Introduction
Thank you for choosing the Minisopuru DS802PRO iMac Hub. This comprehensive docking station is designed to seamlessly integrate with your iMac 24 inch (M1/M3/M4 models), expanding its connectivity and storage capabilities. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Key Features:
- 4K@60Hz HDMI Output
- 2.5GbE Ethernet Port
- Dedicated 7.5W USB-C Charging Port
- M.2 SSD Enclosure (up to 4TB, NVMe & SATA)
- Multiple USB Ports (10Gbps & 480Mbps)
- SD/TF Card Slots
- 3.5mm Audio Jack
What's in the Box
Please check the contents of your package. If any items are missing or damaged, contact customer support.
- 1 x Minisopuru iMac Hub (DS802PRO)
- 1 x Cooling Pad
- 1 x User Manual
Image: Package contents of the Minisopuru DS802PRO iMac Hub.
Setup Guide
Follow these steps for the initial setup of your Minisopuru DS802PRO iMac Hub.
1. Connecting the Hub to your iMac:
- Position the Minisopuru DS802PRO hub directly beneath your iMac's stand. The hub is designed to integrate seamlessly with the iMac's aesthetic.
- Locate the dual USB-C connectors on the hub's integrated cable.
- Carefully insert both USB-C connectors into the corresponding Thunderbolt/USB-C ports on the back of your iMac. Ensure a secure connection.
Image: Overview of the Minisopuru DS802PRO iMac Hub with all ports and connections labeled.
Image: The Minisopuru DS802PRO hub seamlessly integrated with an iMac 24 inch, highlighting its hidden bottom design.
Important Connection Note:
If your iMac (M1/M3) has four ports, connect at least one Thunderbolt port to the hub for full functionality.
Image: Visual guide for connecting the hub's dual USB-C cable to the iMac's Thunderbolt ports.
2. Installing an M.2 SSD (Optional):
The hub supports M.2 NVMe or M.2 SATA SSDs up to 4TB. An SSD is not included.
- Unscrew the bottom plate of the hub using the provided screwdriver.
- Align the nut with the PCB slot and push back to secure it.
- Insert your M.2 SSD into the M.2 slot.
- Secure the SSD with the provided screw.
- Finally, close the cover and tighten the screws.
Image: Step-by-step diagram for M.2 SSD installation.
Video: Visual guide on how to install an SSD on the DS802PRO hub.
3. Initializing and Formatting the SSD:
After physical installation, the SSD needs to be initialized and formatted for use with your operating system.
Video: Instructions on how to format an SSD for use.
Video: Guide on how to initialize your SSD on a Mac.
Operating Instructions
The Minisopuru DS802PRO hub provides a variety of ports for enhanced functionality.
1. Using USB Ports and Card Readers:
- USB A Gen2 (10Gbps): Connect high-speed USB devices for fast data transfer.
- USB C Gen2 (10Gbps): Connect USB-C devices for high-speed data transfer.
- USB A 2.0 (480Mbps): Ideal for connecting peripherals like keyboards, mice, or other standard USB devices.
- SD & TF Card Slots: Insert SD or microSD cards for quick data access and transfer.
Image: Demonstrating high-speed file transfer and USB-C charging capabilities.
2. HDMI Display Output:
Connect an external monitor via the HDMI 2.0 port for 4K@60Hz video output.
- Connect an HDMI cable from the hub's HDMI port to your external display.
- Your iMac should automatically detect the external display. You can configure display settings (Mirror Mode or Extend Mode) in your macOS System Settings.
Image: iMac connected to an external display via HDMI, illustrating dual-screen functionality.
3. Ethernet Connection:
For a stable and fast wired network connection, use the 2.5GbE Ethernet port.
- Connect an Ethernet cable from your router/modem to the 2.5GbE port on the hub.
- Your iMac will automatically use the wired connection.
Image: The 2.5GbE Ethernet port in use, providing a fast wired network connection.
4. Audio Output:
Use the 3.5mm audio jack for headphones or external speakers.
- Plug your headphones or speakers into the 3.5mm audio jack on the side of the hub.
- You may need to select "USB Audio Device" as the output in your macOS Sound Settings.
Video: Instructions on how to select the correct audio output on your Mac when using the hub.
Maintenance
To ensure the longevity and optimal performance of your Minisopuru DS802PRO iMac Hub, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surface of the hub. Avoid using liquid cleaners or aerosols, as they may damage the device.
- Storage: Store the hub in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
- Ventilation: Ensure that the hub's ventilation areas are not obstructed to prevent overheating.
Troubleshooting
If you encounter any issues with your Minisopuru DS802PRO iMac Hub, please refer to the following common solutions:
- No Power/Device Not Recognized:
- Ensure both USB-C connectors are fully and securely plugged into your iMac's Thunderbolt ports.
- Restart your iMac.
- Try connecting the hub to different Thunderbolt ports on your iMac.
- External Display Not Working:
- Check the HDMI cable connection between the hub and your monitor.
- Ensure your monitor is set to the correct input source (HDMI).
- Verify display settings in macOS System Settings (Display preferences).
- SSD Not Appearing:
- Ensure the SSD is correctly installed and secured within the enclosure.
- Check Disk Utility in macOS to see if the SSD is detected but unformatted. If so, initialize and format it (refer to 'Initializing and Formatting the SSD' section).
- Try restarting your iMac.
- Slow Data Transfer Speeds:
- Ensure you are using the 10Gbps USB-A or USB-C ports for high-speed devices.
- The actual speed may vary depending on the connected device and cable quality.
- Audio Output Issues:
- Verify that "USB Audio Device" is selected as the output in your macOS Sound Settings.
- Check headphone/speaker connections.
Specifications
| Feature | Detail |
|---|---|
| Model | DS802PRO |
| Input | Dual USB C 3.2 Gen2 |
| HDMI Output | 4K@60Hz |
| Ethernet | 2.5GbE (2500/1000/100/10Mbps) |
| USB C Charging | 7.5W (Max 480Mbps data) |
| USB A Gen2 | Max 10Gbps (x1) |
| USB C Gen2 | Max 10Gbps (x1) |
| USB A 2.0 | Max 480Mbps (x2) |
| SD/TF Card Slot | Max 104 MB/s |
| Audio Port | 3.5mm Jack |
| SSD Slot | M.2 NVMe & SATA SSD (Max 10Gbps / Max 4TB) |
| Compatible Devices | iMac 24 inch 2021/2023/2024 (M1/M3/M4) |
| Dimensions | 5.3 x 5.9 x 0.85 inches |
| Weight | 375g |
| Cable Length | 15.7 inches |
Warranty and Support
Warranty Information:
The Minisopuru DS802PRO iMac Hub comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or external factors.
Customer Support:
For technical assistance, troubleshooting, or warranty claims, please contact Minisopuru customer support through the retailer where you purchased the product or visit the official Minisopuru website for contact information.
Please have your product model number (DS802PRO) and proof of purchase ready when contacting support.