1. Introduction
The WONLINK 1200Mbps WiFi Extender is designed to expand your existing Wi-Fi coverage, eliminate dead zones, and provide a stable, high-speed internet connection throughout your home or office. This device supports dual-band Wi-Fi (2.4GHz and 5GHz) for optimal performance and is compatible with most standard routers.
Image: The WONLINK WiFi Extender, a black device with four antennas, plugged into a wall socket, illustrating its function of extending Wi-Fi signals.
Image: A visual representation of the WONLINK WiFi Extender providing extended network coverage throughout a modern, multi-story home, highlighting its ability to eliminate dead zones.
2. Setup Guide
2.1. Powering On
- Plug the WONLINK WiFi Extender into an electrical outlet near your main router.
- Wait for the power indicator light to turn solid blue, indicating it is ready for setup.
2.2. Connection Methods
There are two primary methods to set up your WiFi Extender: using the WPS button or via a web browser.
Method A: WPS (Wi-Fi Protected Setup)
- Press the WPS button on your main router.
- Within 2 minutes, press the WPS button on the WONLINK WiFi Extender.
- Wait for the signal indicator lights on the extender to turn solid blue, indicating a successful connection. The extender will automatically adopt your router's Wi-Fi name with an "_EXT" suffix (e.g., MyHome_EXT).
Method B: Web Browser Setup
- Plug the extender into an electrical outlet.
- On your computer or smartphone, connect to the Wi-Fi network named "WONLINK_XXXX" (XXXX will be the last four digits of the extender's MAC address). No password is required for the initial connection.
- Open a web browser (e.g., Chrome, Firefox) and type 192.168.10.1 or re.wonlink.net into the address bar and press Enter.
- Enter the default username and password (usually admin for both).
- Follow the on-screen instructions to select your home Wi-Fi network and enter its password.
- Choose whether to keep the same Wi-Fi name or create a new one for the extended network.
- Confirm settings and wait for the extender to restart. Once restarted, the signal indicator lights should be solid blue.
Image: A visual guide demonstrating the WPS one-tap setup process and highlighting the fast Ethernet port on the WONLINK WiFi Extender.
3. Operating the Extender
3.1. Optimal Placement
After successful setup, unplug the extender and move it to a location halfway between your router and the Wi-Fi dead zone. Ensure the signal indicator lights remain solid blue, indicating a good signal from the router. Avoid placing the extender near large metal objects, microwave ovens, or other devices that may cause interference.
3.2. Connecting Devices
Once the extender is set up and optimally placed, your devices (smartphones, tablets, laptops, smart TVs, gaming consoles, etc.) can connect to the extended Wi-Fi network just as they would to any other Wi-Fi network. Look for the network name you configured during setup (e.g., MyHome_EXT).
Image: An illustration showcasing the wide compatibility of the WONLINK WiFi Extender with a variety of devices, including laptops, smartphones, tablets, and smart TVs.
3.3. Ethernet Port Usage
The extender features an Ethernet port. You can use this port to connect a wired device (like a desktop computer, gaming console, or smart TV) to the extended network, providing a stable and fast wired connection.
Image: A graphic illustrating how the WONLINK WiFi Extender helps create a 'no-lag, no-buffer zone' for activities like online gaming, video conferences, and 4K HD video streaming.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the extender. Do not use liquid cleaners or aerosols.
- Firmware Updates: Periodically check the WONLINK official website for firmware updates. Keeping your firmware updated ensures optimal performance and security.
- Ventilation: Ensure the extender is placed in a well-ventilated area to prevent overheating. Do not cover the ventilation holes.
- Resetting: If the extender is not functioning correctly, you may perform a factory reset by pressing and holding the reset button (often combined with the WPS button) for about 10 seconds until the lights flash. Note that this will erase all custom settings, and you will need to set up the extender again.
5. Troubleshooting
This section addresses common issues you might encounter.
Image: A visual representation of common questions and answers regarding the WONLINK WiFi Extender's performance and setup issues.
Q: I have successfully established a connection, but the internet speed is slow. Is there a way to improve it?
- Try reducing the distance between the WiFi Extender and the router, and avoid obstacles such as thick walls and metal.
- Install it within a strong and stable router signal spot. About 20 feet from your router would be ideal.
- Recommended setup: In a good Wi-Fi signal environment, extend your router's 5GHz band and connect the extender's 2.4GHz band with your devices, which will maximize the extender's performance.
Q: What should I do if I cannot access the configuration page?
- Confirm that the lights are on when you plug it into the electric outlet.
- Reset the extender to factory mode, make sure you connect to the WONLINK Wi-Fi network first, then try to log in to the page.
- Try to use another phone or browser to set it up.
Q: Connected but No Internet after Finished Setup?
- Log in to the configuration page and check whether "Status" displays "Repeater Connected". If not, reset the WiFi extender and set it up again. Make sure you enter the correct password which is the same as your router password during setup.
6. Specifications
| Feature | Description |
|---|---|
| Model Number | WL-NE3501 |
| Data Transfer Rate | Up to 1200 Mbps (867 Mbps on 5GHz, 300 Mbps on 2.4GHz) |
| Frequency Bands | 2.4 GHz & 5 GHz (Dual Band) |
| Antennas | 4 High-Gain External Antennas |
| Ethernet Port | 1 x Fast Ethernet Port |
| Security | WPA/WPA2, WPA-PSK/WPA2-PSK Encryption |
| Compatible Devices | WiFi-enabled devices (routers, smartphones, tablets, laptops, computers, smart TVs, gaming consoles, printers, security cameras, etc.) |
| Item Weight | 8.1 ounces |
| Package Dimensions | 8.27 x 3.78 x 3.03 inches |
Image: An exploded view showing the internal components of the WONLINK WiFi Extender, highlighting its advanced dual-core chip, overvoltage protection, and smart LED indicators.
Image: A comparison graphic illustrating the superior signal strength and reception capability of the WONLINK WiFi Extender, attributed to its four high-gain external antennas and advanced chip.
Image: A visual demonstrating the dual-band capabilities of the WONLINK WiFi Extender, showing 5GHz (867Mbps) and 2.4GHz (300Mbps) for faster streaming and uninterrupted internet connection.
7. Support
For further assistance or technical support, please visit the official WONLINK website or contact their customer service. Refer to the product packaging or the WONLINK brand store for specific contact details.
You can visit the WONLINK Brand Store for more information: WONLINK Store
