defrost. Manual defrost is generally not required.
Digital temperature controller and power switches on the refrigerator

Figure 5: Digital temperature controller and main power switches.

LED Interior Lighting

The interior LED lighting provides clear product visibility. The lighting can typically be controlled via a separate switch on the control panel or automatically with the door opening.

Close-up of the interior LED light strip

Figure 6: Interior LED light strip for product illumination.

Interior of the refrigerator filled with beverage cans on shelves, demonstrating capacity

Figure 7: Refrigerator interior showcasing product storage capacity.

Maintenance

Cleaning

  • Interior: Regularly clean the interior with a mild, non-abrasive cleaner. Remove shelves and clean them separately.
  • Exterior: Wipe down the stainless steel exterior with a soft cloth and a stainless steel cleaner.
  • Condenser Coil: The bottom-mounted refrigeration system includes a removable insulation board for easy access to the condenser coil. Clean the condenser coil regularly (monthly is recommended) to ensure optimal cooling performance and energy efficiency. Use a brush or vacuum cleaner to remove dust and debris.

Door Maintenance

The self-closing door features a 90-degree stay-open feature for convenient loading and unloading. The door also includes a secure locking mechanism. Ensure the door gasket is clean and free of debris to maintain a proper seal.

Troubleshooting

Before contacting service, review these common issues:

  • Unit not cooling: Check power supply, ensure plug is secure, verify temperature settings, and check for obstructions around the condenser coil.
  • Excessive noise: Ensure the unit is level and not touching walls. Check for loose components.
  • Water on floor: Verify drain pan is correctly positioned and drain line is not clogged.
  • Door not closing properly: Check for obstructions, clean door gasket, and ensure the unit is level.

If issues persist, contact qualified service personnel.

Specifications

Product rating label showing model number, voltage, refrigerant, and certifications

Figure 8: Product rating label with detailed specifications and certifications.

Elite Kitchen Supply KR-23BG1 Specifications
FeatureDetail
ModelKR-23BG1
BrandElite Kitchen Supply
Capacity529L (18.7 Cubic Feet) / 20 Cubic Feet
Dimensions (D x W x H)32" x 27" x 82" (81.3 cm x 68.6 cm x 208.3 cm)
Item Weight386 lbs (175 kg)
Voltage115V/60Hz
Amperage1.6A
Temperature Range33°F - 41°F (0.5°C - 5°C)
Installation TypeFreestanding
Defrost SystemAutomatic
Door TypeGlass Display Door, Self-closing with 90° stay-open feature
Door MaterialStainless Steel
Shelves4 Heavy-duty PVC Coated Wire Shelves
Interior LightingLED Interior Light
RefrigerantR290
CertificationsETL Sanitation, ETL US (Conforms to NSF/ANSI STD.7, UL STD.471, CSA STD C22.2 NO.120)
Included ComponentsCommercial Refrigerator
Close-up of the refrigerator's compressor unit

Figure 9: Compressor unit, part of the bottom-mounted refrigeration system.

Warranty and Support

Elite Kitchen Supply provides the following warranty for this product:

  • 3-year warranty on all parts.
  • 6-year warranty on the compressor.
  • 1-year warranty on labor.

Important Warranty Note:

This warranty does not cover equipment used in food trucks, trailers, boats, residential addresses, islands, or built-in decorations. Please review the full warranty terms provided with your purchase or contact Elite Kitchen Supply for details.

For support or warranty claims, please contact Elite Kitchen Supply directly.

Product Video Overview

Video 1: An overview of Elite Kitchen Supply's commercial kitchen equipment, including various refrigeration units and cooking appliances. This video demonstrates the range and quality of products offered by the brand.

© 2025 Elite Kitchen Supply. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.