WONLINK

Overview

This document provides a quick installation guide for the WONLINK WL-NE3503 WiFi Repeater.

Product Name: WONLINK NE3503B

Features:

• 1200Mbps Dual Band (5GHz & 2.4GHz)
• Powerful WiFi Amplifier
• Compatible with Internet Boxes
• Extends WiFi coverage up to 120㎡

This guide is available in multiple languages: English, French, Spanish, German, Italian, Portuguese, and Chinese.

Important Information

⚠ Please read this guide carefully before installation.

This device is designed to enhance your wireless network by repeating and extending the WiFi signal. It helps eliminate dead zones and provides a more stable connection in areas far from the main router.

Diagram Description: The first diagram illustrates the typical use case for a WiFi repeater. It shows a house with a router inside, emitting WiFi signals. The repeater is placed to extend these signals to areas of the house that are further away from the router and experience weak or no WiFi coverage.

Installation Steps

Diagram Description: The second diagram depicts the physical mounting of the WONLINK NE3503B. It shows the device being attached to a mounting bracket, which is then secured to a wall or pole, indicating a wall-mount or pole-mount installation option.

Follow these steps to install your WONLINK NE3503B:

1. Connect to Power: Plug the repeater into a power outlet.
2. Access Configuration Interface: Open a web browser on a device connected to the repeater's default WiFi network (often named something like "WONLINK-SETUP" or similar, check device label).

Configuration via Web Interface:

The repeater is configured through a web-based interface. The following screenshots show the typical configuration process:

Login

Access the login page by entering the repeater's IP address (e.g., 192.168.1.254) in your browser. The default credentials are:

• Username: admin
• Password: admin

System Settings

After logging in, you will typically see a system settings page where you can configure basic device information:

• Device Name: WONLINK-NE3503B
• Time Zone: UTC (or select your local time zone)
• Language: English (or select your preferred language)
• Firmware Version: V1.0.0 (or the latest available)

Wireless Settings

Configure the WiFi network names (SSIDs) and security for the extended network:

• 2.4GHz SSID: WONLINK-EXTENDER-2.4G (default, can be changed)
• 5GHz SSID: WONLINK-EXTENDER-5G (default, can be changed)
• Security Mode: WPA2-PSK (recommended)
• Password: [Enter a strong password for your WiFi network]
• Channel (2.4GHz): Auto (recommended)
• Channel (5GHz): Auto (recommended)

Operation Mode Configuration

Select the desired operating mode for the repeater. For extending WiFi, choose "Repeater Mode":

• Operation Mode: Repeater Mode
• Scan for WiFi Networks: Click to scan for available WiFi networks.
• Select Network (2.4GHz): Choose your existing 2.4GHz WiFi network from the list.
• Select Network (5GHz): Choose your existing 5GHz WiFi network from the list.
• Enter Password: Input the password for the selected WiFi networks.
• Apply: Click the "Apply" button to save the settings and restart the repeater.

Specifications and Compliance

Model: WL-NE3503

Power Input: 100-240V~50/60Hz 0.3A

Power Output: 5VDC 1A

Compliance Marks:

• CE Mark: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
• FCC Mark: Indicates compliance with Federal Communications Commission regulations for electronic devices sold in the United States.
• RoHS Compliant: Indicates that the product adheres to the Restriction of Hazardous Substances directive, limiting the use of certain hazardous materials.
• Recycling Symbol: Indicates that the product should be disposed of responsibly.
• Battery Symbol: Indicates the presence of a battery or that the device contains battery components.